Re: [Encode2mpeg-users] v0.6.0 error: libmp3lame complains about <blank> Hz sample rate
Brought to you by:
encode2mpeg
Menu
▾
▴
Re: [Encode2mpeg-users] v0.6.0 error: libmp3lame complains about <blank> Hz sample rate
|
From: Adam M. <ha...@gm...> - 2006-10-19 05:08:26
|
On 10/18/06, Giacomo Comes <co...@na...> wrote:
>
> For some reason encode2mpeg is failing to detect the sample rate of
> input.mpg.
> If you add -srate 48000 it should skip the check.
done. Encoding does appear to be happening, but I saw this:
/home/adamm/bin/encode2mpeg: line 4477: ((: <10602: syntax error: operand
expected (error token is "<10602")
I'll know sometime in the next 10 hours if it worked. Perhaps it's time for
a CPU upgrade. :)
Please run this command:
> mplayer -msglevel identify=6 -vo md5sum:outfile=/dev/null -ao null
> -nocache -frames 0 input.mpg -aid 128 -v
> and post the output
Ok, here it is. By the way... input.mpg is 2.2GB.
MPlayer 1.0pre8-4.1.1 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz (Family: 15, Model: 1,
Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
get_path('codecs.conf') -> '/home/adamm/.mplayer/codecs.conf'
Reading /home/adamm/.mplayer/codecs.conf: Can't open
'/home/adamm/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: Can't open '/etc/mplayer/codecs.conf': No
such file or directory
Using built-in default codecs.conf.
CommandLine: '-msglevel' 'identify=6' '-vo' 'md5sum:outfile=/dev/null' '-ao'
'null' '-nocache' '-frames' '0' 'input.mpg' '-aid' '128' '-v'
init_freetype
get_path('font/font.desc') -> '/home/adamm/.mplayer/font/font.desc'
font: can't open file: /home/adamm/.mplayer/font/font.desc
Font /usr/share/mplayer/font/font.desc loaded successfully! (206 chars)
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
Using Linux hardware RTC timing (1024Hz).
get_path('input.conf') -> '/home/adamm/.mplayer/input.conf'
Can't open input config file /home/adamm/.mplayer/input.conf: No such file
or directory
Can't open input config file /etc/mplayer/input.conf: No such file or
directory
Falling back on default (hardcoded) input config
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support.
You will not be able to use your remote control.
get_path('input.mpg.conf') -> '/home/adamm/.mplayer/input.mpg.conf'
Playing input.mpg.
get_path('sub/') -> '/home/adamm/.mplayer/sub/'
[file] File size is 2334386176 bytes
STREAM: [file] input.mpg
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
Checking for YUV4MPEG2
ASF_check: not ASF guid!
Checking for NuppelVideo
Checking for REAL
Checking for SMJPEG
Searching demuxer type for filename input.mpg ext: .mpg
Checking for Nullsoft Streaming Video
Checking for MOV
Checking for VIVO
header block 1 size: 0
AVS: avs_check_file - attempting to open file input.mpg
AVS: File is too big, aborting...
Checking for PVA
Checking for MPEG-TS...
TRIED UP TO POSITION 70796, FOUND 47, packet_size= 0, SEEMS A TS? 0
Checking for LMLM4 Stream Format
Invalid packet in LMLM4 stream: ch=0 size=1140851704
LMLM4 Stream Format not found
system stream synced at 0xD (13)!
==> Found video stream: 0
ID_VIDEO_ID=0
==> Found audio stream: 0
ID_AUDIO_ID=0
MPEG Stream reached EOF
ds_fill_buffer: EOF reached (stream: video)
MPEG-PS file format detected.
Too many video packets in the buffer: (4096 in 7856228 bytes).
Maybe you are playing a non-interleaved stream/file or the codec failed?
For AVI files, try to force non-interleaved mode with the -ni option.
ds_fill_buffer: EOF reached (stream: audio)
MPEG: No audio stream found -> no sound.
Searching for sequence header... OK!
VIDEO: MPEG2 480x480 (aspect 2) 29.970 fps 6000.0 kbps (750.0 kbyte/s)
[V] filefmt:2 fourcc:0x10000002 size:480x480 fps:29.97 ftime:=0.0334
get_path('sub/') -> '/home/adamm/.mplayer/sub/'
ID_FILENAME=input.mpg
ID_DEMUXER=mpegps
ID_VIDEO_FORMAT=0x10000002
ID_VIDEO_BITRATE=6000000
ID_VIDEO_WIDTH=480
ID_VIDEO_HEIGHT=480
ID_VIDEO_FPS=29.970
ID_VIDEO_ASPECT=0.0000
ID_LENGTH=3598.19
md5sum: Parsing suboptions.
md5sum: outfile --> /dev/null
md5sum: Suboptions parsed OK.
==========================================================================
Opening video decoder: [mpegpes] MPEG 1/2 Video passthrough
VDec: vo config request - 480 x 480 (preferred colorspace: Mpeg PES)
Trying filter chain: vo
Could not find matching colorspace - retrying with -vf scale...
Opening video filter: [scale]
SwScale params: -1 x -1 (-1=no scaling)
Trying filter chain: scale vo
The selected video_out device is incompatible with this codec.
Try adding the scale filter, e.g. -vf spp,scale instead of -vf spp.
VDecoder init failed :(
Opening video decoder: [libmpeg2] MPEG 1/2 Video decoder libmpeg2-v0.4.0b
Selected video codec: [mpeg12] vfm: libmpeg2 (MPEG-1 or 2 (libmpeg2))
==========================================================================
ID_VIDEO_CODEC=mpeg12
Audio: no sound
Freeing 0 unused audio chunks.
Starting playback...
Uninit video: libmpeg2
vo: x11 uninit called but X11 not inited..
Exiting... (End of file)
Giacomo
>
> -------------------------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Encode2mpeg-users mailing list
> Enc...@li...
> https://lists.sourceforge.net/lists/listinfo/encode2mpeg-users
>
--
Adam Monsen
|
