Menu
▾
▴
SF.net SVN: edk2-buildtools:[2586] trunk/BaseTools/Source/Python/build/ build.py
|
From: <lh...@us...> - 2013-07-03 14:50:00
|
Revision: 2586
http://sourceforge.net/p/edk2-buildtools/code/2586
Author: lhauch
Date: 2013-07-03 14:49:57 +0000 (Wed, 03 Jul 2013)
Log Message:
-----------
Updated multi-threaded build to wait until all auto generated files have been created before starting the build tasks. This change was required to remove a race condition when building on newer, faster workstations.
Signed-off-by: Larry Hauch <lar...@in...>
Reviewed-by: Liu Yingke <yin...@in...>
Modified Paths:
--------------
trunk/BaseTools/Source/Python/build/build.py
Modified: trunk/BaseTools/Source/Python/build/build.py
===================================================================
--- trunk/BaseTools/Source/Python/build/build.py 2013-06-20 01:46:19 UTC (rev 2585)
+++ trunk/BaseTools/Source/Python/build/build.py 2013-07-03 14:49:57 UTC (rev 2586)
@@ -1,7 +1,7 @@
## @file
# build a platform or a module
#
-# Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>
+# Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.<BR>
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -23,7 +23,7 @@
import time
import platform
import traceback
-import encodings.ascii
+import encodings.ascii
from struct import *
from threading import *
@@ -47,9 +47,9 @@
import Common.GlobalData as GlobalData
# Version and Copyright
-VersionNumber = "0.5" + ' ' + gBUILD_VERSION
+VersionNumber = "0.51" + ' ' + gBUILD_VERSION
__version__ = "%prog Version " + VersionNumber
-__copyright__ = "Copyright (c) 2007 - 2010, Intel Corporation All rights reserved."
+__copyright__ = "Copyright (c) 2007 - 2013, Intel Corporation All rights reserved."
## standard targets of build command
gSupportedTarget = ['all', 'genc', 'genmake', 'modules', 'libraries', 'fds', 'clean', 'cleanall', 'cleanlib', 'run']
@@ -119,12 +119,12 @@
EfiSourceDir = os.path.normcase(os.path.normpath(os.environ["EFI_SOURCE"]))
EdkSourceDir = os.path.normcase(os.path.normpath(os.environ["EDK_SOURCE"]))
EcpSourceDir = os.path.normcase(os.path.normpath(os.environ["ECP_SOURCE"]))
-
+
os.environ["EFI_SOURCE"] = EfiSourceDir
os.environ["EDK_SOURCE"] = EdkSourceDir
os.environ["ECP_SOURCE"] = EcpSourceDir
os.environ["EDK_TOOLS_PATH"] = os.path.normcase(os.environ["EDK_TOOLS_PATH"])
-
+
if not os.path.exists(EcpSourceDir):
EdkLogger.verbose("ECP_SOURCE = %s doesn't exist. Edk modules could not be built." % EcpSourceDir)
elif ' ' in EcpSourceDir:
@@ -313,7 +313,7 @@
if not BuildCommand:
EdkLogger.error("build", OPTION_MISSING,
"No build command found for this module. "
- "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
+ "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
(Obj.BuildTarget, Obj.ToolChain, Obj.Arch),
ExtraData=str(Obj))
@@ -669,7 +669,7 @@
#
# Constructor will load all required image information.
#
- # @param BaseName The full file path of image.
+ # @param BaseName The full file path of image.
# @param Guid The GUID for image.
# @param Arch Arch of this image.
# @param OutputDir The output directory for image.
@@ -838,7 +838,7 @@
#
def InitBuild(self):
# parse target.txt, tools_def.txt, and platform file
- self.LoadConfiguration()
+ self.LoadConfiguration()
# Allow case-insensitive for those from command line or configuration file
ErrorCode, ErrorInfo = self.PlatformFile.Validate(".dsc", False)
@@ -897,7 +897,7 @@
if BuildCommand == None or len(BuildCommand) == 0:
EdkLogger.error("build", OPTION_MISSING,
"No build command found for this module. "
- "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
+ "Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %
(AutoGenObject.BuildTarget, AutoGenObject.ToolChain, AutoGenObject.Arch),
ExtraData=str(AutoGenObject))
@@ -994,9 +994,9 @@
elif SectionHeader[0] in ['.data', '.sdata']:
DataSectionAddress = SectionHeader[1]
if AddrIsOffset:
- MapBuffer.write('(GUID=%s, .textbaseaddress=-0x%010X, .databaseaddress=-0x%010X)\n' % (ModuleInfo.Guid, 0 - (BaseAddress + TextSectionAddress), 0 - (BaseAddress + DataSectionAddress)))
+ MapBuffer.write('(GUID=%s, .textbaseaddress=-0x%010X, .databaseaddress=-0x%010X)\n' % (ModuleInfo.Guid, 0 - (BaseAddress + TextSectionAddress), 0 - (BaseAddress + DataSectionAddress)))
else:
- MapBuffer.write('(GUID=%s, .textbaseaddress=0x%010X, .databaseaddress=0x%010X)\n' % (ModuleInfo.Guid, BaseAddress + TextSectionAddress, BaseAddress + DataSectionAddress))
+ MapBuffer.write('(GUID=%s, .textbaseaddress=0x%010X, .databaseaddress=0x%010X)\n' % (ModuleInfo.Guid, BaseAddress + TextSectionAddress, BaseAddress + DataSectionAddress))
#
# Add debug image full path.
#
@@ -1076,7 +1076,7 @@
for ModuleGuid in ModuleList:
Module = ModuleList[ModuleGuid]
GlobalData.gProcessingFile = "%s [%s, %s, %s]" % (Module.MetaFile, Module.Arch, Module.ToolChain, Module.BuildTarget)
-
+
OutputImageFile = ''
for ResultFile in Module.CodaTargetList:
if str(ResultFile.Target).endswith('.efi'):
@@ -1127,15 +1127,15 @@
if Pcd.Type == TAB_PCDS_PATCHABLE_IN_MODULE and Pcd.TokenCName in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST:
ModuleIsPatch = True
break
-
+
if not ModuleIsPatch:
continue
#
# Module includes the patchable load fix address PCDs.
- # It will be fixed up later.
