Menu
▾
▴
dynapi-dev
|
From: Doug M. <do...@cr...> - 2003-03-28 06:47:31
|
a point.. it seems that you must define the size of a layer before you = set it's anchor, unless you intend to set all 4 dimension in the anchor.. can this be = fixed somehow? And once the anchor is set, even if you did not define it left (for = instance) you can not resize thelayer.. It would be nice I I could anchor a layer to the top+right of it's = parent, but still be able to change it's width or hight afterwards. |
|
From: Raymond I. <xw...@ya...> - 2003-03-28 15:13:32
|
--- Doug Melvin <do...@cr...> wrote:
> a point.. it seems that you must define the size of
> a layer before you set it's anchor,
> unless you intend to set all 4 dimension in the
> anchor.. can this be fixed somehow?
Please send me a working example of the above and I'll
take a look at it.
> And once the anchor is set, even if you did not
> define it left (for instance) you can not resize
> thelayer..
>
> It would be nice I I could anchor a layer to the
> top+right of it's parent, but still be able to
> change it's width or hight
> afterwards.
That should be possible with
setAnchor({top:0,right:0}). You should then be able to
change the width and height without any problem at
all. If you can't change the width/height after
setting the anchor then send me a working example so I
can take a look at it
--
Raymond Irving
__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
|
|
From: Doug M. <do...@cr...> - 2003-03-29 02:17:47
Attachments:
anchor-issue.zip
|
In creating the attached example I discovered the following:
The width of the button is being changed, but the anchor parameters are not
being utilized after the size change.
When you click the link to change to width to 1 pixel you will notice that
the button is set to a width of 1, but the button's left position is not
changed..
Meaning, that the parameter of right:0 is no longer honored
You can see the same when you set the height of the layer, the layer's x
potion doe snot change,
therfore not honering the bottom:0 parameter.
As the only parameters passed to setAnchor (in this case) are
right:0,bottom:0
one would dexpect that after changing the size, that the layer would be
re-anchored to
right:0,bottom:0
On other words, the anchors work great, until you change the size of the
layer,
at which point the anchors are no longer honored..
----- Original Message -----
From: "Raymond Irving" <xw...@ya...>
To: "Doug Melvin" <do...@cr...>;
<dyn...@li...>
Sent: Friday, March 28, 2003 7:13 AM
Subject: Re: [Dynapi-Dev] anchors:
>
> --- Doug Melvin <do...@cr...> wrote:
> > a point.. it seems that you must define the size of
> > a layer before you set it's anchor,
> > unless you intend to set all 4 dimension in the
> > anchor.. can this be fixed somehow?
>
> Please send me a working example of the above and I'll
> take a look at it.
>
> > And once the anchor is set, even if you did not
> > define it left (for instance) you can not resize
> > thelayer..
> >
> > It would be nice I I could anchor a layer to the
> > top+right of it's parent, but still be able to
> > change it's width or hight
> > afterwards.
>
> That should be possible with
> setAnchor({top:0,right:0}). You should then be able to
> change the width and height without any problem at
> all. If you can't change the width/height after
> setting the anchor then send me a working example so I
> can take a look at it
>
> --
> Raymond Irving
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
> http://platinum.yahoo.com
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by:
> The Definitive IT and Networking Event. Be There!
> NetWorld+Interop Las Vegas 2003 -- Register today!
> http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> _______________________________________________
> Dynapi-Dev mailing list
> Dyn...@li...
> http://www.mail-archive.com/dyn...@li.../
>
|
|
From: Raymond I. <xw...@ya...> - 2003-03-30 17:20:53
|
I've uploaded the fix to the cvs. Please checkout the
files to see if it's working ok. Thanks again for the
example.
--
Raymond Irving
--- Doug Melvin <do...@cr...> wrote:
> In creating the attached example I discovered the
> following:
> The width of the button is being changed, but the
> anchor parameters are not
> being utilized after the size change.
