#8 Flip all bands feature

[Lorenzo Gabriele]

First of all thank you for your great job!
I would advise you about a nice feature you can add easily to eq10q. That is a function to flip all bands. In the screen-shot i attached you can see the simplicity to create separation in the mix that way.
In my opinion that function should be applied on shelve and band filters only (i see no sense in an inverted high/low-pass or an inverted notch).
The function could flip all the bands and the shelves and deactivate all the high/low-pass and the notch filters.

[Pere Ràfols Soler]

I've been thinking about this feature, but I'm afraid to tell you that I don't consider that the effort and the used GUI space to implement that result much useful. I think that this kind of tricks are rarely used in mixing. Moreover, you can achive it setting the needed parameters manually. Plus in eq10q last versions you don't need another instanse of the plugin to do that, for example you can use the mid side mode or L/R mode to do this on diferent stereo channels.

[Lorenzo Gabriele]

Thank you for considering it :) And thank you for your great job :)

2016-06-27 20:14 GMT+02:00 "Pere Ràfols Soler" sapista@users.sf.net:

• status: open --> closed

---

• [feature-requests:#8]
  https://sourceforge.net/p/eq10q/feature-requests/8/ Flip all bands
  feature*

Status: closed
Group: Next_Release_(example)
Labels: flip band bands shelve filter separation
Created: Fri May 29, 2015 04:04 PM UTC by Lorenzo Gabriele
Last Updated: Mon Jun 27, 2016 06:13 PM UTC
Owner: nobody
Attachments:

• Schermata del 2015-05-29 17:54:40.png
  https://sourceforge.net/p/eq10q/feature-requests/8/attachment/Schermata%20del%202015-05-29%2017%3A54%3A40.png
  (133.8 kB; image/png)

First of all thank you for your great job!
I would advise you about a nice feature you can add easily to eq10q. That
is a function to flip all bands. In the screen-shot i attached you can see
the simplicity to create separation in the mix that way.
In my opinion that function should be applied on shelve and band filters
only (i see no sense in an inverted high/low-pass or an inverted notch).
The function could flip all the bands and the shelves and deactivate all
the high/low-pass and the notch filters.

---

Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/eq10q/feature-requests/8/

To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/