dynapi-help

Re: [Dynapi-Help] offtopic? IE "clear cover layer"

[Daniel T. <de...@ti...>]

Yes this works very well, and it seams like you will be needing this for ordinary layers if you are using mac ie 5 aswell... So we need to start to learn this tecnique :)

/Daniel

> Perfect, works like a charm.  Thanks Arijit.
> 
> Arijit Das wrote:
> 
> > IE doesn't consider a layer to 'be there' unless there's content on 
> > it, as far as I have seen.  A simple work-around would be to place a 
> > clear, 1 pixel by 1 pixel image, in the cover layer and stretch it to 
> > the layers width and height.
> >
> > Hope that helps...
> >
> > Arijit
> >
> >
> > Jesse Vitrone wrote:
> >
> >> I'm not sure if this is really on topic, but you guys know the most 
> >> about this stuff, so I thought you might be able to help out.
> >>
> >> I have layer A, which has an iframe on it.  I don't want people to be 
> >> able to click on the website in the iframe at certain times, so I 
> >> need to make a clear cover layer over it.  To do this, I added layer 
> >> B as a child of A, and it covers it completely.
> >>
> >> In Mozilla - works great, you can see the page in the iframe, but 
> >> nothing is clickable.
> >>
> >> Here's the problem:
> >> In IE - if I make the cover layer a color, then I only see the color, 
> >> and I can't click anything that it's covering, even when I click 
> >> where a link would normally be on the page below, so far so good.  
> >> But when I change the color of the cover layer to "transparent", then 
> >> it's like it's not there.  I can click right through it to the page 
> >> below.
> >>
> >> Any ideas how to make a clear cover layer in IE?  Or is there someway 
> >> to make an iframe "view only" ?
> >>
> >> Thanks in advance for the suggestions,
> >>    Jesse
> >>
> >>
> >> -------------------------------------------------------
> >> This SF.net email is sponsored by: SF.net Giveback Program.
> >> Does SourceForge.net help you be more productive?  Does it
> >> help you create better code?  SHARE THE LOVE, and help us help
> >> YOU!  Click Here: http://sourceforge.net/donate/
> >> _______________________________________________
> >> Dynapi-Help mailing list
> >> Dyn...@li...
> >> https://lists.sourceforge.net/lists/listinfo/dynapi-help
> >>
> >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: SF.net Giveback Program.
> > Does SourceForge.net help you be more productive?  Does it
> > help you create better code?  SHARE THE LOVE, and help us help
> > YOU!  Click Here: http://sourceforge.net/donate/
> > _______________________________________________
> > Dynapi-Help mailing list
> > Dyn...@li...
> > https://lists.sourceforge.net/lists/listinfo/dynapi-help
> 
> 
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive?  Does it
> help you create better code?  SHARE THE LOVE, and help us help
> YOU!  Click Here: http://sourceforge.net/donate/
> _______________________________________________
> Dynapi-Help mailing list
> Dyn...@li...
> https://lists.sourceforge.net/lists/listinfo/dynapi-help

Re: [Dynapi-Help] offtopic? IE "clear cover layer"

[Daniel T. <de...@ti...>]

Well in IE 5 for mac the problem is vice versa, if you have a text that lays on a layer, and the layer is "linked" the text will block the mouse events over the text. So here you will need to use a layer with text ontop of that layer.

