Re: [ES40-developers] Can't Ctrl/Por Ctrl/C the SDL Console, and UpArrow hangs

[Camiel V. <iam...@gm...>]

Hello David,

This ties in with a discussion I've had with Brian on this mailing list;

The scanset 2 scancodes for the left control key is 0x14; this is
delivered fine. It appears now, however, that SRM is expecting scanset
3 codes; in this set, 0x14 means Caps Lock.

This is an important clue in sorting this mess out. I think I might
have it in a few hours...

Camiel.

On Feb 8, 2008 2:23 AM, Hittner, David T. <dav...@ng...> wrote:
>
>
>
> As I'm testing VMS booting, I've run into these SDL input issues:
>   1) A failed MOP boot where it retries forever, unless you type Ctrl/C to
> exit, or
>   2) A BUGCHECK memory dump, where Ctrl/P would normally stop it
>   3) If you're sitting on the SRM command line in the SDL console, and you
> hit UpArrow by mistake, the SDL console hangs forever
>
> Is this easily fixable?
>
> It also still has the problem where hitting the keypad 'enter' key hangs the
> SDL console forever.
>
> All these behavior issues are on Windows XP 32-bit.
>
> Dave