>
> When you click the link to change to width to 1
> pixel you will notice that
> the button is set to a width of 1, but the button's
> left position is not
> changed..
> Meaning, that the parameter of right:0 is no longer
> honored
>
> You can see the same when you set the height of the
> layer, the layer's x
> potion doe snot change,
> therfore not honering the bottom:0 parameter.
>
> As the only parameters passed to setAnchor (in this
> case) are
> right:0,bottom:0
> one would dexpect that after changing the size, that
> the layer would be
> re-anchored to
> right:0,bottom:0
>
> On other words, the anchors work great, until you
> change the size of the
> layer,
> at which point the anchors are no longer honored..
>
> ----- Original Message -----
> From: "Raymond Irving" <xw...@ya...>
> To: "Doug Melvin" <do...@cr...>;
> <dyn...@li...>
> Sent: Friday, March 28, 2003 7:13 AM
> Subject: Re: [Dynapi-Dev] anchors:
>
>
> >
> > --- Doug Melvin <do...@cr...>
> wrote:
> > > a point.. it seems that you must define the size
> of
> > > a layer before you set it's anchor,
> > > unless you intend to set all 4 dimension in the
> > > anchor.. can this be fixed somehow?
> >
> > Please send me a working example of the above and
> I'll
> > take a look at it.
> >
> > > And once the anchor is set, even if you did not
> > > define it left (for instance) you can not resize
> > > thelayer..
> > >
> > > It would be nice I I could anchor a layer to the
> > > top+right of it's parent, but still be able to
> > > change it's width or hight
> > > afterwards.
> >
> > That should be possible with
> > setAnchor({top:0,right:0}). You should then be
> able to
> > change the width and height without any problem at
> > all. If you can't change the width/height after
> > setting the anchor then send me a working example
> so I
> > can take a look at it
> >
> > --
> > Raymond Irving
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Platinum - Watch CBS' NCAA March Madness,
> live on your desktop!
> > http://platinum.yahoo.com
> >
> >
> >
>
-------------------------------------------------------
> > This SF.net email is sponsored by:
> > The Definitive IT and Networking Event. Be There!
> > NetWorld+Interop Las Vegas 2003 -- Register today!
> >
>
http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> > _______________________________________________
> > Dynapi-Dev mailing list
> > Dyn...@li...
> >
>
http://www.mail-archive.com/dyn...@li.../
> >
>
> ATTACHMENT part 2 application/x-compressed
name=anchor-issue.zip
__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com
|
|
From: Doug M. <do...@cr...> - 2003-04-01 06:03:12
|
Beauty!!!
Check out the attached example boys and girls(?)
----- Original Message -----
From: "Raymond Irving" <xw...@ya...>
To: <dyn...@li...>
Sent: Sunday, March 30, 2003 9:20 AM
Subject: Re: [Dynapi-Dev] anchors:
>
> I've uploaded the fix to the cvs. Please checkout the
> files to see if it's working ok. Thanks again for the
> example.
>
> --
> Raymond Irving
>
> --- Doug Melvin <do...@cr...> wrote:
> > In creating the attached example I discovered the
> > following:
> > The width of the button is being changed, but the
> > anchor parameters are not
> > being utilized after the size change.
> >
> > When you click the link to change to width to 1
> > pixel you will notice that
> > the button is set to a width of 1, but the button's
> > left position is not
> > changed..
> > Meaning, that the parameter of right:0 is no longer
> > honored
> >
> > You can see the same when you set the height of the
> > layer, the layer's x
> > potion doe snot change,
> > therfore not honering the bottom:0 parameter.
> >
> > As the only parameters passed to setAnchor (in this
> > case) are
> > right:0,bottom:0
> > one would dexpect that after changing the size, that
> > the layer would be
> > re-anchored to
> > right:0,bottom:0
> >
> > On other words, the anchors work great, until you
> > change the size of the
> > layer,
> > at which point the anchors are no longer honored..