Regards
Daniel



> !!!!!!!!!!! Stupid Lookout Express!!
> > We had bug fix in 2.56 that added a trans gif to the background of any > newly generated layer in IE 6.
> Need to add to 3.0
>   ----- Original Message ----- 
>   From: Jesse Vitrone 
>   To: dyn...@li... 
>   Sent: Tuesday, November 25, 2003 8:37 AM
>   Subject: Re: [Dynapi-Help] offtopic? IE "clear cover layer"
> > >   Performance of dragging and resizing this layer-with-iframe went to > crap on Mozilla when I add that extra claer gif though, so I had to add > a check and only add the clear gif code for IE.  Mozilla doesn't seem to > resize images very well, things gets choppy.
> >   Everything is working well though, thanks again.
> >   Jesse
> >   Daniel Tiru wrote:
> > Yes this works very well, and it seams like you will be needing this for > ordinary layers if you are using mac ie 5 aswell... So we need to start > to learn this tecnique :)
> > /Daniel
> >   Perfect, works like a charm.  Thanks Arijit.
> > Arijit Das wrote:
> >     IE doesn't consider a layer to 'be there' unless there's content on 
> it, as far as I have seen.  A simple work-around would be to place a 
> clear, 1 pixel by 1 pixel image, in the cover layer and stretch it to 
> the layers width and height.
> > Hope that helps...
> > Arijit
> > > Jesse Vitrone wrote:
> >       I'm not sure if this is really on topic, but you guys know the > most 
> about this stuff, so I thought you might be able to help out.
> > I have layer A, which has an iframe on it.  I don't want people to be 
> able to click on the website in the iframe at certain times, so I 
> need to make a clear cover layer over it.  To do this, I added layer 
> B as a child of A, and it covers it completely.
> > In Mozilla - works great, you can see the page in the iframe, but 
> nothing is clickable.
> > Here's the problem:
> In IE - if I make the cover layer a color, then I only see the color, 
> and I can't click anything that it's covering, even when I click 
> where a link would normally be on the page below, so far so good.  
> But when I change the color of the cover layer to "transparent", then 
> it's like it's not there.  I can click right through it to the page 
> below.
> > Any ideas how to make a clear cover layer in IE?  Or is there someway 
> to make an iframe "view only" ?
> > Thanks in advance for the suggestions,
>    Jesse
> > > -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive?  Does it
> help you create better code?  SHARE THE LOVE, and help us help
> YOU!  Click Here: http://sourceforge.net/donate/
> _______________________________________________
> Dynapi-Help mailing list
> Dyn...@li...
> https://lists.sourceforge.net/lists/listinfo/dynapi-help
> >         
> > -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive?  Does it
> help you create better code?  SHARE THE LOVE, and help us help
> YOU!  Click Here: http://sourceforge.net/donate/
> _______________________________________________
> Dynapi-Help mailing list
> Dyn...@li...
> https://lists.sourceforge.net/lists/listinfo/dynapi-help
>       
> -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive?  Does it
> help you create better code?  SHARE THE LOVE, and help us help
> YOU!  Click Here: http://sourceforge.net/donate/
> _______________________________________________
> Dynapi-Help mailing list
> Dyn...@li...
> https://lists.sourceforge.net/lists/listinfo/dynapi-help
>     
> > > > -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive?  Does it
> help you create better code?  SHARE THE LOVE, and help us help
> YOU!  Click Here: http://sourceforge.net/donate/
> _______________________________________________
> Dynapi-Help mailing list
> Dyn...@li...
> https://lists.sourceforge.net/lists/listinfo/dynapi-help
>   ---Outgoing mail is certified Virus Free.Checked by AVG anti-virus > system (http://www.grisoft.com).Version: 6.0.543 / Virus Database: 337 - > Release Date: 11/21/03
> 
> -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive?  Does it
> help you create better code?  SHARE THE LOVE, and help us help
> YOU!  Click Here: http://sourceforge.net/donate/
> _______________________________________________
> Dynapi-Help mailing list
> Dyn...@li...
> https://lists.sourceforge.net/lists/listinfo/dynapi-help

Re: [Dynapi-Help] offtopic? IE "clear cover layer"

[Jesse V. <je...@6t...>]

Performance of dragging and resizing this layer-with-iframe went to crap 
on Mozilla when I add that extra claer gif though, so I had to add a 
check and only add the clear gif code for IE.  Mozilla doesn't seem to 
resize images very well, things gets choppy.

Everything is working well though, thanks again.

