[Emc-commit] [LinuxCNC/linuxcnc] e83540: Gmoccapy sim config: Fix HOME value causing limit ...

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

  Branch: refs/heads/master
  Home:   https://github.com/LinuxCNC/linuxcnc
  Commit: e83540464809db87d9dbfbae58cd54a8ffebb5a4
      https://github.com/LinuxCNC/linuxcnc/commit/e83540464809db87d9dbfbae58cd54a8ffebb5a4
  Author: david mueller <mue...@ho...>
  Date:   2026-03-19 (Thu, 19 Mar 2026)

  Changed paths:
    M configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini

  Log Message:
  -----------
  Gmoccapy sim config: Fix HOME value causing limit violation on homing

  Commit: a8605b7ad31110e255233b0b5b2daa86dcf2065c
      https://github.com/LinuxCNC/linuxcnc/commit/a8605b7ad31110e255233b0b5b2daa86dcf2065c
  Author: david mueller <mue...@ho...>
  Date:   2026-03-19 (Thu, 19 Mar 2026)

  Changed paths:
    A configs/sim/axis/home_is_shared/README
    A configs/sim/axis/home_is_shared/home_is_shared.ini
    A configs/sim/axis/home_is_shared/simulate_home_is_shared.halshow
    A configs/sim/axis/home_is_shared/simulated_home_is_shared.hal

  Log Message:
  -----------
  Add sim config for shared home switches

  Commit: 4975608ad963e787c853fa0d7686a9a711a9a85b
      https://github.com/LinuxCNC/linuxcnc/commit/4975608ad963e787c853fa0d7686a9a711a9a85b
  Author: david mueller <mue...@ho...>
  Date:   2026-03-19 (Thu, 19 Mar 2026)

