Hi Brian,
Thanks for this patch. I think having the Tru64 driver for the NIC is
a great development aid.
Camiel.
On Wed, Feb 27, 2008 at 9:51 PM, Brian Wheeler <bdw...@in...> wrote:
> It looks like the SROM on the NIC has to be properly checksummed before
> Tru64 will use it. I found the tru64 device driver kit sample files
> online which contained the tulip driver as a sample! I've attached the
> files in case there are other problems we have later with the NIC.
>
> After copying the crc routine and working it into the ResetNIC function,
> tru64 likes the device:
>
> tu0: DECchip 21143: Revision: 3.0
> tu0: auto negotiation capable device
> tu0 at pci0 slot 4
> tu0: DEC TULIP (10/100) Ethernet Interface, hardware address: 08-00-2B-E5-40-00
> tu0: no console mode: defaulting to 10BaseT (UTP) port: half duplex
>
>
> For tcp/ip it doesn't seem to connect to the outside world, but I can
> run ifconfig and configure it without errors.
>
> Brian
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Es40-developers mailing list
> Es4...@li...
> https://lists.sourceforge.net/lists/listinfo/es40-developers
>
>
|
