Menu
▾
▴
dynapi-dev
|
From: Robert R. <rra...@ya...> - 2001-02-17 20:39:43
|
I put a demo site at http://dynapi.sourceforge.net/dynapi/ of the type of site we could use for the main page. This would allow the site to be a bit more dynamic and up to date. So what do ya think? -- // Robert Rainwater ---------------------- DynAPI Snapshots: http://dynapi.sourceforge.net/snapshot/ DynAPI Homepage: http://dynapi.sourceforge.net/ |
|
From: Henrik V. <hv...@ya...> - 2001-02-17 21:16:33
|
Looks mighty good. It should be a boost having a community site like = this where we could all post our comments, links and widgets(no?), even = those of us that aren't amongst the core developers. might take away = some of the load on the mailing-lists too (especially the obvious = redundancy). I say, go for it! Henrik V=E5glin [ hv...@ya... ] BTW I submitted richard's site just as a tryout of the linking feature, = hope you didn't mind... =20 ----- Original Message -----=20 From: "Robert Rainwater" <rra...@ya...> To: "DynAPI Development List" <dyn...@li...> Sent: Saturday, February 17, 2001 9:40 PM Subject: [Dynapi-Dev] Demo Site >=20 > I put a demo site at http://dynapi.sourceforge.net/dynapi/ of the type > of site we could use for the main page. This would allow the site to > be a bit more dynamic and up to date. >=20 > So what do ya think? >=20 > --=20 > // Robert Rainwater > ---------------------- > DynAPI Snapshots: http://dynapi.sourceforge.net/snapshot/ > DynAPI Homepage: http://dynapi.sourceforge.net/ >=20 >=20 >=20 > _______________________________________________ > Dynapi-Dev mailing list > Dyn...@li... > http://lists.sourceforge.net/lists/listinfo/dynapi-dev >=20 _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com |
|
From: Doug M. <do...@cr...> - 2001-02-17 21:19:28
|
Very nice dude! While yer at it, how about gathering stats from visiters? Just a thought.. I would be willing to put a database/asp setup at www.allthewhile.com to store the data ----- Original Message ----- From: "Robert Rainwater" <rra...@ya...> To: "DynAPI Development List" <dyn...@li...> Sent: Saturday, February 17, 2001 12:40 PM Subject: [Dynapi-Dev] Demo Site > > I put a demo site at http://dynapi.sourceforge.net/dynapi/ of the type > of site we could use for the main page. This would allow the site to > be a bit more dynamic and up to date. > > So what do ya think? > > -- > // Robert Rainwater > ---------------------- > DynAPI Snapshots: http://dynapi.sourceforge.net/snapshot/ > DynAPI Homepage: http://dynapi.sourceforge.net/ > > > > _______________________________________________ > Dynapi-Dev mailing list > Dyn...@li... > http://lists.sourceforge.net/lists/listinfo/dynapi-dev --- Outgoing mail is certified Virus Free by AVG Free Edition http://www.grisoft.com/html/us_index.cfm Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.231 / Virus Database: 112 - Release Date: 2/12/01 |
|
From: Eytan H. <ey...@tr...> - 2001-02-17 21:34:38
|
Noticed that the sunewave doesn't work and also the ccreation.ext.keyevents.htm 8an |
|
From: Henrik V. <hv...@ya...> - 2001-02-17 22:51:14
|
What's your problem with ccreation keyevents extension, eh? ;) Which = system, platform & browser (version) are you using and7or getting what = error.=20 If you're refering to the one at richard's site I updated the distro = today and posted an open link to download it from (on xdrive.com) on the = help mailinglist in lack of other good webspace with FTP-access. = NS6-compability is in working right now, but I have no ability to try = under any other platform and/or browser than IE 5.5, NS4.x & just today = installed NS6 under win 98. If you leave a full bug report maybe I'm = able to get it fixed :) Henrik V=E5glin [ hv...@ya... ] =20 ----- Original Message -----=20 From: "Eytan Heidingsfeld" <ey...@tr...> To: <dyn...@li...> Sent: Saturday, February 17, 2001 10:35 PM Subject: RE: [Dynapi-Dev] Demo Site > Noticed that the sunewave doesn't work and also the=20 > ccreation.ext.keyevents.htm >=20 > 8an >=20 > _______________________________________________ > Dynapi-Dev mailing list > Dyn...@li... > http://lists.sourceforge.net/lists/listinfo/dynapi-dev >=20 _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com |
|
From: Richard B. <ma...@ri...> - 2001-02-18 00:19:12
|
I put up some ftp space here a while back, which is free for all, do what you want here: ftp.dynapi.f2s.com username: dynapi password: dynapi url: http://www.dynapi.f2s.com/dynapi/ It also supports PHP/Perl-cgi and Database. Cheers, Richard Bennett ma...@ri... www.richardinfo.com (Everything running on, and ported to the 19/12/2000 snapshot of DynAPI2) Find the DynAPI faq here: http://sourceforge.net/docman/display_doc.php?docid=656&group_id=5757 Browse the mailinglist here: http://www.mail-archive.com/index.php3?hunt=dynapi ----- Original Message ----- From: "Henrik Våglin" <hv...@ya...> To: <dyn...@li...> Sent: Saturday, February 17, 2001 11:54 PM Subject: Re: [Dynapi-Dev] Demo Site > What's your problem with ccreation keyevents extension, eh? ;) Which system, platform & browser (version) are you using and7or getting what error. > If you're refering to the one at richard's site I updated the distro today and posted an open link to download it from (on xdrive.com) on the help mailinglist in lack of other good webspace with FTP-access. NS6-compability is in working right now, but I have no ability to try under any other platform and/or browser than IE 5.5, NS4.x & just today installed NS6 under win 98. If you leave a full bug report maybe I'm able to get it fixed :) > > Henrik Våglin [ hv...