Hi all, I'm using this program along with my Simraceway SRW-S1 wheel on Project Cars 2 in order to get rid of the steering dead zone issue. It has succeeded in doing so, but I have a separate problem. Neither the program nor the game is recognizing the brake axis (the left lower paddle on this wheel). All other axes (including the throttle/right lower paddle which is assigned to S0) and buttons work. Any way to get the program to recognize this axis? Any help is appreciated. Thanks!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
Anonymous
-
2020-06-25
Hi,
You don't use a pedal for braking? Cause if you brake using a paddle on the wheel I don't see why it isn't detected since it should be the same device. Try to do a log and see which axes and buttons are detected (check the readme for instructions - in short: file log and level 2 if I'm not mistaken, before launching the game),. Any doubt upload the log somewhere or post it and I'll try to see what can be the problem.
Cheers,
Dwayne
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi Dwayne, it seems the issue resolved itself after some messing around, the left lower paddle was eventually recognized as RZ. I use this particular wheel since I am disabled and can't use foot pedals. Everything seems to be working fine now and without that annoying steering dead zone. Thanks for the great program!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi all, I'm using this program along with my Simraceway SRW-S1 wheel on Project Cars 2 in order to get rid of the steering dead zone issue. It has succeeded in doing so, but I have a separate problem. Neither the program nor the game is recognizing the brake axis (the left lower paddle on this wheel). All other axes (including the throttle/right lower paddle which is assigned to S0) and buttons work. Any way to get the program to recognize this axis? Any help is appreciated. Thanks!
Hi,
You don't use a pedal for braking? Cause if you brake using a paddle on the wheel I don't see why it isn't detected since it should be the same device. Try to do a log and see which axes and buttons are detected (check the readme for instructions - in short: file log and level 2 if I'm not mistaken, before launching the game),. Any doubt upload the log somewhere or post it and I'll try to see what can be the problem.
Cheers,
Dwayne
Hi Dwayne, it seems the issue resolved itself after some messing around, the left lower paddle was eventually recognized as RZ. I use this particular wheel since I am disabled and can't use foot pedals. Everything seems to be working fine now and without that annoying steering dead zone. Thanks for the great program!