#37 Not all holes are exported to gEDA PCB file

[Jiří Čejka]

Hi,

this bug is related to export feature of FreeCAD-PCB to gEDA. I used simmilar
FreeCAD design as in bug report #36. The difference is only additional hole
with some random position and radius placed on the PCB. Hole was included in
hole sketch of course.

If I do the export to gEDA, that additional hole is not exported as you can
see on attached gEDA exported PCB screenshot. I also included screenshots from
FreeCAD and related .fcstd and .pcb files.

[Mariusz]

Hello,
I don't have this kind of error.

[Jiří Čejka]

Hi,

I've tried to simulate the problem so I went thru step by step and have added
one hole by another. When I've created first hole I also created the PCB. Second
and all other holes I've added to the existing hole sketch. Every after I've added
new hole I've exported such board to gEDA.

Problem appears after addition of fifth hole as can be seen at attached files.
Firstly fifth hole was added without proper constrains like position and size
(filename: random-hole-position-export-5.fcstd). Exported PCB does not contain
that hole so I've tried to add proper constrains (filename: random-hole-position-export-6.fcstd)
and have exported that board again. Neither that PCB file contain that hole.

I cannot figure why it happened but it did.

[Mariusz]

Hi,
sorry but I could not reproduce that issue. I am able correctly export pcb file from all attachments.

[Jiří Čejka]

I'll keep diging what exactly causing this problem.