  Changed paths:
    M configs/by_interface/parport/nist-lathe/inch.ini
    M configs/by_machine/scorbot-er-3/scorbot-er-3.ini
    M configs/sim/axis/axis.ini
    M configs/sim/axis/axis_mm.ini
    M configs/sim/axis/canterp.ini
    M configs/sim/axis/classicladder/demo_sim_cl.ini
    M configs/sim/axis/gantry/gantry.ini
    M configs/sim/axis/gantry/gantry_jjog.ini
    M configs/sim/axis/gladevcp/gladevcp_panel.ini
    M configs/sim/axis/gladevcp/gladevcp_panel_tester.ini
    M configs/sim/axis/gladevcp/gladevcp_tab.ini
    M configs/sim/axis/gladevcp/probe.ini
    M configs/sim/axis/gladevcp/set-param-from-ini.ini
    M configs/sim/axis/halui_pyvcp/halui.ini
    M configs/sim/axis/histogram_demo.ini
    M configs/sim/axis/historical_lathe.ini
    M configs/sim/axis/ini_hal_demo.ini
    M configs/sim/axis/ini_with_includes/joint_0.inc
    M configs/sim/axis/ini_with_includes/joint_2.inc
    M configs/sim/axis/ja_tests/xz/xzbase.inc
    M configs/sim/axis/lathe_multispindle/lathe.ini
    M configs/sim/axis/moveoff/moveoff_base.inc
    M configs/sim/axis/ngcgui/ngcgui.ini
    M configs/sim/axis/ngcgui/ngcgui_gcmc.ini
    M configs/sim/axis/ngcgui/ngcgui_lathe.ini
    M configs/sim/axis/ngcgui/ngcgui_simple.ini
    M configs/sim/axis/ngcgui/pyngcgui_axis.ini
    M configs/sim/axis/profile_axis.ini
    M configs/sim/axis/qtvcp/qtvcp_tab.ini
    M configs/sim/axis/qtvcp/qtvismach_tab.ini
    M configs/sim/axis/random_tc.ini
    M configs/sim/axis/remap/cycle/cycle.ini
    M configs/sim/axis/remap/extend-builtins/extend-builtins.ini
    M configs/sim/axis/remap/getting-started/demo.ini
    M configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini
    M configs/sim/axis/remap/rack-toolchange/racktoolchange.ini
    M configs/sim/axis/remap/stop-lookahead/demo.ini
    M configs/sim/axis/simtcl/twopass_base.inc
    M configs/sim/axis/spindle_orient/orient.ini
    M configs/sim/axis/twopass/twopass.ini
    M configs/sim/gmoccapy/gmoccapy.ini
    M configs/sim/gmoccapy/gmoccapy_4_axis.ini
    M configs/sim/gmoccapy/gmoccapy_800x600.ini
    M configs/sim/gmoccapy/gmoccapy_XYZAB.ini
    M configs/sim/gmoccapy/gmoccapy_XYZAC.ini
    M configs/sim/gmoccapy/gmoccapy_XYZCW.ini
    M configs/sim/gmoccapy/gmoccapy_blockdelete.ini
    M configs/sim/gmoccapy/gmoccapy_left_panel.ini
    M configs/sim/gmoccapy/gmoccapy_messages.ini
    M configs/sim/gmoccapy/gmoccapy_pedant.ini
    M configs/sim/gmoccapy/gmoccapy_pyngcgui.ini
    M configs/sim/gmoccapy/gmoccapy_pyngcgui_gcmc.ini
    M configs/sim/gmoccapy/gmoccapy_qt_messages.ini
    M configs/sim/gmoccapy/gmoccapy_right_panel.ini
    M configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini
    M configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini
    M configs/sim/gmoccapy/lathe_configs/lathe.ini
    M configs/sim/gmoccapy/lathe_configs/lathe_C.ini
    M configs/sim/gmoccapy/lathe_configs/lathe_CW.ini
    M configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini
    M configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini
    M configs/sim/gmoccapy/lathe_configs/lathe_macros.ini
    M configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini
    M configs/sim/gscreen/gscreen.ini
    M configs/sim/gscreen/gscreen_custom/9axis.ini
    M configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini
    M configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini
    M configs/sim/gscreen/gscreen_custom/industrial.ini
    M configs/sim/gscreen/gscreen_custom/tester.ini
    M configs/sim/gscreen/gscreen_custom/tester_metric.ini
    M configs/sim/gscreen/gscreen_mm.ini
    M configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini
    M configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini
    M configs/sim/gscreen/silverdragon/silverdragon.ini
    M configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini
    M configs/sim/pyvcp_demo/pyvcp_demo1.ini
    M configs/sim/pyvcp_demo/pyvcp_embed_tab.ini
    M configs/sim/qtaxis/gantry/qt_gantry.ini
    M configs/sim/qtaxis/xyz/qtaxis.ini
    M configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini
    M configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyzw.ini
    M configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini
    M configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini
    M configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_yyxz.ini
    M configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini
    M configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini
    M configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini
    M configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini
    M configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini
    M configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini
    M configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_vertical.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_vertical_xyza.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_next_xyz.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini
    M configs/sim/qttouchy/qttouchy.ini
    M configs/sim/qtvcp_screens/blender.ini
    M configs/sim/qtvcp_screens/qt_800x600.ini
    M configs/sim/qtvcp_screens/qt_gantry.ini
    M configs/sim/qtvcp_screens/qtaxis.ini
    M configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini
    M configs/sim/qtvcp_screens/qtaxis_mpg.ini
    M configs/sim/qtvcp_screens/qtdefault.ini
    M configs/sim/qtvcp_screens/qtdefault_gantry.ini
    M configs/sim/qtvcp_screens/qtdefault_mm.ini
    M configs/sim/qtvcp_screens/qtdragon/qtdragon_mpg.ini
    M configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini
    M configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini
    M configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini
    M configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini
    M configs/sim/qtvcp_screens/qtx1mill.ini
    M configs/sim/qtvcp_screens/tester.ini
    M configs/sim/tklinuxcnc/trivkins/xzbase.inc
    M configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini
    M configs/sim/woodpecker/woodpecker.ini
    M configs/sim/woodpecker/woodpecker_auto_tool_probe.ini
    M configs/sim/woodpecker/woodpecker_xyz.ini
    M configs/sim/woodpecker/woodpecker_xyza.ini
    M configs/sim/woodpecker/woodpecker_xyzab.ini
    M configs/sim/woodpecker/woodpecker_xyzy.ini
    M configs/sim/woodpecker/woodpecker_xyzya.ini
    M docs/src/source-highlight/ini-test.ini
    M lib/hallib/simulated_home.hal
    M tests/lathe/lathe.ini
    M tests/trajectory-planner/circular-arcs/configs/9axis.ini
    M tests/trajectory-planner/circular-arcs/configs/axis_mm.ini

  Log Message:
  -----------
  Don't use shared home switches in simulation configs

Using shared limit switches in sim configs creates error messages
when trying to rehome.