@ya... ] > > ----- Original Message ----- > From: "Eytan Heidingsfeld" <ey...@tr...> > To: <dyn...@li...> > Sent: Saturday, February 17, 2001 10:35 PM > Subject: RE: [Dynapi-Dev] Demo Site > > > > Noticed that the sunewave doesn't work and also the > > ccreation.ext.keyevents.htm > > > > 8an > > > > _______________________________________________ > > Dynapi-Dev mailing list > > Dyn...@li... > > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > > > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > > _______________________________________________ > Dynapi-Dev mailing list > Dyn...@li... > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > ____________________________________________________________ > Get your free domain name and domain-based e-mail from > Namezero.com. New! Namezero Plus domains now available. > Find out more at: http://www.namezero.com > |
|
From: Henrik V. <hv...@ya...> - 2001-02-18 15:48:12
|
Oh, sorry for the ignorance Richard, I must've forgotten about it (the = load of mail to keep traack of. I'll see if I can upload it there now :) Henrik V=E5glin [ hv...@ya... ] ----- Original Message -----=20 From: "Richard Bennett" <ma...@ri...> To: <dyn...@li...> Sent: Sunday, February 18, 2001 1:19 AM Subject: Re: [Dynapi-Dev] Demo Site > I put up some ftp space here a while back, which is free for all, do = what > you want here: >=20 > ftp.dynapi.f2s.com > username: dynapi > password: dynapi > url: http://www.dynapi.f2s.com/dynapi/ > It also supports PHP/Perl-cgi and Database. >=20 > Cheers, > Richard Bennett >=20 > ma...@ri... > www.richardinfo.com > (Everything running on, and ported to the 19/12/2000 snapshot of = DynAPI2) > Find the DynAPI faq here: > = http://sourceforge.net/docman/display_doc.php?docid=3D656&group_id=3D5757= > Browse the mailinglist here: > http://www.mail-archive.com/index.php3?hunt=3Ddynapi >=20 > ----- Original Message ----- > From: "Henrik V=E5glin" <hv...@ya...> > To: <dyn...@li...> > Sent: Saturday, February 17, 2001 11:54 PM > Subject: Re: [Dynapi-Dev] Demo Site >=20 >=20 > > What's your problem with ccreation keyevents extension, eh? ;) Which > system, platform & browser (version) are you using and7or getting what > error. > > If you're refering to the one at richard's site I updated the distro = today > and posted an open link to download it from (on xdrive.com) on the = help > mailinglist in lack of other good webspace with FTP-access. = NS6-compability > is in working right now, but I have no ability to try under any other > platform and/or browser than IE 5.5, NS4.x & just today installed NS6 = under > win 98. If you leave a full bug report maybe I'm able to get it fixed = :) > > > > Henrik V=E5glin [ hv...@ya... ] > > > > ----- Original Message ----- > > From: "Eytan Heidingsfeld" <ey...@tr...> > > To: <dyn...@li...> > > Sent: Saturday, February 17, 2001 10:35 PM > > Subject: RE: [Dynapi-Dev] Demo Site > > > > > > > Noticed that the sunewave doesn't work and also the > > > ccreation.ext.keyevents.htm > > > > > > 8an > > > > > > _______________________________________________ > > > Dynapi-Dev mailing list > > > Dyn...@li... > > > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > > > > > > > > > _________________________________________________________ > > Do You Yahoo!? > > Get your free @yahoo.com address at http://mail.yahoo.com > > > > > > _______________________________________________ > > Dynapi-Dev mailing list > > Dyn...@li... > > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > > ____________________________________________________________ > > Get your free domain name and domain-based e-mail from > > Namezero.com. New! Namezero Plus domains now available. > > Find out more at: http://www.namezero.com > > >=20 >=20 > _______________________________________________ > Dynapi-Dev mailing list > Dyn...@li... > http://lists.sourceforge.net/lists/listinfo/dynapi-dev >=20 _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com |
|
From: Henrik V. <hv...@ya...> - 2001-02-18 16:23:11
|
No disrespect Richard, but download from your site doesn't seems to work =
out ("403 file access error"). I've uploaded the files though, so live =
run of the ccreation extension pack can now be done at
http://www.dynapi.f2s.com/dynapi/examples/ccreation.ext.keyevents.htm
http://www.dynapi.f2s.com/dynapi/examples/ccreation.ext.layerpos.htm
Now all; detailed testresults from running these on different platforms =
and browsers are apprieated. I've only run tests in IE5.5 NS4.76 and I'm =
on my way to get it to work in NS6 on a system with win98 and 128Mb RAM. =
if you do submit a bugreport, be sure to include the javascript and =
you're most welecome to also try and track down the javascript error if =
you're able. I'm not the most complete javascript programmer but at =
least I know the code somewhat, so do post ;)
Henrik V=E5glin [ hv...@ya... ]
----- Original Message -----=20
From: "Richard Bennett" <ma...@ri...>
To: <dyn...@li...>
Sent: Sunday, February 18, 2001 1:19 AM
Subject: Re: [Dynapi-Dev] Demo Site
> I put up some ftp space here a while back, which is free for all, do =
what
> you want here:
>=20
> ftp.dynapi.f2s.com
> username: dynapi
> password: dynapi
> url: http://www.dynapi.f2s.com/dynapi/
> It also supports PHP/Perl-cgi and Database.