Jesse

Daniel Tiru wrote:

>Yes this works very well, and it seams like you will be needing this for ordinary layers if you are using mac ie 5 aswell... So we need to start to learn this tecnique :)
>
>/Daniel
>
>  
>
>>Perfect, works like a charm.  Thanks Arijit.
>>
>>Arijit Das wrote:
>>
>>    
>>
>>>IE doesn't consider a layer to 'be there' unless there's content on 
>>>it, as far as I have seen.  A simple work-around would be to place a 
>>>clear, 1 pixel by 1 pixel image, in the cover layer and stretch it to 
>>>the layers width and height.
>>>
>>>Hope that helps...
>>>
>>>Arijit
>>>
>>>
>>>Jesse Vitrone wrote:
>>>
>>>      
>>>
>>>>I'm not sure if this is really on topic, but you guys know the most 
>>>>about this stuff, so I thought you might be able to help out.
>>>>
>>>>I have layer A, which has an iframe on it.  I don't want people to be 
>>>>able to click on the website in the iframe at certain times, so I 
>>>>need to make a clear cover layer over it.  To do this, I added layer 
>>>>B as a child of A, and it covers it completely.
>>>>
>>>>In Mozilla - works great, you can see the page in the iframe, but 
>>>>nothing is clickable.
>>>>
>>>>Here's the problem:
>>>>In IE - if I make the cover layer a color, then I only see the color, 
>>>>and I can't click anything that it's covering, even when I click 
>>>>where a link would normally be on the page below, so far so good.  
>>>>But when I change the color of the cover layer to "transparent", then 
>>>>it's like it's not there.  I can click right through it to the page 
>>>>below.
>>>>
>>>>Any ideas how to make a clear cover layer in IE?  Or is there someway 
>>>>to make an iframe "view only" ?
>>>>
>>>>Thanks in advance for the suggestions,
>>>>   Jesse
>>>>
>>>>
>>>>-------------------------------------------------------
>>>>This SF.net email is sponsored by: SF.net Giveback Program.
>>>>Does SourceForge.net help you be more productive?  Does it
>>>>help you create better code?  SHARE THE LOVE, and help us help
>>>>YOU!  Click Here: http://sourceforge.net/donate/
>>>>_______________________________________________
>>>>Dynapi-Help mailing list
>>>>Dyn...@li...
>>>>https://lists.sourceforge.net/lists/listinfo/dynapi-help
>>>>
>>>>        
>>>>
>>>
>>>
>>>-------------------------------------------------------
>>>This SF.net email is sponsored by: SF.net Giveback Program.
>>>Does SourceForge.net help you be more productive?  Does it
>>>help you create better code?  SHARE THE LOVE, and help us help
>>>YOU!  Click Here: http://sourceforge.net/donate/
>>>_______________________________________________
>>>Dynapi-Help mailing list
>>>Dyn...@li...
>>>https://lists.sourceforge.net/lists/listinfo/dynapi-help
>>>      
>>>
>>
>>-------------------------------------------------------
>>This SF.net email is sponsored by: SF.net Giveback Program.
>>Does SourceForge.net help you be more productive?  Does it
>>help you create better code?  SHARE THE LOVE, and help us help
>>YOU!  Click Here: http://sourceforge.net/donate/
>>_______________________________________________
>>Dynapi-Help mailing list
>>Dyn...@li...
>>https://lists.sourceforge.net/lists/listinfo/dynapi-help
>>    
>>
>
>
>
>
>-------------------------------------------------------
>This SF.net email is sponsored by: SF.net Giveback Program.
>Does SourceForge.net help you be more productive?  Does it
>help you create better code?  SHARE THE LOVE, and help us help
>YOU!  Click Here: http://sourceforge.net/donate/
>_______________________________________________
>Dynapi-Help mailing list
>Dyn...@li...
>https://lists.sourceforge.net/lists/listinfo/dynapi-help
>  
>