> >
> > ----- Original Message -----
> > From: "Raymond Irving" <xw...@ya...>
> > To: "Doug Melvin" <do...@cr...>;
> > <dyn...@li...>
> > Sent: Friday, March 28, 2003 7:13 AM
> > Subject: Re: [Dynapi-Dev] anchors:
> >
> >
> > >
> > > --- Doug Melvin <do...@cr...>
> > wrote:
> > > > a point.. it seems that you must define the size
> > of
> > > > a layer before you set it's anchor,
> > > > unless you intend to set all 4 dimension in the
> > > > anchor.. can this be fixed somehow?
> > >
> > > Please send me a working example of the above and
> > I'll
> > > take a look at it.
> > >
> > > > And once the anchor is set, even if you did not
> > > > define it left (for instance) you can not resize
> > > > thelayer..
> > > >
> > > > It would be nice I I could anchor a layer to the
> > > > top+right of it's parent, but still be able to
> > > > change it's width or hight
> > > > afterwards.
> > >
> > > That should be possible with
> > > setAnchor({top:0,right:0}). You should then be
> > able to
> > > change the width and height without any problem at
> > > all. If you can't change the width/height after
> > > setting the anchor then send me a working example
> > so I
> > > can take a look at it
> > >
> > > --
> > > Raymond Irving
> > >
> > > __________________________________________________
> > > Do you Yahoo!?
> > > Yahoo! Platinum - Watch CBS' NCAA March Madness,
> > live on your desktop!
> > > http://platinum.yahoo.com
> > >
> > >
> > >
> >
> -------------------------------------------------------
> > > This SF.net email is sponsored by:
> > > The Definitive IT and Networking Event. Be There!
> > > NetWorld+Interop Las Vegas 2003 -- Register today!
> > >
> >
> http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> > > _______________________________________________
> > > Dynapi-Dev mailing list
> > > Dyn...@li...
> > >
> >
> http://www.mail-archive.com/dyn...@li.../
> > >
> >
>
> > ATTACHMENT part 2 application/x-compressed
> name=anchor-issue.zip
>
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
> http://platinum.yahoo.com
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by:
> The Definitive IT and Networking Event. Be There!
> NetWorld+Interop Las Vegas 2003 -- Register today!
> http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> _______________________________________________
> Dynapi-Dev mailing list
> Dyn...@li...
> http://www.mail-archive.com/dyn...@li.../
>
|
|
From: Doug M. <do...@cr...> - 2003-04-01 06:09:16
Attachments:
anchor-issue.html
|
And for my next trick..
:-)
----- Original Message -----
From: "Doug Melvin" <do...@cr...>
To: <dyn...@li...>
Sent: Tuesday, April 01, 2003 1:06 AM
Subject: Re: [Dynapi-Dev] anchors:
> Beauty!!!
>
> Check out the attached example boys and girls(?)
>
> ----- Original Message -----
> From: "Raymond Irving" <xw...@ya...>
> To: <dyn...@li...>
> Sent: Sunday, March 30, 2003 9:20 AM
> Subject: Re: [Dynapi-Dev] anchors:
>
>
> >
> > I've uploaded the fix to the cvs. Please checkout the
> > files to see if it's working ok. Thanks again for the
> > example.
> >
> > --
> > Raymond Irving
> >
> > --- Doug Melvin <do...@cr...> wrote:
> > > In creating the attached example I discovered the
> > > following:
> > > The width of the button is being changed, but the
> > > anchor parameters are not
> > > being utilized after the size change.
> > >
> > > When you click the link to change to width to 1
> > > pixel you will notice that
> > > the button is set to a width of 1, but the button's
> > > left position is not
> > > changed..
> > > Meaning, that the parameter of right:0 is no longer
> > > honored
> > >
> > > You can see the same when you set the height of the
> > > layer, the layer's x
> > > potion doe snot change,
> > > therfore not honering the bottom:0 parameter.
