From: Dewey G. <gi...@gi...> - 2011-12-31 11:39:30
|
ngcgui preamble files: change tol from global to local Use of named global parameters as inputs to ngcgui is deprecated. While this change affects only preamble files, the intent is to eliminate named global parameters in ngcgui examples except where it conforms to the documented good practices http://git.linuxcnc.org/?p=emc2.git;a=commitdiff;h=05b7739 --- nc_files/ngcgui_lib/lathe/lathe_std.ngc | 4 ++-- nc_files/ngcgui_lib/utilitysubs/in_std.ngc | 4 ++-- nc_files/ngcgui_lib/utilitysubs/mm_std.ngc | 5 ++--- 3 files changed, 6 insertions(+), 7 deletions(-) diff --git a/nc_files/ngcgui_lib/lathe/lathe_std.ngc b/nc_files/ngcgui_lib/lathe/lathe_std.ngc index 930df0d..ecb3e64 100644 --- a/nc_files/ngcgui_lib/lathe/lathe_std.ngc +++ b/nc_files/ngcgui_lib/lathe/lathe_std.ngc @@ -8,5 +8,5 @@ g90 (absolute distance mode) g94 (units/min feedrate) g54 (Coordinate system 1 default) -#<_tol> = 0.001 -g64 p#<_tol> (path control stop) +#<tol> = 0.001 +g64 p#<tol> (path control stop) diff --git a/nc_files/ngcgui_lib/utilitysubs/in_std.ngc b/nc_files/ngcgui_lib/utilitysubs/in_std.ngc index d9698b4..87555af 100644 --- a/nc_files/ngcgui_lib/utilitysubs/in_std.ngc +++ b/nc_files/ngcgui_lib/utilitysubs/in_std.ngc @@ -8,5 +8,5 @@ g90 (absolute distance mode) g94 (units/min feedrate) g54 (Coordinate system 1 default) -#<_tol> = 0.001 -g64 p#<_tol> (path control stop) +#<tol> = 0.001 +g64 p#<tol> (path control stop) diff --git a/nc_files/ngcgui_lib/utilitysubs/mm_std.ngc b/nc_files/ngcgui_lib/utilitysubs/mm_std.ngc index 2d6ba8f..f15d793 100644 --- a/nc_files/ngcgui_lib/utilitysubs/mm_std.ngc +++ b/nc_files/ngcgui_lib/utilitysubs/mm_std.ngc @@ -7,6 +7,5 @@ g90 (absolute distance mode) g94 (units/min feedrate) g54 (Coordinate system 1 default) -#<_tol> = 0.001 - -g64 p#<_tol> (path control stop) +#<tol> = 0.001 +g64 p#<tol> (path control stop) |