Re: [Dynapi-Help] offtopic? IE "clear cover layer"

[Doug M. <do...@cr...>]

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.543 / Virus Database: 337 - Release Date: 11/21/03

Re: [Dynapi-Help] offtopic? IE "clear cover layer"

[Doug M. <do...@cr...>]

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.543 / Virus Database: 337 - Release Date: 11/21/03

Re: [Dynapi-Help] offtopic? IE "clear cover layer"

[Doug M. <do...@cr...>]

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.543 / Virus Database: 337 - Release Date: 11/21/03

Re: [Dynapi-Help] offtopic? IE "clear cover layer"

[Doug M. <do...@cr...>]

!!!!!!!!!!! Stupid Lookout Express!!

We had bug fix in 2.56 that added a trans gif to the background of any =
newly generated layer in IE 6.
Need to add to 3.0
  ----- Original Message -----=20
  From: Jesse Vitrone=20
  To: dyn...@li...=20
  Sent: Tuesday, November 25, 2003 8:37 AM
  Subject: Re: [Dynapi-Help] offtopic? IE "clear cover layer"


  Performance of dragging and resizing this layer-with-iframe went to =
crap on Mozilla when I add that extra claer gif though, so I had to add =
a check and only add the clear gif code for IE.  Mozilla doesn't seem to =
resize images very well, things gets choppy.

  Everything is working well though, thanks again.

  Jesse

  Daniel Tiru wrote:

Yes this works very well, and it seams like you will be needing this for =
ordinary layers if you are using mac ie 5 aswell... So we need to start =
to learn this tecnique :)

/Daniel

  Perfect, works like a charm.  Thanks Arijit.

Arijit Das wrote:

    IE doesn't consider a layer to 'be there' unless there's content on=20
it, as far as I have seen.  A simple work-around would be to place a=20
clear, 1 pixel by 1 pixel image, in the cover layer and stretch it to=20
the layers width and height.

Hope that helps...

Arijit


Jesse Vitrone wrote:

      I'm not sure if this is really on topic, but you guys know the =
most=20
about this stuff, so I thought you might be able to help out.

I have layer A, which has an iframe on it.  I don't want people to be=20
able to click on the website in the iframe at certain times, so I=20
need to make a clear cover layer over it.  To do this, I added layer=20
B as a child of A, and it covers it completely.

In Mozilla - works great, you can see the page in the iframe, but=20
nothing is clickable.

Here's the problem:
In IE - if I make the cover layer a color, then I only see the color,=20
and I can't click anything that it's covering, even when I click=20
where a link would normally be on the page below, so far so good. =20
But when I change the color of the cover layer to "transparent", then=20
it's like it's not there.  I can click right through it to the page=20
below.

Any ideas how to make a clear cover layer in IE?  Or is there someway=20
to make an iframe "view only" ?

Thanks in advance for the suggestions,
   Jesse


-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
Dynapi-Help mailing list
Dyn...@li...
https://lists.sourceforge.net/lists/listinfo/dynapi-help

       =20

-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
Dynapi-Help mailing list
Dyn...@li...
https://lists.sourceforge.net/lists/listinfo/dynapi-help
     =20
-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
Dynapi-Help mailing list
Dyn...@li...
https://lists.sourceforge.net/lists/listinfo/dynapi-help
   =20



-------------------------------------------------------
This SF.net email is sponsored by: SF.net Giveback Program.
Does SourceForge.net help you be more productive?  Does it
help you create better code?  SHARE THE LOVE, and help us help
YOU!  Click Here: http://sourceforge.net/donate/
_______________________________________________
Dynapi-Help mailing list
Dyn...@li...
https://lists.sourceforge.net/lists/listinfo/dynapi-help
  ---Outgoing mail is certified Virus Free.Checked by AVG anti-virus =
system (http://www.grisoft.com).Version: 6.0.543 / Virus Database: 337 - =
Release Date: 11/21/03