I am currently trying to follow the instructions in the manual to create a substation (see image). I click on "create PCElement" then on the substation. The manual says a form should appear, but nothing happens when I do it. I would really appreciate some help with this problem.
Thanks a lot for this, using the Beta version has helped! I have been following the Youtube video you sent and when I highlight my load and source (I pick different colours for each of them), nothing really happens (images attached). I have run the simulation and confirmed that there is a source and load. Please can you advice me on what I might be doing wrong?
Sure, after selecting the color remember to activate the icon (it should look light green instead of dark green), that will display the element you want.
Best regards
Davis
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I am currently trying to follow the instructions in the manual to create a substation (see image). I click on "create PCElement" then on the substation. The manual says a form should appear, but nothing happens when I do it. I would really appreciate some help with this problem.
Hello,
Check this video, it will guide you through the whole process:
https://www.youtube.com/watch?v=6WZp1tugsUc
The video was made using OpenDSS-G v3, if you don't have it, you can download the beta version from here:
https://sourceforge.net/projects/dssimpc/files/Installer/OpenDSSG_V30151B.exe/download
Best regards
Davis
Hi Davis,
Thanks a lot for this, using the Beta version has helped! I have been following the Youtube video you sent and when I highlight my load and source (I pick different colours for each of them), nothing really happens (images attached). I have run the simulation and confirmed that there is a source and load. Please can you advice me on what I might be doing wrong?
Thanks,
Ishanki.
Hello,
Sure, after selecting the color remember to activate the icon (it should look light green instead of dark green), that will display the element you want.
Best regards
Davis