Thread: [ES40-developers] tru64 boot probs
Status: Alpha
Brought to you by:
iamcamiel
Menu
▾
▴
es40-developers
|
From: Fausto S. <fa...@un...> - 2008-06-06 21:16:59
|
Hello all,
I'm trying again the Tru64 installation with the latest CVS.
I remembered that floppy code now was ok, but I got some errors during
the boot of "installation cd".
I'm using a real cdrom, not the ISO image.
Here they are:
(During boot of Tru64 5.1 - on the es40 console)
DMA-I-RESET: DMA 0 reset.DMA-I-RESET: DMA 1 reset.dma: command register
0 writte
n with 10
dma: command register 1 written with 10
dma: mode register 1 for channel 7 written with 0
Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 13 written: 03
dma: mode register 1 for channel 7 written with 0
Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 13 written: 03
dma: mode register 1 for channel 7 written with 0
Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 13 written: 03
dma: mode register 1 for channel 7 written with 0
Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 13 written: 03
dma: mode register 0 for channel 3 written with 0
Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 12 written: 03
dma: mode register 0 for channel 2 written with 0
Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify
dma: extended mode register 12 written: 02
at floppy probe, instead these are the errors on alpha console:
<FDI: FATAL ERROR #114 sra:00000000 dor:00000000 msr:00000000>
<FDI: FATAL ERROR #125 sra:00000000 dor:00000000 msr:00000000>
fd internal driver error: FDI PROBE FAIL (A,11).
fdi0 not probed
then I have some errors (timeout) on hard-disks (on alpha console):
ata0 at pci0 slot 15
ata0: ACER M1543C
scsi0 at ata0 slot 0 rad 0
cam_logger: SCSI event packet
cam_logger: bus 1 target 0 lun 0
ss_perform_timeout
timeout on request on the bus, scheduled bus reset
Active CCB at time of error
cam_logger: SCSI event packet
cam_logger: bus 1 target 0 lun 0
ss_perform_timeout
timeout on request on the bus, scheduled bus reset
Active CCB at time of error
(while on es40 console I have):
ide1.0 aborting on command 0xec
ide1.0 aborting on command 0xc6
ide1.0 aborting on command 0xc6
ide1.0 aborting on command 0xc6
regards,
Fausto
|
|
From: Fausto S. <fa...@un...> - 2008-06-13 12:22:17
|
Hello, i did other test... it seems IDE cdrom doesn't work very well under Tru64. My best configuration right now is IDE disk, and SCSI cdrom, but even in such case I have some timeout error, like that one I described in my previous email. If I try with a full IDE configuration I'm not able to start the installation With a full SCSI configuration the emulator crash when Tru64 try to format the disk. regards, fausto Fausto Saporito ha scritto: > Hello all, > > I'm trying again the Tru64 installation with the latest CVS. > I remembered that floppy code now was ok, but I got some errors during > the boot of "installation cd". > I'm using a real cdrom, not the ISO image. > > Here they are: > > (During boot of Tru64 5.1 - on the es40 console) > > DMA-I-RESET: DMA 0 reset.DMA-I-RESET: DMA 1 reset.dma: command register > 0 writte > n with 10 > dma: command register 1 written with 10 > dma: mode register 1 for channel 7 written with 0 > Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify > dma: extended mode register 13 written: 03 > dma: mode register 1 for channel 7 written with 0 > Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify > dma: extended mode register 13 written: 03 > dma: mode register 1 for channel 7 written with 0 > Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify > dma: extended mode register 13 written: 03 > dma: mode register 1 for channel 7 written with 0 > Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify > dma: extended mode register 13 written: 03 > dma: mode register 0 for channel 3 written with 0 > Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify > dma: extended mode register 12 written: 03 > dma: mode register 0 for channel 2 written with 0 > Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify > dma: extended mode register 12 written: 02 > > at floppy probe, instead these are the errors on alpha console: > > <FDI: FATAL ERROR #114 sra:00000000 dor:00000000 msr:00000000> > <FDI: FATAL ERROR #125 sra:00000000 dor:00000000 msr:00000000> > fd internal driver error: FDI PROBE FAIL (A,11). > > fdi0 not probed > > then I have some errors (timeout) on hard-disks (on alpha console): > > ata0 at pci0 slot 15 > ata0: ACER M1543C > scsi0 at ata0 slot 0 rad 0 > cam_logger: SCSI event packet > cam_logger: bus 1 target 0 lun 0 > ss_perform_timeout > timeout on request on the bus, scheduled bus reset > Active CCB at time of error > cam_logger: SCSI event packet > cam_logger: bus 1 target 0 lun 0 > ss_perform_timeout > timeout on request on the bus, scheduled bus reset > Active CCB at time of error > > (while on es40 console I have): > > ide1.0 aborting on command 0xec > ide1.0 aborting on command 0xc6 > ide1.0 aborting on command 0xc6 > ide1.0 aborting on command 0xc6 > > regards, > Fausto > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Es40-developers mailing list > Es4...@li... > https://lists.sourceforge.net/lists/listinfo/es40-developers > > > |
