RE: [Dynapi-Dev] DynAPI.include()

[Pascal B. <pa...@dy...>]

when you remove that line, and include files with a .js

the join later on causes the files to be named   dynapi/api/layer/js.js


Pascal Bestebroer
pa...@dy...
http://www.dynamic-core.net

  -----Oorspronkelijk bericht-----
  Van: dyn...@li...
[mailto:dyn...@li...]Namens Michael Pemberton
  Verzonden: zaterdag 6 januari 2001 1:46
  Aan: dyn...@li...
  Onderwerp: Re: [Dynapi-Dev] DynAPI.include()


  Those changes are not needed.  If a non library file is entered, there is
no problem.  It just gets split and then rejoined later.
       srcArray = src.split('.');
  -->  if (srcArray[srcArray.length-1] == 'js') array.length -= 1;
       if (!path) var path=DynAPI.librarypath;

  Adding this additional line allows for removal of the '.js' extension if
it has been included.

  Also, there is no point in testing for an array length of > 3.  This
allows for any of the following to work:

  DynAPI.include('afroapi.ext.keyevents','../../js')
  DynAPI.include('afroapi/ext/keyevents','../../js')
  DynAPI.include('js/afroapi/ext/keyevents','../../')
  DynAPI.include('js.afroapi.ext.keyevents','../../')

  This allows for further breaking down your directories to make them easier
to understand.


  Pascal Bestebroer wrote:

     minor modification: include : function(src,path)

        srcArray=src.split('.')
        if (srcArray.length>3) srcArray.length-=1
        if (!path)

         var path=DynAPI.librarypath
         var pckg=srcArray[0]
         var grp=srcArray[1]
         var file=srcArray[2]
         if (file=='*')

            if (DynAPI.packages[pckg]) group=DynAPI.packages[pckg].libs[grp]
            if (group) for (var i in group) document.write('<script
language="Javascript1.2"
src="'+path+pckg+'/'+grp+'/'+group[i]+'.js"><\/script>')
            else alert('include()\n\nThe following package could not be
loaded:\n'+src+'\n\nmake sure you specified the correct path.')
         } else

             if (path[path.length-1] != "/") path += "/"
             document.write('<script language="Javascript1.2"
src="'+path+srcArray.join('/')+'.js"><\/script>')
         }
        } else

       document.write('<script language="Javascript1.2"
src="'+path+'/'+src+'"><\/script>')
        }
     }  makes sure that other files (not in packages, etc) can also be
correctly.included when specifying a path..  Also when a .js extension IS
supplied this code will take care of it.Other point is that the
DynAPI.addLibrary()  calls should NOT specify a the js  extension to make it
work correctly.cya, Pascal Bestebroer
    pa...@dy...
    http://www.dynamic-core.net
      -----Oorspronkelijk bericht-----
      Van: dyn...@li...
[mailto:dyn...@li...]Namens Michael Pemberton
      Verzonden: vrijdag 5 januari 2001 15:26
      Aan: dyn...@li...
      Onderwerp: Re: [Dynapi-Dev] DynAPI.include()

      I was looking at a way of making the DynAPI.include method more
simple.  Here's what I came up with:
      include : function(src,path)

        srcArray = src.split('.');
        if (!path) var path=DynAPI.librarypath;
        var pckg=srcArray[0];
        var grp=srcArray[1];
        var file=srcArray[2];
        if (file=='*')

          if (DynAPI.packages[pckg]) group=DynAPI.packages[pckg][grp];
          if (group) for (var i in group) document.write('<script
language="Javascript1.2"
src="'+path+pckg+'/'+grp+'/'+group[i]+'.js"><\/script>');
          else alert('include()\n\nThe following package could not be
loaded:\n'+src+'\n\nmake sure you specified the correct path.');
        } else

           if (path[path.length-1] != "/") path += "/";
           document.write('<script language="Javascript1.2"
src="'+path+srcArray.join('/')+'.js"><\/script>');
        };
      }

      This way, there is no more searching for '.' over and over again.
      Also, you can now refer to individual files (even you own external
files) using '.' instead of '/'.  This way, it fits the library syntax.
Hope this is of some use.

      Robert Rainwater wrote:

        I've updated my current version to do this for a while, but just
haven't put
        it in CVS.  I will update CVS soon so that the include will work
that way.
        Robert
        ----- Original Message -----
        From: "Michael Bürge" <mb...@st...>
        To: <dyn...@li...>
        Sent: Tuesday, January 02, 2001 6:58 PM
        Subject: [Dynapi-Dev] DynAPI.include()

        > hi there.
        >
        > this is my first post to this list, and i would like to use the
        opportunity to thank you for the great work you're all doing. i just
started
        dealing with
        > the dynapi after having spent a _lot_ of time putting together
something
        similar on my own (i now finally gave up, mainly because it's just
way too
        much
        > work keeping everything up to date).
        >
        > now to the real issue of this post:
        >
        > the following is an excerpt from part 1 one of the tutorials
written by
        Pascal, describing the include() function:
        >
        > * DynAPI.include('myownfile.js','location/path')
        > Include your own file not located in the [dynapi base path]
location
        > * DynAPI.include('myownfile.js','./')
        > Include your own file located at the current file location.
        >
        > i like these features, so i tried to use them bu it didn't work.
looking
        at the code i realised that they weren't implemented at all. i don't
know if
        > somebody did already implement them, but both the current distro
and the
        current CVS-version do not contain them.
        > so here's my version:
        >
        >  include : function(src,path)

        >   if(src.substring(src.length-3)!=".js") src+=".js";
        >   if (!path) var path=DynAPI.librarypath;
        >   else

        >       if (path=="./") path = "";
        >       else if (path[path.length-1] != "/") path += "/";
        >       document.write('<script language="Javascript1.2" src="'+
path + src
        + '"></script>');
        >       return;
        >   }
        >     ....some more stuff....
        >  }
        >
        > hope this is usefull, and sorry if i missed the version containing
those
        features. (BTW: is was pretty hard for me to find out where to get
the
        current
        > files, so a few hints on the project-webpage would save a great
deal of
        time to people interested in looking at the current work going on)
        >
        > that all for now.
        > greets.
        > michael buerge
        >
        >
        > _______________________________________________
        > Dynapi-Dev mailing list
        > Dyn...@li...
        > http://lists.sourceforge.net/mailman/listinfo/dynapi-dev

        _______________________________________________
        Dynapi-Dev mailing list
        Dyn...@li...
        http://lists.sourceforge.net/mailman/listinfo/dynapi-dev

      _______________________________________________ Dynapi-Dev mailing
list Dyn...@li...
http://lists.sourceforge.net/mailman/listinfo/dynapi-dev
  _______________________________________________ Dynapi-Dev mailing list
Dyn...@li...
http://lists.sourceforge.net/mailman/listinfo/dynapi-dev