Re: [dwsim-users] Shortcut Distillation: DWSIM 3 vs DWSIM 4
Simulate chemical processes using advanced thermodynamic models
Brought to you by:
danwbr
|
From: Hector P. <hpe...@gm...> - 2016-07-29 14:56:17
|
Thanks Daniel. I'll be looking forward to the releases. I was trying to do it with ChemSep, but had some convergence issues with the column. I'll see if I can get one or the other to converge and use that one. Thank you. Hector D. Perez On Fri, Jul 29, 2016 at 9:40 AM, Daniel Wagner <dan...@gm...> wrote: > This is after applying the same fix to DWSIM 3: > > [image: Imagem inline 1] > > A final v3.7 build will be released together with DWSIM v4.0 with some > critical bug fixes for those who prefer v3. They can be installed > side-by-side on the same machine. > > Regards > Daniel > > 2016-07-29 10:36 GMT-04:00 Daniel Wagner <dan...@gm...>: > >> Hi Hector, >> >> The IO Flash algorithm was enhanced in DWSIM 4. There are a few >> additional checks to ensure convergence. In DWSIM 3 it is converging >> earlier than expected for your case. >> >> And you're still struggling with this system in DWSIM. You really should >> use ChemSep's column and thermo models through the CAPE-OPEN interface. >> >> Daniel >> >> 2016-07-29 10:08 GMT-04:00 Hector Perez <hpe...@gm...>: >> >>> Hi Daniel, >>> >>> I have set up shortcut distillations for a Sulfuric Acid - Nitric Acid - >>> Water system. However, I am getting very different results depending on >>> which version of DWSIM I use. I have checked that my settings are the same >>> in both simulations (NRTL constants and Inside-Out VLE flash algorithm). >>> DWSIM 3 predicts 21 minimum stages, whereas DWSIM 4 predicts only 3 stages. >>> I am running with a issue in DWSIM 3: it is not predicting the actual >>> number of stages (only predicts the minimum number) or the optimal feed >>> stage. Both of these values show NaN. >>> >>> I would appreciate any insight here. >>> >>> I still haven't gotten the rigorous columns to converge on these >>> simulations. If you have any tips here, I'd appreciate them. >>> >>> I have attached 2 files, the first one (D3) is the DWSIM 3 file and the >>> second one is the DWSIM 4 file. >>> >>> Thank you for your time, >>> >>> Hector D. Perez >>> >> >> > |