I installed your program and it's working very fine. I use KiCad for multilayer PCBs, normally 4-6 layers. I used freecad-PCB to load the kicad_pcb-File in freecad, but i got only the top and bottom layers. The In1, In2...layers are not displayed on the "PCB settings" window.
It is possible to load a multilayer PCB from KiCad in freeCad via FreeCad-PCB? Or is some thing wrong?
May be you can implement solch a function? Or it is very difficultly?
Actually I use Kicad 4.0.6 and freecad 0.14
Thank you and regards
Rafa
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
Anonymous
-
2019-02-08
Post awaiting moderation.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
Anonymous
-
2019-02-15
Post awaiting moderation.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
Anonymous
-
2019-07-09
Post awaiting moderation.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
Anonymous
-
2019-07-13
Post awaiting moderation.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
Anonymous
-
2019-08-01
Post awaiting moderation.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
Anonymous
-
2019-08-05
Post awaiting moderation.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
Anonymous
-
2019-08-24
Post awaiting moderation.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
View and moderate all "Help" comments posted by this user
Mark all as spam, and block user from posting to "Forum"
Hello,
I installed your program and it's working very fine. I use KiCad for multilayer PCBs, normally 4-6 layers. I used freecad-PCB to load the kicad_pcb-File in freecad, but i got only the top and bottom layers. The In1, In2...layers are not displayed on the "PCB settings" window.
It is possible to load a multilayer PCB from KiCad in freeCad via FreeCad-PCB? Or is some thing wrong?
May be you can implement solch a function? Or it is very difficultly?
Actually I use Kicad 4.0.6 and freecad 0.14
Thank you and regards
Rafa
Hello,
at the moment script does not supports multilayers. In the future - why not.
Last edit: Mariusz 2017-06-12