  Commit: d7d4219b73e5ff18281c0d52a5f6368ff00e3d08
      https://github.com/LinuxCNC/linuxcnc/commit/d7d4219b73e5ff18281c0d52a5f6368ff00e3d08
  Author: andypugh <an...@bo...>
  Date:   2026-04-04 (Sat, 04 Apr 2026)

  Changed paths:
    M configs/by_interface/parport/nist-lathe/inch.ini
    M configs/by_machine/scorbot-er-3/scorbot-er-3.ini
    M configs/sim/axis/axis.ini
    M configs/sim/axis/axis_mm.ini
    M configs/sim/axis/canterp.ini
    M configs/sim/axis/classicladder/demo_sim_cl.ini
    M configs/sim/axis/gantry/gantry.ini
    M configs/sim/axis/gantry/gantry_jjog.ini
    M configs/sim/axis/gladevcp/gladevcp_panel.ini
    M configs/sim/axis/gladevcp/gladevcp_panel_tester.ini
    M configs/sim/axis/gladevcp/gladevcp_tab.ini
    M configs/sim/axis/gladevcp/probe.ini
    M configs/sim/axis/gladevcp/set-param-from-ini.ini
    M configs/sim/axis/halui_pyvcp/halui.ini
    M configs/sim/axis/histogram_demo.ini
    M configs/sim/axis/historical_lathe.ini
    A configs/sim/axis/home_is_shared/README
    A configs/sim/axis/home_is_shared/home_is_shared.ini
    A configs/sim/axis/home_is_shared/simulate_home_is_shared.halshow
    A configs/sim/axis/home_is_shared/simulated_home_is_shared.hal
    M configs/sim/axis/ini_hal_demo.ini
    M configs/sim/axis/ini_with_includes/joint_0.inc
    M configs/sim/axis/ini_with_includes/joint_2.inc
    M configs/sim/axis/ja_tests/xz/xzbase.inc
    M configs/sim/axis/lathe_multispindle/lathe.ini
    M configs/sim/axis/moveoff/moveoff_base.inc
    M configs/sim/axis/ngcgui/ngcgui.ini
    M configs/sim/axis/ngcgui/ngcgui_gcmc.ini
    M configs/sim/axis/ngcgui/ngcgui_lathe.ini
    M configs/sim/axis/ngcgui/ngcgui_simple.ini
    M configs/sim/axis/ngcgui/pyngcgui_axis.ini
    M configs/sim/axis/profile_axis.ini
    M configs/sim/axis/qtvcp/qtvcp_tab.ini
    M configs/sim/axis/qtvcp/qtvismach_tab.ini
    M configs/sim/axis/random_tc.ini
    M configs/sim/axis/remap/cycle/cycle.ini
    M configs/sim/axis/remap/extend-builtins/extend-builtins.ini
    M configs/sim/axis/remap/getting-started/demo.ini
    M configs/sim/axis/remap/manual-toolchange-with-tool-length-switch/manualtoolchange.ini
    M configs/sim/axis/remap/rack-toolchange/racktoolchange.ini
    M configs/sim/axis/remap/stop-lookahead/demo.ini
    M configs/sim/axis/simtcl/twopass_base.inc
    M configs/sim/axis/spindle_orient/orient.ini
    M configs/sim/axis/twopass/twopass.ini
    M configs/sim/gmoccapy/gmoccapy.ini
    M configs/sim/gmoccapy/gmoccapy_4_axis.ini
    M configs/sim/gmoccapy/gmoccapy_800x600.ini
    M configs/sim/gmoccapy/gmoccapy_XYZAB.ini
    M configs/sim/gmoccapy/gmoccapy_XYZAC.ini
    M configs/sim/gmoccapy/gmoccapy_XYZCW.ini
    M configs/sim/gmoccapy/gmoccapy_blockdelete.ini
    M configs/sim/gmoccapy/gmoccapy_left_panel.ini
    M configs/sim/gmoccapy/gmoccapy_messages.ini
    M configs/sim/gmoccapy/gmoccapy_pedant.ini
    M configs/sim/gmoccapy/gmoccapy_pyngcgui.ini
    M configs/sim/gmoccapy/gmoccapy_pyngcgui_gcmc.ini
    M configs/sim/gmoccapy/gmoccapy_qt_messages.ini
    M configs/sim/gmoccapy/gmoccapy_right_panel.ini
    M configs/sim/gmoccapy/gmoccapy_sim_hardware_button.ini
    M configs/sim/gmoccapy/gmoccapy_with_user_tabs.ini
    M configs/sim/gmoccapy/lathe_configs/lathe.ini
    M configs/sim/gmoccapy/lathe_configs/lathe_C.ini
    M configs/sim/gmoccapy/lathe_configs/lathe_CW.ini
    M configs/sim/gmoccapy/lathe_configs/lathe_backtool.ini
    M configs/sim/gmoccapy/lathe_configs/lathe_imperial.ini
    M configs/sim/gmoccapy/lathe_configs/lathe_macros.ini
    M configs/sim/gmoccapy/plasma_config/gmoccapy_plasma.ini
    M configs/sim/gscreen/gscreen.ini
    M configs/sim/gscreen/gscreen_custom/9axis.ini
    M configs/sim/gscreen/gscreen_custom/gaxis_no_plot.ini
    M configs/sim/gscreen/gscreen_custom/gscreen_gaxis.ini
    M configs/sim/gscreen/gscreen_custom/industrial.ini
