Recent changes to Documentation

Documentation modified by Jonas Thedering

Jonas Thedering — Tue, 27 Feb 2018 21:14:46 -0000

--- v14
+++ v15
@@ -43,6 +43,18 @@

 This section describes approaches to solve possible problems impeding the successful operation of Equalizer APO.

+## Configurator
+By default, Equalizer APO will try to keep the functionality of other APOs that have been shipped with the sound card driver ("original APOs"). In some cases, this causes instabilities in the audio processing. The Configurator offers troubleshooting options to adjust how the original APOs are used.
+
+If you experience instabilities during playback or recording when using Equalizer APO, you can try to disable the usage of the original APOs in the Configurator:
+1. Select your audio device by clicking on its connection name.
+2. Enable the troubleshooting options.
+3. Uncheck both "Use original APO" checkboxes.
+ (click to enlarge)
+Note that you will lose all features that the sound card driver realizes through its APOs. You can also try to uncheck only one of the check boxes to preserve some functionality.
+
+Some sound card drivers disable options when they detect that another APO has been registered. You can uncheck one of the "Install APO" checkboxes to only install Equalizer APO in the pre-mix or post-mix stage. For the other stage, the original APO will be registered then, which may help to recover some options of the sound card driver.
+
 ## Control Panel
 If you installed Equalizer APO and no changes to the configuration file lead to any changes in the signal, APOs might have been disabled for the device in the Control Panel.
 To check this, open Start Menu -> Control Panel -> Sound and double click on your audio device to open the properties dialog.

Discussion for Documentation page

Jonas Thedering — Sat, 29 Oct 2016 02:51:31 -0000

Robert, did you get it to work? Great EQ but can be hard to configure.

On Thu, Oct 27, 2016 at 3:05 PM, Robert Steel cwl900@users.sf.net wrote:

Thanks

On Friday, 28 October 2016, Glenn Odagawa flipflops2001@users.sf.net
wrote:

Here's the default [example.txt] file also.

On Thu, Oct 27, 2016 at 9:35 AM, Glenn Odagawa glenn.odagawa@gmail.com
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');
wrote:

There is no [config.exe] or [example.exe] in EqualizerAPO. There is
[config.txt] and [example.txt]. If you edit the [(dirve):\Program
Files\EqualizerAPO\config.txt] file with Notepad or any other text editor
it should read something like this:
Common preamp

Preamp: +0 dB

Channel: L
Preamp: +0 dB
Include: example.txt

Channel: R
Preamp: +0 dB
Include: example.txt

If you have modified your [config.txt] file, I've attached the default
file to this message.

Regards,

-Glenn

On Wed, Oct 26, 2016 at 10:11 PM, Robert Steel cwl900@users.sf.net
javascript:_e(%7B%7D,'cvml','cwl900@users.sf.net');
wrote:

Hi,

I am wandering, How do i Change config.exe BACK to example.exe???

I did the change and it says that there is somthing wrong with it and i
tried reinstalling it but it didn't work.

Regards
Robert

Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/equalizerapo/wiki/Documentation/

To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/

--

Glenn S. Odagawa

Chicago, IL

glenn.odagawa@gmail.com glenn.odagawa@gmail.com
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');
glenn.odagawa@gmail.com glenn.odagawa@gmail.com
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');

glenlivet1p@yahoo.com glenlivet1p@yahoo.com
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');
glenlivet1p@yahoo.com glenlivet1p@yahoo.com
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');

http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf
http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf
http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf
http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf
http://www.TheLayeredMix.co.nf

(773) 747-7546 <%28773%29%20747-7546> <%28773%29%20747-7546>(872)
235-7783 <%28872%29%20235-7783> <%28872%29%20235-7783>

--

Glenn S. Odagawa

Chicago, IL

glenn.odagawa@gmail.com glenn.odagawa@gmail.com
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');
glenn.odagawa@gmail.com glenn.odagawa@gmail.com
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');

glenlivet1p@yahoo.com glenlivet1p@yahoo.com
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');
glenlivet1p@yahoo.com glenlivet1p@yahoo.com
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');

http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf
http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf
http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf
http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf
http://www.TheLayeredMix.co.nf
(773) 747-7546 <%28773%29%20747-7546>(872) 235-7783
<%28872%29%20235-7783>

Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/equalizerapo/wiki/Documentation/

To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/

Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/equalizerapo/wiki/Documentation/

To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/

Discussion for Documentation page

Jonas Thedering — Thu, 27 Oct 2016 18:34:25 -0000

Thanks

On Friday, 28 October 2016, Glenn Odagawa flipflops2001@users.sf.net
wrote:

Here's the default [example.txt] file also.

On Thu, Oct 27, 2016 at 9:35 AM, Glenn Odagawa glenn.odagawa@gmail.com
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');
wrote:

There is no [config.exe] or [example.exe] in EqualizerAPO. There is
[config.txt] and [example.txt]. If you edit the [(dirve):\Program
Files\EqualizerAPO\config.txt] file with Notepad or any other text editor
it should read something like this:
Common preamp

Preamp: +0 dB

Channel: L
Preamp: +0 dB
Include: example.txt

Channel: R
Preamp: +0 dB
Include: example.txt

If you have modified your [config.txt] file, I've attached the default
file to this message.

Regards,

-Glenn

On Wed, Oct 26, 2016 at 10:11 PM, Robert Steel cwl900@users.sf.net
javascript:_e(%7B%7D,'cvml','cwl900@users.sf.net');
wrote:

Hi,

I am wandering, How do i Change config.exe BACK to example.exe???