>=20
> Cheers,
> Richard Bennett
>=20
> ma...@ri...
> www.richardinfo.com
> (Everything running on, and ported to the 19/12/2000 snapshot of =
DynAPI2)
> Find the DynAPI faq here:
> =
http://sourceforge.net/docman/display_doc.php?docid=3D656&group_id=3D5757=
> Browse the mailinglist here:
> http://www.mail-archive.com/index.php3?hunt=3Ddynapi
>=20
> ----- Original Message -----
> From: "Henrik V=E5glin" <hv...@ya...>
> To: <dyn...@li...>
> Sent: Saturday, February 17, 2001 11:54 PM
> Subject: Re: [Dynapi-Dev] Demo Site
>=20
>=20
> > What's your problem with ccreation keyevents extension, eh? ;) Which
> system, platform & browser (version) are you using and7or getting what
> error.
> > If you're refering to the one at richard's site I updated the distro =
today
> and posted an open link to download it from (on xdrive.com) on the =
help
> mailinglist in lack of other good webspace with FTP-access. =
NS6-compability
> is in working right now, but I have no ability to try under any other
> platform and/or browser than IE 5.5, NS4.x & just today installed NS6 =
under
> win 98. If you leave a full bug report maybe I'm able to get it fixed =
:)
> >
> > Henrik V=E5glin [ hv...@ya... ]
> >
> > ----- Original Message -----
> > From: "Eytan Heidingsfeld" <ey...@tr...>
> > To: <dyn...@li...>
> > Sent: Saturday, February 17, 2001 10:35 PM
> > Subject: RE: [Dynapi-Dev] Demo Site
> >
> >
> > > Noticed that the sunewave doesn't work and also the
> > > ccreation.ext.keyevents.htm
> > >
> > > 8an
> > >
> > > _______________________________________________
> > > Dynapi-Dev mailing list
> > > Dyn...@li...
> > > http://lists.sourceforge.net/lists/listinfo/dynapi-dev
> > >
> >
> >
> > _________________________________________________________
> > Do You Yahoo!?
> > Get your free @yahoo.com address at http://mail.yahoo.com
> >
> >
> > _______________________________________________
> > Dynapi-Dev mailing list
> > Dyn...@li...
> > http://lists.sourceforge.net/lists/listinfo/dynapi-dev
> > ____________________________________________________________
> > Get your free domain name and domain-based e-mail from
> > Namezero.com. New! Namezero Plus domains now available.
> > Find out more at: http://www.namezero.com
> >
>=20
>=20
> _______________________________________________
> Dynapi-Dev mailing list
> Dyn...@li...
> http://lists.sourceforge.net/lists/listinfo/dynapi-dev
>=20
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
|
|
From: Richard B. <ma...@ri...> - 2001-02-18 16:39:14
|
:o) I updated them yesterday. The old (not working files are still on the server though, so come in the front door: http://www.richardinfo.com/?menu=examples&node=7 Apart from that the ftp is better for cross browser testing, as my site doesn't support NS6 yet. The only problem is they're not keen on .zip files, and they change the file permissions on them. Why exactly have you given up on the modifier issue? I know NS/IE is possible, is it a Mac problem? Richard ----- Original Message ----- From: "Henrik Våglin" <hv...@ya...> To: <dyn...@li...> Sent: Sunday, February 18, 2001 5:26 PM Subject: Re: [Dynapi-Dev] Demo Site > No disrespect Richard, but download from your site doesn't seems to work out ("403 file access error"). I've uploaded the files though, so live run of the ccreation extension pack can now be done at > > http://www.dynapi.f2s.com/dynapi/examples/ccreation.ext.keyevents.htm > http://www.dynapi.f2s.com/dynapi/examples/ccreation.ext.layerpos.htm > > Now all; detailed testresults from running these on different platforms and browsers are apprieated. I've only run tests in IE5.5 NS4.76 and I'm on my way to get it to work in NS6 on a system with win98 and 128Mb RAM. if you do submit a bugreport, be sure to include the javascript and you're most welecome to also try and track down the javascript error if you're able. I'm not the most complete javascript programmer but at least I know the code somewhat, so do post ;) > > Henrik Våglin [ hv...@ya... ] > > > ----- Original Message ----- > From: "Richard Bennett" <ma...@ri...> > To: <dyn...@li...> > Sent: Sunday, February 18, 2001 1:19 AM > Subject: Re: [Dynapi-Dev] Demo Site > > > > I put up some ftp space here a while back, which is free for all, do what > > you want here: > > > > ftp.dynapi.f2s.com > > username: dynapi > > password: dynapi > > url: http://www.dynapi.f2s.com/dynapi/ > > It also supports PHP/Perl-cgi and Database. > > > > Cheers, > > Richard Bennett > > > > ma...@ri... > > www.richardinfo.com > > (Everything running on, and ported to the 19/12/2000 snapshot of DynAPI2) > > Find the DynAPI faq here: > > http://sourceforge.net/docman/display_doc.php?docid=656&group_id=5757 > > Browse the mailinglist here: > > http://www.mail-archive.com/index.php3?hunt=dynapi > > > > ----- Original Message ----- > > From: "Henrik Våglin" <hv...@ya...> > > To: <dyn...@li...