> > >
> > > As the only parameters passed to setAnchor (in this
> > > case) are
> > > right:0,bottom:0
> > > one would dexpect that after changing the size, that
> > > the layer would be
> > > re-anchored to
> > > right:0,bottom:0
> > >
> > > On other words, the anchors work great, until you
> > > change the size of the
> > > layer,
> > > at which point the anchors are no longer honored..
> > >
> > > ----- Original Message -----
> > > From: "Raymond Irving" <xw...@ya...>
> > > To: "Doug Melvin" <do...@cr...>;
> > > <dyn...@li...>
> > > Sent: Friday, March 28, 2003 7:13 AM
> > > Subject: Re: [Dynapi-Dev] anchors:
> > >
> > >
> > > >
> > > > --- Doug Melvin <do...@cr...>
> > > wrote:
> > > > > a point.. it seems that you must define the size
> > > of
> > > > > a layer before you set it's anchor,
> > > > > unless you intend to set all 4 dimension in the
> > > > > anchor.. can this be fixed somehow?
> > > >
> > > > Please send me a working example of the above and
> > > I'll
> > > > take a look at it.
> > > >
> > > > > And once the anchor is set, even if you did not
> > > > > define it left (for instance) you can not resize
> > > > > thelayer..
> > > > >
> > > > > It would be nice I I could anchor a layer to the
> > > > > top+right of it's parent, but still be able to
> > > > > change it's width or hight
> > > > > afterwards.
> > > >
> > > > That should be possible with
> > > > setAnchor({top:0,right:0}). You should then be
> > > able to
> > > > change the width and height without any problem at
> > > > all. If you can't change the width/height after
> > > > setting the anchor then send me a working example
> > > so I
> > > > can take a look at it
> > > >
> > > > --
> > > > Raymond Irving
> > > >
> > > > __________________________________________________
> > > > Do you Yahoo!?
> > > > Yahoo! Platinum - Watch CBS' NCAA March Madness,
> > > live on your desktop!
> > > > http://platinum.yahoo.com
> > > >
> > > >
> > > >
> > >
> > -------------------------------------------------------
> > > > This SF.net email is sponsored by:
> > > > The Definitive IT and Networking Event. Be There!
> > > > NetWorld+Interop Las Vegas 2003 -- Register today!
> > > >
> > >
> > http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> > > > _______________________________________________
> > > > Dynapi-Dev mailing list
> > > > Dyn...@li...
> > > >
> > >
> > http://www.mail-archive.com/dyn...@li.../
> > > >
> > >
> >
> > > ATTACHMENT part 2 application/x-compressed
> > name=anchor-issue.zip
> >
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
> > http://platinum.yahoo.com
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by:
> > The Definitive IT and Networking Event. Be There!
> > NetWorld+Interop Las Vegas 2003 -- Register today!
> > http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> > _______________________________________________
> > Dynapi-Dev mailing list
> > Dyn...@li...
> > http://www.mail-archive.com/dyn...@li.../
> >
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: ValueWeb:
> Dedicated Hosting for just $79/mo with 500 GB of bandwidth!
> No other company gives more support or power for your dedicated server
> http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
> _______________________________________________
> Dynapi-Dev mailing list
> Dyn...@li...
> http://www.mail-archive.com/dyn...@li.../
> |
|
From: Raymond I. <xw...@ya...> - 2003-04-01 14:12:46
|
Cool. I think I'll add this to the examples section.
Agree?
--
Raymond Irving
--- Doug Melvin <do...@cr...> wrote:
> And for my next trick..
>
> :-)
>
>
> ----- Original Message -----
> From: "Doug Melvin" <do...@cr...>
> To: <dyn...@li...>
> Sent: Tuesday, April 01, 2003 1:06 AM
> Subject: Re: [Dynapi-Dev] anchors:
>
>
> > Beauty!!!
> >
> > Check out the attached example boys and girls(?)