    M configs/sim/gscreen/gscreen_custom/tester.ini
    M configs/sim/gscreen/gscreen_custom/tester_metric.ini
    M configs/sim/gscreen/gscreen_mm.ini
    M configs/sim/gscreen/ngcgui/pyngcgui_gscreen.ini
    M configs/sim/gscreen/ngcgui/pyngcgui_gscreen_popupkeyboard.ini
    M configs/sim/gscreen/silverdragon/silverdragon.ini
    M configs/sim/pyvcp_demo/pyvcp_bottom_panel.ini
    M configs/sim/pyvcp_demo/pyvcp_demo1.ini
    M configs/sim/pyvcp_demo/pyvcp_embed_tab.ini
    M configs/sim/qtaxis/gantry/qt_gantry.ini
    M configs/sim/qtaxis/xyz/qtaxis.ini
    M configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyz.ini
    M configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyyzw.ini
    M configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzy.ini
    M configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_xyzya.ini
    M configs/sim/qtdragon/qtdragon_multi_joint/qtdragon_yyxz.ini
    M configs/sim/qtdragon/qtdragon_tool_probe/qtdragon_auto_tool_probe.ini
    M configs/sim/qtdragon/qtdragon_xyz/qtdragon_inch.ini
    M configs/sim/qtdragon/qtdragon_xyz/qtdragon_metric.ini
    M configs/sim/qtdragon/qtdragon_xyz/qtdragon_xyza.ini
    M configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyza.ini
    M configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzab.ini
    M configs/sim/qtdragon/qtdragon_xyz45/qtdragon_xyzac.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_vertical.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_vertical_xyza.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyz.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyza.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzab.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_hd_xyzac.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_xyz/qtdragon_next_xyz.ini
    M configs/sim/qtdragon_hd/qtdragon_hd_z_compensation/qtdragon_hd_z_compensation.ini
    M configs/sim/qttouchy/qttouchy.ini
    M configs/sim/qtvcp_screens/blender.ini
    M configs/sim/qtvcp_screens/qt_800x600.ini
    M configs/sim/qtvcp_screens/qt_gantry.ini
    M configs/sim/qtvcp_screens/qtaxis.ini
    M configs/sim/qtvcp_screens/qtaxis_lathe/qtaxis_lathe.ini
    M configs/sim/qtvcp_screens/qtaxis_mpg.ini
    M configs/sim/qtvcp_screens/qtdefault.ini
    M configs/sim/qtvcp_screens/qtdefault_gantry.ini
    M configs/sim/qtvcp_screens/qtdefault_mm.ini
    M configs/sim/qtvcp_screens/qtdragon/qtdragon_mpg.ini
    M configs/sim/qtvcp_screens/qtvcp_custom/qtdefault_ngc.ini
    M configs/sim/qtvcp_screens/qtvcp_experimental/gremlin.ini
    M configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_gladevcp.ini
    M configs/sim/qtvcp_screens/qtvcp_experimental/qtdefault_ngc.ini
    M configs/sim/qtvcp_screens/qtx1mill.ini
    M configs/sim/qtvcp_screens/tester.ini
    M configs/sim/tklinuxcnc/trivkins/xzbase.inc
    M configs/sim/touchy/ngcgui/pyngcgui_touchy_lathe.ini
    M configs/sim/woodpecker/woodpecker.ini
    M configs/sim/woodpecker/woodpecker_auto_tool_probe.ini
    M configs/sim/woodpecker/woodpecker_xyz.ini
    M configs/sim/woodpecker/woodpecker_xyza.ini
    M configs/sim/woodpecker/woodpecker_xyzab.ini
    M configs/sim/woodpecker/woodpecker_xyzy.ini
    M configs/sim/woodpecker/woodpecker_xyzya.ini
    M docs/src/source-highlight/ini-test.ini
    M lib/hallib/simulated_home.hal
    M tests/lathe/lathe.ini
    M tests/trajectory-planner/circular-arcs/configs/9axis.ini
    M tests/trajectory-planner/circular-arcs/configs/axis_mm.ini

  Log Message:
  -----------
  Merge pull request #3869 from Sigma1912/use_home_not_shared

Remove use of HOME_IS_SHARED in sim configs

Compare: https://github.com/LinuxCNC/linuxcnc/compare/d2c5120deee0...d7d4219b73e5

To unsubscribe from these emails, change your notification settings at https://github.com/LinuxCNC/linuxcnc/settings/notifications