Re: [Dynapi-Dev] anchors:

[Doug M. <do...@cr...>]

And for my next trick..

:-)


----- Original Message ----- 
From: "Doug Melvin" <do...@cr...>
To: <dyn...@li...>
Sent: Tuesday, April 01, 2003 1:06 AM
Subject: Re: [Dynapi-Dev] anchors:


> Beauty!!!
> 
> Check out the attached example boys and girls(?)
> 
> ----- Original Message ----- 
> From: "Raymond Irving" <xw...@ya...>
> To: <dyn...@li...>
> Sent: Sunday, March 30, 2003 9:20 AM
> Subject: Re: [Dynapi-Dev] anchors:
> 
> 
> > 
> > I've uploaded the fix to the cvs. Please checkout the
> > files to see if it's working ok. Thanks again for the
> > example.
> > 
> > --
> > Raymond Irving
> > 
> > --- Doug Melvin <do...@cr...> wrote:
> > > In creating the attached example I discovered the
> > > following:
> > > The width of the button is being changed, but the
> > > anchor parameters are not
> > > being utilized after the size change.
> > > 
> > > When you click the link to change to width to 1
> > > pixel you will notice that
> > > the button is set to a width of 1, but the button's
> > > left position is not
> > > changed..
> > > Meaning, that the parameter of right:0 is no longer
> > > honored
> > > 
> > > You can see the same when you set the height of the
> > > layer, the layer's x
> > > potion doe snot change,
> > > therfore not honering the bottom:0 parameter.
> > > 
> > > As the only parameters passed to setAnchor (in this
> > > case) are
> > > right:0,bottom:0
> > > one would dexpect that after changing the size, that
> > > the layer would be
> > > re-anchored to
> > > right:0,bottom:0
> > > 
> > > On other words, the anchors work great, until you
> > > change the size of the
> > > layer,
> > > at which point the anchors are no longer honored..
> > > 
> > > ----- Original Message -----
> > > From: "Raymond Irving" <xw...@ya...>
> > > To: "Doug Melvin" <do...@cr...>;
> > > <dyn...@li...>
> > > Sent: Friday, March 28, 2003 7:13 AM
> > > Subject: Re: [Dynapi-Dev] anchors:
> > > 
> > > 
> > > >
> > > > --- Doug Melvin <do...@cr...>
> > > wrote:
> > > > > a point.. it seems that you must define the size
> > > of
> > > > > a layer before you set it's anchor,
> > > > > unless you intend to set all 4 dimension in the
> > > > > anchor.. can this be fixed somehow?
> > > >
> > > > Please send me a working example of the above and
> > > I'll
> > > > take a look at it.
> > > >
> > > > > And once the anchor is set, even if you did not
> > > > > define it left (for instance) you can not resize
> > > > > thelayer..
> > > > >
> > > > > It would be nice I I could anchor a layer to the
> > > > > top+right of it's parent, but still be able to
> > > > > change it's width or hight
> > > > > afterwards.
> > > >
> > > > That should be possible with
> > > > setAnchor({top:0,right:0}). You should then be
> > > able to
> > > > change the width and height without any problem at
> > > > all. If you can't change the width/height after
> > > > setting the anchor then send me a working example
> > > so I
> > > > can take a look at it
> > > >
> > > > --
> > > > Raymond Irving
> > > >
> > > > __________________________________________________
> > > > Do you Yahoo!?
> > > > Yahoo! Platinum - Watch CBS' NCAA March Madness,
> > > live on your desktop!
> > > > http://platinum.yahoo.com
> > > >
> > > >
> > > >
> > >
> > -------------------------------------------------------
> > > > This SF.net email is sponsored by:
> > > > The Definitive IT and Networking Event. Be There!
> > > > NetWorld+Interop Las Vegas 2003 -- Register today!
> > > >
> > >
> > http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> > > > _______________________________________________
> > > > Dynapi-Dev mailing list
> > > > Dyn...@li...
> > > >
> > >
> > http://www.mail-archive.com/dyn...@li.../
> > > >
> > > 
> > 
> > > ATTACHMENT part 2 application/x-compressed
> > name=anchor-issue.zip
> > 
> > 
> > 
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
> > http://platinum.yahoo.com
> > 
> > 
> > -------------------------------------------------------
> > This SF.net email is sponsored by:
> > The Definitive IT and Networking Event. Be There!
> > NetWorld+Interop Las Vegas 2003 -- Register today!
> > http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> > _______________________________________________
> > Dynapi-Dev mailing list
> > Dyn...@li...
> > http://www.mail-archive.com/dyn...@li.../
> > 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: ValueWeb: 
> Dedicated Hosting for just $79/mo with 500 GB of bandwidth! 
> No other company gives more support or power for your dedicated server
> http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
> _______________________________________________
> Dynapi-Dev mailing list
> Dyn...@li...
> http://www.mail-archive.com/dyn...@li.../
>