Hello everyone,
I am new to DSSim-PC. I have special interest in harmonic study.
I needed to make a harmonic test for case 2 "Test System for Harmonics Modeling and Simulation" with DSSim-PC, more precisely, "A 13-Bus Unbalanced Utility Distribution System". (One of the link for this file is: https://www.calvin.edu/~pribeiro/IEEE/ieee_cd/chapters/pdffiles/c10pdf.pdf)
The last two pages describe the data for this study.
One of the questions I have is, for example, for the load in Node No. 46 (last page), which describes 20% fluorescent, 20 %ASD, 20% others, (I think the remaining 40% are linear...), and another table with the current spectra of harmonic loads for each of these situations. How can I set all these things in DSSim-PC?
My apologies for my ignorance, but I'm starting now in DSSim-PC.
Thank you all!
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
The IEEE 13 Bus system is delivered when you install DSSim-PC, the installer will create a folder called test systes, there you will find the system. The only additional procedure will be to link the spectrums to the loads you need. To see how to install DSSim-PC go to:
Hello everyone,
I am new to DSSim-PC. I have special interest in harmonic study.
I needed to make a harmonic test for case 2 "Test System for Harmonics Modeling and Simulation" with DSSim-PC, more precisely, "A 13-Bus Unbalanced Utility Distribution System". (One of the link for this file is: https://www.calvin.edu/~pribeiro/IEEE/ieee_cd/chapters/pdffiles/c10pdf.pdf)
The last two pages describe the data for this study.
One of the questions I have is, for example, for the load in Node No. 46 (last page), which describes 20% fluorescent, 20 %ASD, 20% others, (I think the remaining 40% are linear...), and another table with the current spectra of harmonic loads for each of these situations. How can I set all these things in DSSim-PC?
My apologies for my ignorance, but I'm starting now in DSSim-PC.
Thank you all!
Hi,
Yes you can do this by using the harmonics editor available in this version of DSSim-PC. To see how to work with harmonics studies check this video:
https://sourceforge.net/projects/dssimpc/files/Tutorials/Harmonics_and_Freq_Sweep.mp4/download
The IEEE 13 Bus system is delivered when you install DSSim-PC, the installer will create a folder called test systes, there you will find the system. The only additional procedure will be to link the spectrums to the loads you need. To see how to install DSSim-PC go to:
https://sourceforge.net/projects/dssimpc/files/Tutorials/How_to_Install_DSSim-PC.mp4/download
Best regards
Davis
Dear Davis,
Thank you for your clarification!
Best regards