> >
> > ----- Original Message -----
> > From: "Raymond Irving" <xw...@ya...>
> > To: <dyn...@li...>
> > Sent: Sunday, March 30, 2003 9:20 AM
> > Subject: Re: [Dynapi-Dev] anchors:
> >
> >
> > >
> > > I've uploaded the fix to the cvs. Please
> checkout the
> > > files to see if it's working ok. Thanks again
> for the
> > > example.
> > >
> > > --
> > > Raymond Irving
> > >
> > > --- Doug Melvin <do...@cr...>
> wrote:
> > > > In creating the attached example I discovered
> the
> > > > following:
> > > > The width of the button is being changed, but
> the
> > > > anchor parameters are not
> > > > being utilized after the size change.
> > > >
> > > > When you click the link to change to width to
> 1
> > > > pixel you will notice that
> > > > the button is set to a width of 1, but the
> button's
> > > > left position is not
> > > > changed..
> > > > Meaning, that the parameter of right:0 is no
> longer
> > > > honored
> > > >
> > > > You can see the same when you set the height
> of the
> > > > layer, the layer's x
> > > > potion doe snot change,
> > > > therfore not honering the bottom:0 parameter.
> > > >
> > > > As the only parameters passed to setAnchor (in
> this
> > > > case) are
> > > > right:0,bottom:0
> > > > one would dexpect that after changing the
> size, that
> > > > the layer would be
> > > > re-anchored to
> > > > right:0,bottom:0
> > > >
> > > > On other words, the anchors work great, until
> you
> > > > change the size of the
> > > > layer,
> > > > at which point the anchors are no longer
> honored..
> > > >
> > > > ----- Original Message -----
> > > > From: "Raymond Irving" <xw...@ya...>
> > > > To: "Doug Melvin"
> <do...@cr...>;
> > > > <dyn...@li...>
> > > > Sent: Friday, March 28, 2003 7:13 AM
> > > > Subject: Re: [Dynapi-Dev] anchors:
> > > >
> > > >
> > > > >
> > > > > --- Doug Melvin <do...@cr...>
> > > > wrote:
> > > > > > a point.. it seems that you must define
> the size
> > > > of
> > > > > > a layer before you set it's anchor,
> > > > > > unless you intend to set all 4 dimension
> in the
> > > > > > anchor.. can this be fixed somehow?
> > > > >
> > > > > Please send me a working example of the
> above and
> > > > I'll
> > > > > take a look at it.
> > > > >
> > > > > > And once the anchor is set, even if you
> did not
> > > > > > define it left (for instance) you can not
> resize
> > > > > > thelayer..
> > > > > >
> > > > > > It would be nice I I could anchor a layer
> to the
> > > > > > top+right of it's parent, but still be
> able to
> > > > > > change it's width or hight
> > > > > > afterwards.
> > > > >
> > > > > That should be possible with
> > > > > setAnchor({top:0,right:0}). You should then
> be
> > > > able to
> > > > > change the width and height without any
> problem at
> > > > > all. If you can't change the width/height
> after
> > > > > setting the anchor then send me a working
> example
> > > > so I
> > > > > can take a look at it
> > > > >
> > > > > --
> > > > > Raymond Irving
> > > > >
> > > > >
> __________________________________________________
> > > > > Do you Yahoo!?
> > > > > Yahoo! Platinum - Watch CBS' NCAA March
> Madness,
> > > > live on your desktop!
> > > > > http://platinum.yahoo.com
> > > > >
> > > > >
> > > > >
> > > >
> > >
>
-------------------------------------------------------
> > > > > This SF.net email is sponsored by:
> > > > > The Definitive IT and Networking Event. Be
> There!
> > > > > NetWorld+Interop Las Vegas 2003 -- Register
> today!
> > > > >
> > > >
> > >
>
http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> > > > >
> _______________________________________________
> > > > > Dynapi-Dev mailing list
> > > > > Dyn...@li...