> > > Sent: Saturday, February 17, 2001 11:54 PM > > Subject: Re: [Dynapi-Dev] Demo Site > > > > > > > What's your problem with ccreation keyevents extension, eh? ;) Which > > system, platform & browser (version) are you using and7or getting what > > error. > > > If you're refering to the one at richard's site I updated the distro today > > and posted an open link to download it from (on xdrive.com) on the help > > mailinglist in lack of other good webspace with FTP-access. NS6-compability > > is in working right now, but I have no ability to try under any other > > platform and/or browser than IE 5.5, NS4.x & just today installed NS6 under > > win 98. If you leave a full bug report maybe I'm able to get it fixed :) > > > > > > Henrik Våglin [ hv...@ya... ] > > > > > > ----- Original Message ----- > > > From: "Eytan Heidingsfeld" <ey...@tr...> > > > To: <dyn...@li...> > > > Sent: Saturday, February 17, 2001 10:35 PM > > > Subject: RE: [Dynapi-Dev] Demo Site > > > > > > > > > > Noticed that the sunewave doesn't work and also the > > > > ccreation.ext.keyevents.htm > > > > > > > > 8an > > > > > > > > _______________________________________________ > > > > Dynapi-Dev mailing list > > > > Dyn...@li... > > > > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > > > > > > > > > > > > > _________________________________________________________ > > > Do You Yahoo!? > > > Get your free @yahoo.com address at http://mail.yahoo.com > > > > > > > > > _______________________________________________ > > > Dynapi-Dev mailing list > > > Dyn...@li... > > > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > > > ____________________________________________________________ > > > Get your free domain name and domain-based e-mail from > > > Namezero.com. New! Namezero Plus domains now available. > > > Find out more at: http://www.namezero.com > > > > > > > > > _______________________________________________ > > Dynapi-Dev mailing list > > Dyn...@li... > > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > > > > > _________________________________________________________ > Do You Yahoo!? > Get your free @yahoo.com address at http://mail.yahoo.com > > > _______________________________________________ > Dynapi-Dev mailing list > Dyn...@li... > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > ____________________________________________________________ > Get your free domain name and domain-based e-mail from > Namezero.com. New! Namezero Plus domains now available. > Find out more at: http://www.namezero.com > |
|
From: Henrik V. <hv...@ya...> - 2001-02-18 17:56:57
|
No, I haven't given up on the modifier issue. In fact it's in the last = update (ccreation.2001.02.17). just have to bug-test and get it fixed = for NS6. Check out the exempelfiles I updated to the ftp-site, the CTRL = feature works in IE5 AND NS4.76 :) The alt key doesn't work in NS4 so I = didn't include it. BTW the layerpos I can't do anything about get NS6-compatible since it = depends totally upon the getWidth/getHeight (and getX/getY) of = dyndocument/dynlayer. Should be working when the rest of dynapi is = NS6-compatible though. Henrik V=E5glin [ hv...@ya... ] ----- Original Message -----=20 From: "Richard Bennett" <ma...@ri...> To: <dyn...@li...> Sent: Sunday, February 18, 2001 5:39 PM Subject: Re: [Dynapi-Dev] Demo Site > :o) I updated them yesterday. > The old (not working files are still on the server though, so come in = the > front door: > http://www.richardinfo.com/?menu=3Dexamples&node=3D7 >=20 >=20 > Apart from that the ftp is better for cross browser testing, as my = site > doesn't support NS6 yet. > The only problem is they're not keen on .zip files, and they change = the file > permissions on them. >=20 > Why exactly have you given up on the modifier issue? I know NS/IE is > possible, is it a Mac problem? >=20 > Richard >=20 > ----- Original Message ----- > From: "Henrik V=E5glin" <hv...@ya...> > To: <dyn...@li...> > Sent: Sunday, February 18, 2001 5:26 PM > Subject: Re: [Dynapi-Dev] Demo Site >=20 >=20 > > No disrespect Richard, but download from your site doesn't seems to = work > out ("403 file access error"). I've uploaded the files though, so live = run > of the ccreation extension pack can now be done at > > > > = http://www.dynapi.f2s.com/dynapi/examples/ccreation.ext.keyevents.htm > > http://www.dynapi.f2s.com/dynapi/examples/ccreation.ext.layerpos.htm > > > > Now all; detailed testresults from running these on different = platforms > and browsers are apprieated. I've only run tests in IE5.5 NS4.76 and = I'm on > my way to get it to work in NS6 on a system with win98 and 128Mb RAM. = if you > do submit a bugreport, be sure to include the javascript and you're = most > welecome to also try and track down the javascript error if you're = able. I'm > not the most complete javascript programmer but at least I know the = code > somewhat, so do post ;) > > > > Henrik V=E5glin [ hv...@ya... ] > > > > > > ----- Original Message ----- > > From: "Richard Bennett" <ma...@ri...> > > To: <dyn...@li...> > > Sent: Sunday, February 18, 2001 1:19 AM > > Subject: Re: [Dynapi-Dev] Demo Site > > > > > > > I put up some ftp space here a while back, which is free for all, = do > what > > > you want here: > > > > > > ftp.dynapi.f2s.com > > > username: dynapi > > > password: dynapi > > > url: http://www.dynapi.f2s.com/dynapi/ > > > It also supports PHP/Perl-cgi and Database. > > > > > > Cheers, > > > Richard Bennett > > > > > > ma...