I did the change and it says that there is somthing wrong with it and i
tried reinstalling it but it didn't work.

Regards
Robert

Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/equalizerapo/wiki/Documentation/

To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/

--

Glenn S. Odagawa

Chicago, IL

glenn.odagawa@gmail.com
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');
glenn.odagawa@gmail.com
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');

glenlivet1p@yahoo.com
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');
glenlivet1p@yahoo.com
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');

http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf
http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf

(773) 747-7546 <%28773%29%20747-7546>(872) 235-7783
<%28872%29%20235-7783>

--

Glenn S. Odagawa

Chicago, IL

glenn.odagawa@gmail.com
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');
glenn.odagawa@gmail.com
javascript:_e(%7B%7D,'cvml','glenn.odagawa@gmail.com');

glenlivet1p@yahoo.com
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');
glenlivet1p@yahoo.com
javascript:_e(%7B%7D,'cvml','glenlivet1p@yahoo.com');

http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf
http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf

(773) 747-7546(872) 235-7783

Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/equalizerapo/wiki/Documentation/

To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/

Discussion for Documentation page

Jonas Thedering — Thu, 27 Oct 2016 15:08:30 -0000

There is no [config.exe] or [example.exe] in EqualizerAPO. There is
[config.txt] and [example.txt]. If you edit the [(dirve):\Program
Files\EqualizerAPO\config.txt] file with Notepad or any other text editor
it should read something like this:

Common preamp

Preamp: +0 dB

Channel: L
Preamp: +0 dB
Include: example.txt

Channel: R
Preamp: +0 dB
Include: example.txt

If you have modified your [config.txt] file, I've attached the default file
to this message.

Regards,

-Glenn

On Wed, Oct 26, 2016 at 10:11 PM, Robert Steel cwl900@users.sf.net wrote:

Hi,

I am wandering, How do i Change config.exe BACK to example.exe???

I did the change and it says that there is somthing wrong with it and i
tried reinstalling it but it didn't work.

Regards
Robert

Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/equalizerapo/wiki/Documentation/

To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/

Glenn S. Odagawa

Chicago, IL

glenn.odagawa@gmail.com glenn.odagawa@gmail.com

glenlivet1p@yahoo.com glenlivet1p@yahoo.com

http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf

(773) 747-7546(872) 235-7783

Discussion for Documentation page

Jonas Thedering — Thu, 27 Oct 2016 15:05:17 -0000

Here's the default [example.txt] file also.

On Thu, Oct 27, 2016 at 9:35 AM, Glenn Odagawa glenn.odagawa@gmail.com
wrote:

There is no [config.exe] or [example.exe] in EqualizerAPO. There is
[config.txt] and [example.txt]. If you edit the [(dirve):\Program
Files\EqualizerAPO\config.txt] file with Notepad or any other text editor
it should read something like this:

Common preamp

Preamp: +0 dB

Channel: L
Preamp: +0 dB
Include: example.txt

Channel: R
Preamp: +0 dB
Include: example.txt

If you have modified your [config.txt] file, I've attached the default
file to this message.

Regards,

-Glenn

On Wed, Oct 26, 2016 at 10:11 PM, Robert Steel cwl900@users.sf.net
wrote:

Hi,

I am wandering, How do i Change config.exe BACK to example.exe???

I did the change and it says that there is somthing wrong with it and i
tried reinstalling it but it didn't work.

Regards
Robert

Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/equalizerapo/wiki/Documentation/

To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/

--

Glenn S. Odagawa

Chicago, IL

glenn.odagawa@gmail.com glenn.odagawa@gmail.com

glenlivet1p@yahoo.com glenlivet1p@yahoo.com

http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf

(773) 747-7546 <%28773%29%20747-7546>(872) 235-7783
<%28872%29%20235-7783>

Glenn S. Odagawa

Chicago, IL

glenn.odagawa@gmail.com glenn.odagawa@gmail.com

glenlivet1p@yahoo.com glenlivet1p@yahoo.com

http://www.TheLayeredMix.co.nf http://www.TheLayeredMix.co.nf

(773) 747-7546(872) 235-7783

Discussion for Documentation page

Robert Steel — Thu, 27 Oct 2016 03:11:16 -0000

Hi,

I am wandering, How do i Change config.exe BACK to example.exe???

I did the change and it says that there is somthing wrong with it and i tried reinstalling it but it didn't work.

Regards
Robert

Discussion for Documentation page

Peter Verbeek — Wed, 14 Sep 2016 09:39:20 -0000

After installing Equalizer APO there should be Equalizer APO 1.1.2 item in the Windows start menu. Within this folder you can start the Configuration Editor. I think there isn't a desktop shortcut to it.

Discussion for Documentation page

Miguel Lopez — Wed, 14 Sep 2016 00:00:27 -0000

Hi, I hope I'm the right section, I just installed Equalizer apo 32 bit, I don't see the configeration editer I've installed it twice still the same thing. I am running win 7, on an older abit motherboard. What is the problem. Thank you in advance

Discussion for Documentation page

Adam Mc — Sat, 09 Jul 2016 17:49:49 -0000

Thanks Glenn. I have a new Skype headset and friends said straight away the sound was more tinny. I've been in the music business for about 30 years, and I'm used to speaking in non-tech terms as many new recording artists don't have any idea about frequencies - hence I talk about bass, mid and treble when explaining things generally as most of the people I work with understand what happens when they move the bass and treble controls on whatever system they use to play their recordings back.
I appreciate the info on the filters too.
Adam

Discussion for Documentation page

Adam Mc — Sat, 09 Jul 2016 08:57:46 -0000

Thank you :)