> > > > >
> > > >
> > >
>
http://www.mail-archive.com/dyn...@li.../
> > > > >
> > > >
> > >
> > > > ATTACHMENT part 2 application/x-compressed
> > > name=anchor-issue.zip
> > >
> > >
> > >
> > >
> __________________________________________________
> > > Do you Yahoo!?
> > > Yahoo! Platinum - Watch CBS' NCAA March Madness,
> live on your desktop!
> > > http://platinum.yahoo.com
> > >
> > >
> > >
>
-------------------------------------------------------
> > > This SF.net email is sponsored by:
> > > The Definitive IT and Networking Event. Be
> There!
> > > NetWorld+Interop Las Vegas 2003 -- Register
> today!
> > >
>
http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> > > _______________________________________________
> > > Dynapi-Dev mailing list
> > > Dyn...@li...
> > >
>
http://www.mail-archive.com/dyn...@li.../
> > >
> >
> >
> >
>
-------------------------------------------------------
> > This SF.net email is sponsored by: ValueWeb:
> > Dedicated Hosting for just $79/mo with 500 GB of
> bandwidth!
> > No other company gives more support or power for
> your dedicated server
>
=== message truncated ===
---------------------------------
DynAPI - DynLayer
Create/Remove/Deletedynapi.library.setPath('./src/');dynapi.library.include('dynapi.api');
var parentLayer = dynapi.document.addChild(new
DynLayer(null,10,10,50,50,'#999999')); var greenLayer
= parentLayer.addChild(new
DynLayer(null,0,0,8,8,'green'));
greenLayer.setAnchor({right:0,bottom:0}); var redLayer
= parentLayer.addChild(new
DynLayer(null,0,0,8,8,'red'));
redLayer.setAnchor({top:0,left:0}); var blueLayer =
parentLayer.addChild(new
DynLayer(null,0,0,8,8,'blue'));
blueLayer.setAnchor({top:0,right:0}); var yellowLayer
= parentLayer.addChild(new
DynLayer(null,0,0,8,8,'yellow'));
yellowLayer.setAnchor({bottom:0,left:0});dynapi.document.addChild(parentLayer);
Green Layer
set the green layer's width to 16
set the green layer's width to 8
set the green layer's width to 1
set the green layer's height to 16
set the green layer's height to 8
set the green layer's height to 1 Red Layer
set the red layer's width to 16
set the red layer's width to 8
set the red layer's width to 1
set the red layer's height to 16
set the red layer's height to 8
set the red layer's height to 1 Blue
Layer
set the blue layer's width to 16
set the blue layer's width to 8
set the blue layer's width to 1
set the blue layer's height to 16
set the blue layer's height to 8
set the blue layer's height to 1 Yellow Layer
set the yellow layer's width to 16
set the yellow layer's width to 8
set the yellow layer's width to 1
set the yellow layer's height to 16
set the yellow layer's height to 8
set the yellow layer's height to 1
dynapi.document.insertAllChildren();
__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://platinum.yahoo.com
|
|
From: Doug M. <do...@cr...> - 2003-04-01 17:57:16
|
Agree.
:-)
----- Original Message -----
From: "Raymond Irving" <xw...@ya...>
To: <dyn...@li...>
Sent: Tuesday, April 01, 2003 9:12 AM
Subject: Re: [Dynapi-Dev] anchors:
>
> Cool. I think I'll add this to the examples section.
> Agree?
>
> --
> Raymond Irving
>
> --- Doug Melvin <do...@cr...> wrote:
> > And for my next trick..
> >
> > :-)
> >
> >
> > ----- Original Message -----
> > From: "Doug Melvin" <do...@cr...>
> > To: <dyn...@li...>
> > Sent: Tuesday, April 01, 2003 1:06 AM
> > Subject: Re: [Dynapi-Dev] anchors:
> >
> >
> > > Beauty!!!
> > >
> > > Check out the attached example boys and girls(?)