@ri... > > > www.richardinfo.com > > > (Everything running on, and ported to the 19/12/2000 snapshot of > DynAPI2) > > > Find the DynAPI faq here: > > > = http://sourceforge.net/docman/display_doc.php?docid=3D656&group_id=3D5757= > > > Browse the mailinglist here: > > > http://www.mail-archive.com/index.php3?hunt=3Ddynapi > > > > > > ----- Original Message ----- > > > From: "Henrik V=E5glin" <hv...@ya...> > > > To: <dyn...@li...> > > > Sent: Saturday, February 17, 2001 11:54 PM > > > Subject: Re: [Dynapi-Dev] Demo Site > > > > > > > > > > What's your problem with ccreation keyevents extension, eh? ;) = Which > > > system, platform & browser (version) are you using and7or getting = what > > > error. > > > > If you're refering to the one at richard's site I updated the = distro > today > > > and posted an open link to download it from (on xdrive.com) on the = help > > > mailinglist in lack of other good webspace with FTP-access. > NS6-compability > > > is in working right now, but I have no ability to try under any = other > > > platform and/or browser than IE 5.5, NS4.x & just today installed = NS6 > under > > > win 98. If you leave a full bug report maybe I'm able to get it = fixed :) > > > > > > > > Henrik V=E5glin [ hv...@ya... ] > > > > > > > > ----- Original Message ----- > > > > From: "Eytan Heidingsfeld" <ey...@tr...> > > > > To: <dyn...@li...> > > > > Sent: Saturday, February 17, 2001 10:35 PM > > > > Subject: RE: [Dynapi-Dev] Demo Site > > > > > > > > > > > > > Noticed that the sunewave doesn't work and also the > > > > > ccreation.ext.keyevents.htm > > > > > > > > > > 8an > > > > > > > > > > _______________________________________________ > > > > > Dynapi-Dev mailing list > > > > > Dyn...@li... > > > > > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > > > > > > > > > > > > > > > > > _________________________________________________________ > > > > Do You Yahoo!? > > > > Get your free @yahoo.com address at http://mail.yahoo.com > > > > > > > > > > > > _______________________________________________ > > > > Dynapi-Dev mailing list > > > > Dyn...@li... > > > > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > > > > ____________________________________________________________ > > > > Get your free domain name and domain-based e-mail from > > > > Namezero.com. New! Namezero Plus domains now available. > > > > Find out more at: http://www.namezero.com > > > > > > > > > > > > > _______________________________________________ > > > Dynapi-Dev mailing list > > > Dyn...@li... > > > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > > > > > > > > > _________________________________________________________ > > Do You Yahoo!? > > Get your free @yahoo.com address at http://mail.yahoo.com > > > > > > _______________________________________________ > > Dynapi-Dev mailing list > > Dyn...@li... > > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > > ____________________________________________________________ > > Get your free domain name and domain-based e-mail from > > Namezero.com. New! Namezero Plus domains now available. > > Find out more at: http://www.namezero.com > > >=20 >=20 > _______________________________________________ > Dynapi-Dev mailing list > Dyn...@li... > http://lists.sourceforge.net/lists/listinfo/dynapi-dev >=20 _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com |
|
From: Liam C. <met...@ma...> - 2001-02-19 13:40:35
|
As a comment on using the DynAPI as part of the demo site, I would suggest against it. As the central source of all info about the project we should take particular care that the site is usable by the widest possible audience that could wish to find out and contribute to the project. Utilising the DynAPI on the site - whilst tempting - would not help the projects exposure. Certain scenarios in particular spring to mind: 1) A client, journalist, boss, project-manager, or other non-tech but important person attempting to verify information from developers on DynAPI's suitability - whilst accessing using IE 4.0PC/Mac, NN 3, IE5Mac or NN6/Mozilla (depending on their level of tech expertise) would not be impressed, unless extensive work was taken to degrade the site gracefully. 3) Existing developers attempting to fix bugs in currently non or partially supported browser may be hampered. (A current problem for Mac users attempting to see self-executing examples at dynacore/richardinfo) 2) Potential developers of currently unsupported browsers, or with versions with specific bugs in (e.g. Konqueror, Opera, OmniWeb whatever) By all means we should have a fully impressive arsenal of examples as part of the site, but not integrated into its core as a info-based site. Just my 2p Liam -- "Everything in moderation ... including moderation" pgp on request |
|
From: Liam C. <met...@ma...> - 2001-02-19 13:40:36
|
Tested the online version with:
A-Z, 0-9, Shift, Ctrl, Option/Alt, Apple/Command, Enter, Arrow keys, Return,
Tab, Space
IE5Mac - all modifier keys and normal key codes return a value immediately,
including the Apple key (code 91), Shift causes an Alert 'SHIFT!', Ctrl
moves the layer.