+ # It will be fixed up later.
#
PatchEfiImageList.append (OutputImageFile)
-
+
#
# Get Top Memory address
#
@@ -1155,14 +1155,14 @@
#
# Patch FixAddress related PCDs into EFI image
#
- for EfiImage in PatchEfiImageList:
+ for EfiImage in PatchEfiImageList:
EfiImageMap = EfiImage.replace('.efi', '.map')
if not os.path.exists(EfiImageMap):
continue
#
# Get PCD offset in EFI image by GenPatchPcdTable function
#
- PcdTable = parsePcdInfoFromMapFile(EfiImageMap, EfiImage)
+ PcdTable = parsePcdInfoFromMapFile(EfiImageMap, EfiImage)
#
# Patch real PCD value by PatchPcdValue tool
#
@@ -1178,16 +1178,16 @@
ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE, str (SmmSize/0x1000))
if ReturnValue != 0:
EdkLogger.error("build", PARAMETER_INVALID, "Patch PCD value failed", ExtraData=ErrorInfo)
-
+
MapBuffer.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize/0x1000))
MapBuffer.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize/0x1000))
MapBuffer.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize/0x1000))
if len (SmmModuleList) > 0:
MapBuffer.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize/0x1000))
-
- PeiBaseAddr = TopMemoryAddress - RtSize - BtSize
+
+ PeiBaseAddr = TopMemoryAddress - RtSize - BtSize
BtBaseAddr = TopMemoryAddress - RtSize
- RtBaseAddr = TopMemoryAddress - ReservedRuntimeMemorySize
+ RtBaseAddr = TopMemoryAddress - ReservedRuntimeMemorySize
self._RebaseModule (MapBuffer, PeiBaseAddr, PeiModuleList, TopMemoryAddress == 0)
self._RebaseModule (MapBuffer, BtBaseAddr, BtModuleList, TopMemoryAddress == 0)
@@ -1196,7 +1196,7 @@
MapBuffer.write('\n\n')
sys.stdout.write ("\n")
sys.stdout.flush()
-
+
## Save platform Map file
#
def _SaveMapFile (self, MapBuffer, Wa):
@@ -1243,7 +1243,7 @@
self.BuildReport.AddPlatformReport(Wa)
self.Progress.Stop("done!")
self._Build(self.Target, Wa)
-
+
# Create MAP file when Load Fix Address is enabled.
if self.Target in ["", "all", "fds"]:
for Arch in Wa.ArchList:
@@ -1292,7 +1292,7 @@
GlobalData.gGlobalDefines['TARGET'] = BuildTarget
for ToolChain in self.ToolChainList:
GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain
- GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain
+ GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain
#
# module build needs platform build information, so get platform
# AutoGen first
@@ -1383,7 +1383,7 @@
GlobalData.gGlobalDefines['TARGET'] = BuildTarget
for ToolChain in self.ToolChainList:
GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain
- GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain
+ GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain
Wa = WorkspaceAutoGen(
self.WorkspaceDir,
self.PlatformFile,
@@ -1414,6 +1414,7 @@
Pa = PlatformAutoGen(Wa, self.PlatformFile, BuildTarget, ToolChain, Arch)
if Pa == None:
continue
+ pModules = []
for Module in Pa.Platform.Modules:
# Get ModuleAutoGen object to generate C code file and makefile
Ma = ModuleAutoGen(Wa, Module, BuildTarget, ToolChain, Arch, self.PlatformFile)
@@ -1433,6 +1434,9 @@
if self.Target == "genmake":
continue
self.Progress.Stop("done!")
+ pModules.append(Ma)
+
+ for Ma in pModules:
# Generate build task for the module
Bt = BuildTask.New(ModuleMakeUnit(Ma, self.Target))
# Break build if any build thread has error
@@ -1537,10 +1541,10 @@
if not os.path.exists(FvDir):
continue
- for Arch in self.ArchList:
+ for Arch in self.ArchList:
# Build up the list of supported architectures for this build
prefix = '%s_%s_%s_' % (BuildTarget, ToolChain, Arch)
-
+
# Look through the tool definitions for GUIDed tools
guidAttribs = []
for (attrib, value) in self.ToolDef.ToolsDefTxtDictionary.iteritems():
@@ -1555,7 +1559,7 @@
path = self.ToolDef.ToolsDefTxtDictionary[path]
path = self.GetFullPathOfTool(path)
guidAttribs.append((guid, toolName, path))
-
+
# Write out GuidedSecTools.txt
toolsFile = os.path.join(FvDir, 'GuidedSectionTools.txt')
toolsFile = open(toolsFile, 'wt')
@@ -1632,7 +1636,7 @@
EdkLogger.error('build', FORMAT_INVALID,
"The macro name must be in the pattern [A-Z][A-Z0-9_]*",
ExtraData=DefineTokenList[0])
-
+
if len(DefineTokenList) == 1:
DefineDict[DefineTokenList[0]] = "TRUE"
else:
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
