RE: [Embedlets-dev] Enclosure for TStik

[Kelly S. <be...@ea...>]

Bruce - Keep in mind that the JSIMM form factor is about an inch to tall, to
plug into the Systronix TiltPro socket, that fits inside the box (a
bummer!).  Also, the same problem with the Systronix JStik and 6-socket
"daughter" board.

Hey!  My divorce finalized on November 13th... and get this; she's paying ME
alimony at the tune of $1,585.00 per month.  Time to buy more "JToys" from
you soon!

Best regards, Kelly Smith
  -----Original Message-----
  From: emb...@li...
[mailto:emb...@li...]On Behalf Of Bruce
Boyes
  Sent: Monday, November 17, 2003 10:44 PM
  To: Embedlets
  Subject: Re: [Embedlets-dev] Enclosure for TStik


  At 04:47 PM 11/16/2003 -0500, Marc Nicholas wrote:

    I designed a 100mm*100mm Euroboard enclosure. Its extruded aluminum (its
a customized version of a Hammond case). The end plates have punched-out
holes to fit a Tilt-400 or Tilt-400 Pro. Oh, and its clear anodized.

    Ive been on the fence regarding actually doing the first production
run...I certainly dont currently need as many units as Id need to produce to
make it viable. If there are others that could use a case like this, contact
me off-list and well talk.

    Cost would be in the range of US$20/unit.

    -marc

  Hi Marc, I forgot about this. It might be just what is needed. I'd like to
order a couple when you have some.

  Bruce