> > >
> > > ----- Original Message -----
> > > From: "Raymond Irving" <xw...@ya...>
> > > To: <dyn...@li...>
> > > Sent: Sunday, March 30, 2003 9:20 AM
> > > Subject: Re: [Dynapi-Dev] anchors:
> > >
> > >
> > > >
> > > > I've uploaded the fix to the cvs. Please
> > checkout the
> > > > files to see if it's working ok. Thanks again
> > for the
> > > > example.
> > > >
> > > > --
> > > > Raymond Irving
> > > >
> > > > --- Doug Melvin <do...@cr...>
> > wrote:
> > > > > In creating the attached example I discovered
> > the
> > > > > following:
> > > > > The width of the button is being changed, but
> > the
> > > > > anchor parameters are not
> > > > > being utilized after the size change.
> > > > >
> > > > > When you click the link to change to width to
> > 1
> > > > > pixel you will notice that
> > > > > the button is set to a width of 1, but the
> > button's
> > > > > left position is not
> > > > > changed..
> > > > > Meaning, that the parameter of right:0 is no
> > longer
> > > > > honored
> > > > >
> > > > > You can see the same when you set the height
> > of the
> > > > > layer, the layer's x
> > > > > potion doe snot change,
> > > > > therfore not honering the bottom:0 parameter.
> > > > >
> > > > > As the only parameters passed to setAnchor (in
> > this
> > > > > case) are
> > > > > right:0,bottom:0
> > > > > one would dexpect that after changing the
> > size, that
> > > > > the layer would be
> > > > > re-anchored to
> > > > > right:0,bottom:0
> > > > >
> > > > > On other words, the anchors work great, until
> > you
> > > > > change the size of the
> > > > > layer,
> > > > > at which point the anchors are no longer
> > honored..
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Raymond Irving" <xw...@ya...>
> > > > > To: "Doug Melvin"
> > <do...@cr...>;
> > > > > <dyn...@li...>
> > > > > Sent: Friday, March 28, 2003 7:13 AM
> > > > > Subject: Re: [Dynapi-Dev] anchors:
> > > > >
> > > > >
> > > > > >
> > > > > > --- Doug Melvin <do...@cr...>
> > > > > wrote:
> > > > > > > a point.. it seems that you must define
> > the size
> > > > > of
> > > > > > > a layer before you set it's anchor,
> > > > > > > unless you intend to set all 4 dimension
> > in the
> > > > > > > anchor.. can this be fixed somehow?
> > > > > >
> > > > > > Please send me a working example of the
> > above and
> > > > > I'll
> > > > > > take a look at it.
> > > > > >
> > > > > > > And once the anchor is set, even if you
> > did not
> > > > > > > define it left (for instance) you can not
> > resize
> > > > > > > thelayer..
> > > > > > >
> > > > > > > It would be nice I I could anchor a layer
> > to the
> > > > > > > top+right of it's parent, but still be
> > able to
> > > > > > > change it's width or hight
> > > > > > > afterwards.
> > > > > >
> > > > > > That should be possible with
> > > > > > setAnchor({top:0,right:0}). You should then
> > be
> > > > > able to
> > > > > > change the width and height without any
> > problem at
> > > > > > all. If you can't change the width/height
> > after
> > > > > > setting the anchor then send me a working
> > example
> > > > > so I
> > > > > > can take a look at it
> > > > > >
> > > > > > --
> > > > > > Raymond Irving
> > > > > >
> > > > > >
> > __________________________________________________
> > > > > > Do you Yahoo!?
> > > > > > Yahoo! Platinum - Watch CBS' NCAA March
> > Madness,
> > > > > live on your desktop!
> > > > > > http://platinum.yahoo.com
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> >
> -------------------------------------------------------
> > > > > > This SF.net email is sponsored by:
> > > > > > The Definitive IT and Networking Event. Be
> > There!
> > > > > > NetWorld+Interop Las Vegas 2003 -- Register
> > today!
