Please see the attached DWSIM file where I am calculating the outlet pressure by setting the calculation mode other than Outlet Pressure. The outlet pressure is getting calculated correctly as it can be seen in the material stream connected to outlet port of the pump but it's not getting updated under Outlet Pressure property. Pressure Increase gets updated correctly. As an example, I have done it with performance curve calculation mode.
Hello Daniel,
Please see the attached DWSIM file where I am calculating the outlet pressure by setting the calculation mode other than Outlet Pressure. The outlet pressure is getting calculated correctly as it can be seen in the material stream connected to outlet port of the pump but it's not getting updated under Outlet Pressure property. Pressure Increase gets updated correctly. As an example, I have done it with performance curve calculation mode.
Thanks
Priyam
Thank you Priyam, it was fixed in https://github.com/DanWBR/dwsim/commit/1b69d7643aaad380f25ac6646cd686d2e396f01a
Thank you Daniel. Will wait for the release to see the changes in DWSIM.