But the key codes for simultaneous keys only return the normal key value
E.g. Alt and Y returns value for normal Y
NN47Mac - all normal keys return a value immediately, but the modifier keys
require a simultaneous normal key press to return a value:
E.g. SHIFT and Y returns 'SHIFT!' and no key code
Ctrl and Y moves the layer and return Y's normal key-code
Alt and Y returns special char key code (180 rather than 121)
Liam
--
"Everything in moderation ... including moderation"
pgp on request
|
|
From: Henrik V. <hv...@ya...> - 2001-02-19 17:56:55
|
Thanx for the report Liam. I'm glad that it at least seems to be mostly = working as intended on Mac and nearly as good as on the PC in the both = major browsers. (if I didn't get you totally wrong that is ;) I dunno why I wasn't able to restrict what keys are releasing the alert = keycode message (it was meant ot only be triggered on char keys = keycodes) Now ALT isn't made to be recognized a modifier key because of its = lacking support in NS4.x (although a lot of articles suggests it to be = the most cross-platform/-browser key). Return/Enter maybe should've been a key property, but it seems too = hard/impossible to get it working as intended for all systems. Dunno if it's really to be considered a bug that modifier key + char key = returns values and actions like it does. I think with a better example = (and whose to blame but me :) where a event was actually assigned this = wouldn't be a problem, though I have a feeling the best thing is to not = use the modifier keys in combos, but rather as toggling between = different control modes. Thanks a lot for the test anyways :) =20 Next thing up to solve is NS6-compability - a hard bullet to avoid, = considering the vast and insuficient documentation on the issue (and how = far is dynapi supporting it in this state of development?). Henrik V=E5glin [ hv...@ya... ] ----- Original Message -----=20 From: "Liam Clancy" <met...@ma...> To: "dynapi dev lists.sourceforge.net" = <dyn...@li...> Sent: Monday, February 19, 2001 2:39 PM Subject: [Dynapi-Dev] ccreation extension on Mac >=20 > Tested the online version with: >=20 > A-Z, 0-9, Shift, Ctrl, Option/Alt, Apple/Command, Enter, Arrow keys, = Return, > Tab, Space >=20 > IE5Mac - all modifier keys and normal key codes return a value = immediately, > including the Apple key (code 91), Shift causes an Alert 'SHIFT!', = Ctrl > moves the layer. > But the key codes for simultaneous keys only return the normal key = value >=20 > E.g. Alt and Y returns value for normal Y >=20 > NN47Mac - all normal keys return a value immediately, but the modifier = keys > require a simultaneous normal key press to return a value: >=20 > E.g. SHIFT and Y returns 'SHIFT!' and no key code > Ctrl and Y moves the layer and return Y's normal key-code > Alt and Y returns special char key code (180 rather than 121) >=20 > Liam >=20 > --=20 > "Everything in moderation ... including moderation" >=20 > pgp on request >=20 >=20 > _______________________________________________ > Dynapi-Dev mailing list > Dyn...@li... > http://lists.sourceforge.net/lists/listinfo/dynapi-dev >=20 _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com |
|
From: Simon D. M. <di...@bi...> - 2001-02-19 22:39:59
|
Here's a solution for NS6 getContentHeight/Width:
get the dimensions of the inner child.
Well, it works for DynLayers with only one child which is all
that's needed for widgets such as Label.
I also found it better on IE5.
Maybe you could use it as a stop-gap (even call it
DynLayer.prototype.getOnlyChildHeight/Width).
Here's what I did with a version of Label I was working on:
Label.prototype.getContentWidth=function(){
if(is.ie)return this.elm.children[0].clientWidth
else if(is.ns4)return this.doc.width
else if(is.ns5)return
parseInt(getComputedStyle(this.elm.firstChild,0).getPropertyValue("width"))
}
Label.prototype.getContentHeight=function(){
if(is.ie)return this.elm.children[0].clientHeight
else if(is.ns4)return this.doc.height
else if(is.ns5)return
parseInt(getComputedStyle(this.elm.firstChild,0).getPropertyValue("height"))
}
You can see it working with pre-precreate version of DynAPI on the demos at:
http://www.montford.f2s.com/dynatrix_docs/tutorial/label.html
Tested on ns4.7, ie5 and ns6 for Windows.