> > > > > >
> > > > >
> > > >
> >
> http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> > > > > >
> > _______________________________________________
> > > > > > Dynapi-Dev mailing list
> > > > > > Dyn...@li...
> > > > > >
> > > > >
> > > >
> >
> http://www.mail-archive.com/dyn...@li.../
> > > > > >
> > > > >
> > > >
> > > > > ATTACHMENT part 2 application/x-compressed
> > > > name=anchor-issue.zip
> > > >
> > > >
> > > >
> > > >
> > __________________________________________________
> > > > Do you Yahoo!?
> > > > Yahoo! Platinum - Watch CBS' NCAA March Madness,
> > live on your desktop!
> > > > http://platinum.yahoo.com
> > > >
> > > >
> > > >
> >
> -------------------------------------------------------
> > > > This SF.net email is sponsored by:
> > > > The Definitive IT and Networking Event. Be
> > There!
> > > > NetWorld+Interop Las Vegas 2003 -- Register
> > today!
> > > >
> >
> http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en
> > > > _______________________________________________
> > > > Dynapi-Dev mailing list
> > > > Dyn...@li...
> > > >
> >
> http://www.mail-archive.com/dyn...@li.../
> > > >
> > >
> > >
> > >
> >
> -------------------------------------------------------
> > > This SF.net email is sponsored by: ValueWeb:
> > > Dedicated Hosting for just $79/mo with 500 GB of
> > bandwidth!
> > > No other company gives more support or power for
> > your dedicated server
> >
> === message truncated ===
> ---------------------------------
> DynAPI - DynLayer
>
Create/Remove/Deletedynapi.library.setPath('./src/');dynapi.library.include(
'dynapi.api');
> var parentLayer = dynapi.document.addChild(new
> DynLayer(null,10,10,50,50,'#999999')); var greenLayer
> = parentLayer.addChild(new
> DynLayer(null,0,0,8,8,'green'));
> greenLayer.setAnchor({right:0,bottom:0}); var redLayer
> = parentLayer.addChild(new
> DynLayer(null,0,0,8,8,'red'));
> redLayer.setAnchor({top:0,left:0}); var blueLayer =
> parentLayer.addChild(new
> DynLayer(null,0,0,8,8,'blue'));
> blueLayer.setAnchor({top:0,right:0}); var yellowLayer
> = parentLayer.addChild(new
> DynLayer(null,0,0,8,8,'yellow'));
>
yellowLayer.setAnchor({bottom:0,left:0});dynapi.document.addChild(parentLaye
r);
>
> Green Layer
> set the green layer's width to 16
> set the green layer's width to 8
> set the green layer's width to 1
> set the green layer's height to 16
> set the green layer's height to 8
> set the green layer's height to 1 Red Layer
> set the red layer's width to 16
> set the red layer's width to 8
> set the red layer's width to 1
> set the red layer's height to 16
> set the red layer's height to 8
> set the red layer's height to 1 Blue
> Layer
> set the blue layer's width to 16
> set the blue layer's width to 8
> set the blue layer's width to 1
> set the blue layer's height to 16
> set the blue layer's height to 8
> set the blue layer's height to 1 Yellow Layer
>
> set the yellow layer's width to 16
> set the yellow layer's width to 8
> set the yellow layer's width to 1
> set the yellow layer's height to 16
> set the yellow layer's height to 8
> set the yellow layer's height to 1
>
>
>
>
>
>
> dynapi.document.insertAllChildren();
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Tax Center - File online, calculators, forms, and more
> http://platinum.yahoo.com
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: ValueWeb:
> Dedicated Hosting for just $79/mo with 500 GB of bandwidth!
> No other company gives more support or power for your dedicated server
> http://click.atdmt.com/AFF/go/sdnxxaff00300020aff/direct/01/
> _______________________________________________
> Dynapi-Dev mailing list
> Dyn...@li...
> http://www.mail-archive.com/dyn...@li.../
>
|
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X