|
From: Fausto S. <fa...@un...> - 2008-06-13 12:50:13
|
Hello, just a little update, with FULL SCSI config, I have this error during the boot: Assigning a cluster device number to root prom_getenv: Unable to convert 'IDE 0 15 0 0 0 0 0' cdisk_ioctl: XPT_GET_LOG failed device_translate: device cannot be translated 'IDE 0 15 0 0 0 0 0' regards, fausto Fausto Saporito ha scritto: > Hello, > i did other test... it seems IDE cdrom doesn't work very well under Tru64. > My best configuration right now is IDE disk, and SCSI cdrom, but even in > such case I have some timeout error, like that one I described in my > previous email. > > If I try with a full IDE configuration I'm not able to start the > installation > > With a full SCSI configuration the emulator crash when Tru64 try to > format the disk. > > regards, > fausto > > Fausto Saporito ha scritto: > >> Hello all, >> >> I'm trying again the Tru64 installation with the latest CVS. >> I remembered that floppy code now was ok, but I got some errors during >> the boot of "installation cd". >> I'm using a real cdrom, not the ISO image. >> >> Here they are: >> >> (During boot of Tru64 5.1 - on the es40 console) >> >> DMA-I-RESET: DMA 0 reset.DMA-I-RESET: DMA 1 reset.dma: command register >> 0 writte >> n with 10 >> dma: command register 1 written with 10 >> dma: mode register 1 for channel 7 written with 0 >> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >> dma: extended mode register 13 written: 03 >> dma: mode register 1 for channel 7 written with 0 >> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >> dma: extended mode register 13 written: 03 >> dma: mode register 1 for channel 7 written with 0 >> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >> dma: extended mode register 13 written: 03 >> dma: mode register 1 for channel 7 written with 0 >> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >> dma: extended mode register 13 written: 03 >> dma: mode register 0 for channel 3 written with 0 >> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >> dma: extended mode register 12 written: 03 >> dma: mode register 0 for channel 2 written with 0 >> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >> dma: extended mode register 12 written: 02 >> >> at floppy probe, instead these are the errors on alpha console: >> >> <FDI: FATAL ERROR #114 sra:00000000 dor:00000000 msr:00000000> >> <FDI: FATAL ERROR #125 sra:00000000 dor:00000000 msr:00000000> >> fd internal driver error: FDI PROBE FAIL (A,11). >> >> fdi0 not probed >> >> then I have some errors (timeout) on hard-disks (on alpha console): >> >> ata0 at pci0 slot 15 >> ata0: ACER M1543C >> scsi0 at ata0 slot 0 rad 0 >> cam_logger: SCSI event packet >> cam_logger: bus 1 target 0 lun 0 >> ss_perform_timeout >> timeout on request on the bus, scheduled bus reset >> Active CCB at time of error >> cam_logger: SCSI event packet >> cam_logger: bus 1 target 0 lun 0 >> ss_perform_timeout >> timeout on request on the bus, scheduled bus reset >> Active CCB at time of error >> >> (while on es40 console I have): >> >> ide1.0 aborting on command 0xec >> ide1.0 aborting on command 0xc6 >> ide1.0 aborting on command 0xc6 >> ide1.0 aborting on command 0xc6 >> >> regards, >> Fausto >> >> ------------------------------------------------------------------------- >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services for >> just about anything Open Source. >> http://sourceforge.net/services/buy/index.php >> _______________________________________________ >> Es40-developers mailing list >> Es4...@li... >> https://lists.sourceforge.net/lists/listinfo/es40-developers >> >> >> >> > > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Es40-developers mailing list > Es4...@li... > https://lists.sourceforge.net/lists/listinfo/es40-developers > > > |
|
From: Fausto S. <fa...@un...> - 2008-06-13 13:43:58
|
