Hi, PCB thikness is stuck at 0.5mm minimum, even if, for example, 0.2mm (flex PCB) is entered in PCB Settings windows when opening file. Regards, Seb.
Anonymous
You seem to have CSS turned off. Please don't fill out this field.
Hi, changed, now range is from 0.2 to 10mm. check version from github https://github.com/marmni/FreeCAD-PCB
Ok, works as expected with 0.2mm. Thanks for the job. Best Regards.
Hi,
PCB thikness is stuck at 0.5mm minimum, even if, for example, 0.2mm (flex PCB) is entered in PCB Settings windows when opening file.
Regards,
Seb.
Hi,
changed, now range is from 0.2 to 10mm. check version from github https://github.com/marmni/FreeCAD-PCB
Ok, works as expected with 0.2mm.
Thanks for the job.
Best Regards.