I played briefly on ie4.5 for Mac and it seemed to size OK (although I
noticed that the text selection
didn't turn on and off).
Dicon
|
|
From: wes c. <we...@we...> - 2001-02-20 04:18:02
|
I tried this widget and noticed your border settings were ordered top,
bottom, left, right.
It seems every other dynapi widget used top, right, bottom, left. I
personally find it helpful to have most widgets work the same way,
otherwise liked the interface and documentation, along with the widget.
wes
Simon Dicon Montford wrote:
>
> Here's a solution for NS6 getContentHeight/Width:
> get the dimensions of the inner child.
>
> Well, it works for DynLayers with only one child which is all
> that's needed for widgets such as Label.
>
> I also found it better on IE5.
>
> Maybe you could use it as a stop-gap (even call it
> DynLayer.prototype.getOnlyChildHeight/Width).
>
> Here's what I did with a version of Label I was working on:
>
> Label.prototype.getContentWidth=function(){
> if(is.ie)return this.elm.children[0].clientWidth
> else if(is.ns4)return this.doc.width
> else if(is.ns5)return
> parseInt(getComputedStyle(this.elm.firstChild,0).getPropertyValue("width"))
> }
> Label.prototype.getContentHeight=function(){
> if(is.ie)return this.elm.children[0].clientHeight
> else if(is.ns4)return this.doc.height
> else if(is.ns5)return
> parseInt(getComputedStyle(this.elm.firstChild,0).getPropertyValue("height"))
> }
>
> You can see it working with pre-precreate version of DynAPI on the demos at:
>
> http://www.montford.f2s.com/dynatrix_docs/tutorial/label.html
>
> Tested on ns4.7, ie5 and ns6 for Windows.
>
> I played briefly on ie4.5 for Mac and it seemed to size OK (although I
> noticed that the text selection
> didn't turn on and off).
>
> Dicon
>
> _______________________________________________
> Dynapi-Dev mailing list
> Dyn...@li...
> http://lists.sourceforge.net/lists/listinfo/dynapi-dev
|
|
From: Simon D. M. <di...@bi...> - 2001-02-20 15:19:36
|
> I tried this widget and noticed your border settings were ordered top,
> bottom, left, right.
> It seems every other dynapi widget used top, right, bottom, left. I
> personally find it helpful to have most widgets work the same way,
the setPadding and setBorder methods work in the standard way [t,r,b,l],
it's only the test harness' interface that orders them differently
> otherwise liked the interface and documentation, along with the widget.
Thanks, any comment on the method of getting content size?
Dicon
> Simon Dicon Montford wrote:
> >
> > Here's a solution for NS6 getContentHeight/Width:
> > get the dimensions of the inner child.
> >
> > Well, it works for DynLayers with only one child which is all
> > that's needed for widgets such as Label.
> >
> > I also found it better on IE5.
> >
> > Maybe you could use it as a stop-gap (even call it
> > DynLayer.prototype.getOnlyChildHeight/Width).
> >
> > Here's what I did with a version of Label I was working on:
> >
> > Label.prototype.getContentWidth=function(){
> > if(is.ie)return this.elm.children[0].clientWidth
> > else if(is.ns4)return this.doc.width
> > else if(is.ns5)return
> >
> parseInt(getComputedStyle(this.elm.firstChild,0).getPropertyValue(
> "width"))
> > }
> > Label.prototype.getContentHeight=function(){
> > if(is.ie)return this.elm.children[0].clientHeight
> > else if(is.ns4)return this.doc.height
> > else if(is.ns5)return
> >
> parseInt(getComputedStyle(this.elm.firstChild,0).getPropertyValue(
"height"))
> > }
> >
> > You can see it working with pre-precreate version of DynAPI on
> the demos at:
> >
> > http://www.montford.f2s.com/dynatrix_docs/tutorial/label.html
> >
> > Tested on ns4.7, ie5 and ns6 for Windows.
> >
> > I played briefly on ie4.5 for Mac and it seemed to size OK (although I
> > noticed that the text selection
> > didn't turn on and off).
> >
> > Dicon
> >
> > _______________________________________________
> > Dynapi-Dev mailing list
> > Dyn...@li...
> > http://lists.sourceforge.net/lists/listinfo/dynapi-dev
>
> _______________________________________________
> Dynapi-Dev mailing list
> Dyn...@li...