Hello all, latest update... this is the big crash :-) with full SCSI config. Creating the root file system on device dsk0a panic (cpu 0): ialloc: dup alloc syncing disks... done DUMP: Warning: no disk available for dump. DUMP: first crash dump failed: attempting memory dump... DUMP: compressing 66704KB into 933911KB memory... DUMP: Starting Address Ending Address Size(MB) DUMP: ------------------ ------------------ -------- DUMP: 0xfffffc003fb50000 - 0xfffffc003ff51fef 4.0 (indicator) DUMP: Writing data Fausto Saporito ha scritto: > Hello, > > just a little update, with FULL SCSI config, I have this error during > the boot: > > Assigning a cluster device number to root > prom_getenv: Unable to convert 'IDE 0 15 0 0 0 0 0' > cdisk_ioctl: XPT_GET_LOG failed > device_translate: device cannot be translated 'IDE 0 15 0 0 0 0 0' > > regards, > fausto > > Fausto Saporito ha scritto: > >> Hello, >> i did other test... it seems IDE cdrom doesn't work very well under Tru64. >> My best configuration right now is IDE disk, and SCSI cdrom, but even in >> such case I have some timeout error, like that one I described in my >> previous email. >> >> If I try with a full IDE configuration I'm not able to start the >> installation >> >> With a full SCSI configuration the emulator crash when Tru64 try to >> format the disk. >> >> regards, >> fausto >> >> Fausto Saporito ha scritto: >> >> >>> Hello all, >>> >>> I'm trying again the Tru64 installation with the latest CVS. >>> I remembered that floppy code now was ok, but I got some errors during >>> the boot of "installation cd". >>> I'm using a real cdrom, not the ISO image. >>> >>> Here they are: >>> >>> (During boot of Tru64 5.1 - on the es40 console) >>> >>> DMA-I-RESET: DMA 0 reset.DMA-I-RESET: DMA 1 reset.dma: command register >>> 0 writte >>> n with 10 >>> dma: command register 1 written with 10 >>> dma: mode register 1 for channel 7 written with 0 >>> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >>> dma: extended mode register 13 written: 03 >>> dma: mode register 1 for channel 7 written with 0 >>> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >>> dma: extended mode register 13 written: 03 >>> dma: mode register 1 for channel 7 written with 0 >>> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >>> dma: extended mode register 13 written: 03 >>> dma: mode register 1 for channel 7 written with 0 >>> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >>> dma: extended mode register 13 written: 03 >>> dma: mode register 0 for channel 3 written with 0 >>> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >>> dma: extended mode register 12 written: 03 >>> dma: mode register 0 for channel 2 written with 0 >>> Mode: Demand, Address Decrement, Autoinit Disable, Command: Verify >>> dma: extended mode register 12 written: 02 >>> >>> at floppy probe, instead these are the errors on alpha console: >>> >>> <FDI: FATAL ERROR #114 sra:00000000 dor:00000000 msr:00000000> >>> <FDI: FATAL ERROR #125 sra:00000000 dor:00000000 msr:00000000> >>> fd internal driver error: FDI PROBE FAIL (A,11). >>> >>> fdi0 not probed >>> >>> then I have some errors (timeout) on hard-disks (on alpha console): >>> >>> ata0 at pci0 slot 15 >>> ata0: ACER M1543C >>> scsi0 at ata0 slot 0 rad 0 >>> cam_logger: SCSI event packet >>> cam_logger: bus 1 target 0 lun 0 >>> ss_perform_timeout >>> timeout on request on the bus, scheduled bus reset >>> Active CCB at time of error >>> cam_logger: SCSI event packet >>> cam_logger: bus 1 target 0 lun 0 >>> ss_perform_timeout >>> timeout on request on the bus, scheduled bus reset >>> Active CCB at time of error >>> >>> (while on es40 console I have): >>> >>> ide1.0 aborting on command 0xec >>> ide1.0 aborting on command 0xc6 >>> ide1.0 aborting on command 0xc6 >>> ide1.0 aborting on command 0xc6 >>> >>> regards, >>> Fausto >>> >>> ------------------------------------------------------------------------- >>> Check out the new SourceForge.net Marketplace. >>> It's the best place to buy or sell services for >>> just about anything Open Source. >>> http://sourceforge.net/services/buy/index.php >>> _______________________________________________ >>> Es40-developers mailing list >>> Es4...@li... >>> https://lists.sourceforge.net/lists/listinfo/es40-developers >>> >>> >>> >>> >>> >> ------------------------------------------------------------------------- >> Check out the new SourceForge.net Marketplace. >> It's the best place to buy or sell services for >> just about anything Open Source. >> http://sourceforge.net/services/buy/index.php >> _______________________________________________ >> Es40-developers mailing list >> Es4...@li... >> https://lists.sourceforge.net/lists/listinfo/es40-developers >> >> >> >> > > > ------------------------------------------------------------------------- > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > _______________________________________________ > Es40-developers mailing list > Es4...@li... > https://lists.sourceforge.net/lists/listinfo/es40-developers > > > |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X