> http://lists.sourceforge.net/lists/listinfo/dynapi-dev
|
|
From: Richard E. <emb...@co...> - 2001-02-20 15:55:00
|
This question regards only netscape 4 and the included html attachments are only meant for Netscape 4 browser viewing. The question is: why does using the "new Layer()" constructor work (l1.html) while using the LAYER tag not work (l2.html). Using the LAYER tag creates a second window while using the Layer constructor simply puts the layer in the existing window. I'm trying to understand why in dylayer.js the Layer constructor is used and not the LAYER tag. Thanks. Richard Emberson |
|
From: Richard B. <ma...@ri...> - 2001-02-17 22:01:30
|
It's definitely a lot more dynamic on the database side, and a big improvement, but why not use some DynAPI code? wouldn't the main menu look good made with list.js? The opensource site I've always regarded as a nice example is www.php.net Richard. ----- Original Message ----- From: "Robert Rainwater" <rra...@ya...> To: "DynAPI Development List" <dyn...@li...> Sent: Saturday, February 17, 2001 9:40 PM Subject: [Dynapi-Dev] Demo Site > > I put a demo site at http://dynapi.sourceforge.net/dynapi/ of the type > of site we could use for the main page. This would allow the site to > be a bit more dynamic and up to date. > > So what do ya think? > > -- > // Robert Rainwater > ---------------------- > DynAPI Snapshots: http://dynapi.sourceforge.net/snapshot/ > DynAPI Homepage: http://dynapi.sourceforge.net/ > > > > _______________________________________________ > Dynapi-Dev mailing list > Dyn...@li... > http://lists.sourceforge.net/lists/listinfo/dynapi-dev > ____________________________________________________________ > Get your free domain name and domain-based e-mail from > Namezero.com. New! Namezero Plus domains now available. > Find out more at: http://www.namezero.com > |
|
From: Robert R. <rra...@ya...> - 2001-02-17 22:07:16
|
I didnt change the default template any. I was just trying to give everyone an idea. I welcome anyone to come up with the design. Since its template based anyway, it could easily be changed to use some DynAPI components. -- // Robert Rainwater On 2/17/2001, 5:02:04 PM EST, Richard wrote about "[Dynapi-Dev] Demo Site": > It's definitely a lot more dynamic on the database side, and a big > improvement, but why not use some DynAPI code? wouldn't the main menu look > good made with list.js? > The opensource site I've always regarded as a nice example is www.php.net > Richard. > ----- Original Message ----- > From: "Robert Rainwater" <rra...@ya...> > To: "DynAPI Development List" <dyn...@li...> > Sent: Saturday, February 17, 2001 9:40 PM > Subject: [Dynapi-Dev] Demo Site >> >> I put a demo site at http://dynapi.sourceforge.net/dynapi/ of the type >> of site we could use for the main page. This would allow the site to >> be a bit more dynamic and up to date. >> >> So what do ya think? >> >> -- >> // Robert Rainwater >> ---------------------- >> DynAPI Snapshots: http://dynapi.sourceforge.net/snapshot/ >> DynAPI Homepage: http://dynapi.sourceforge.net/ >> >> >> >> _______________________________________________ >> Dynapi-Dev mailing list >> Dyn...@li... >> http://lists.sourceforge.net/lists/listinfo/dynapi-dev >> ____________________________________________________________ >> Get your free domain name and domain-based e-mail from >> Namezero.com. New! Namezero Plus domains now available. >> Find out more at: http://www.namezero.com >> > _______________________________________________ > Dynapi-Dev mailing list > Dyn...@li... > http://lists.sourceforge.net/lists/listinfo/dynapi-dev ---------------------- DynAPI Snapshots: http://dynapi.sourceforge.net/snapshot/ DynAPI Homepage: http://dynapi.sourceforge.net/ |
|
From: Robert R. <rra...@ya...> - 2001-02-17 22:09:08
|
I forgot to say that it supports themes, so maybe I can build a DynAPI based theme for it. -- // Robert Rainwater On 2/17/2001, 5:02:04 PM EST, Richard wrote about "[Dynapi-Dev] Demo Site": > It's definitely a lot more dynamic on the database side, and a big > improvement, but why not use some DynAPI code? wouldn't the main menu look > good made with list.js? > The opensource site I've always regarded as a nice example is www.php.net > Richard. > ----- Original Message ----- > From: "Robert Rainwater" <rra...@ya...> > To: "DynAPI Development List" <dyn...@li...> > Sent: Saturday, February 17, 2001 9:40 PM > Subject: [Dynapi-Dev] Demo Site >> >> I put a demo site at http://dynapi.sourceforge.net/dynapi/ of the type >> of site we could use for the main page. This would allow the site to >> be a bit more dynamic and up to date. >> >> So what do ya think? >> >> -- >> // Robert Rainwater >> ---------------------- >> DynAPI Snapshots: http://dynapi.sourceforge.net/snapshot/ >> DynAPI Homepage: http://dynapi.sourceforge.net/ >> >> >> >> _______________________________________________ >> Dynapi-Dev mailing list >> Dyn...@li... >> http://lists.sourceforge.net/lists/listinfo/dynapi-dev >> ____________________________________________________________ >> Get your free domain name and domain-based e-mail from >> Namezero.com. New! Namezero Plus domains now available. >> Find out more at: http://www.namezero.com >> > _______________________________________________ > Dynapi-Dev mailing list > Dyn...@li... > http://lists.sourceforge.net/lists/listinfo/dynapi-dev ---------------------- DynAPI Snapshots: http://dynapi.sourceforge.net/snapshot/ DynAPI Homepage: http://dynapi.sourceforge.net/ |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X