Sounds like the installer is corrupted, can you please try to download it again and try. If it doesn't work please let me know so we can figure it out.
best regards
Davis
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Good evening, I downloaded the new version of OpenDSS-G, the installation went well, but when I tried to open the IEEE 123 bus test feeder, a message showed up that does not let me open the file.
This issue is because we have removed the Administrator privilegies request from OpenDSS-G due to some limitations in other users' corporative laptops. There are 2 ways to solve this issue:
1.ExecuteOpenDSS-Gasadministrator,justrightclickontheOpenDSS-Giconandselect"Run as Administrator"fromthepop-upmenu.2.CopythetestfeedersfolderfromtheOpenDSS-Gfoldertoanotherlocation,likethe"Documents"folder.
Please let me know how it works
Best regards
Davis
Last edit: Davis Montenegro 2019-02-22
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Yes, that problem was solved in version 2.4 (the current version is 2.5). Please download the latest version using this website. That should solve the issue.
Best regards
Davis
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I'm sorry it doesn't work for you, however, since you are the only user reporting this issue I think it may be something at your end. Can you elaborate about the issue please?
Best regards
Davis
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I tried to install the program with Volume>Setup file, it throws error:
"Fatal Error. Unable to load a resource DLL"
Hi,
Sounds like the installer is corrupted, can you please try to download it again and try. If it doesn't work please let me know so we can figure it out.
best regards
Davis
Hello Davis,
I downloaded again and it is still not working. Throws the same error.
I don't know if it is just me!
Thanks,
Puneet
Hi,
The problem is because the database is not installed, the ODBC is not instlled or the fbclient.dll library wasn't selected when installing the DB. The solution to this problem is in:
https://sourceforge.net/p/electricdss/discussion/beginners/thread/18fb81d3/?limit=25#759e
Please let me know how it works.
Best regards
Davis
After installation on a Windows 10 PC I get the attached error when I try to start the app.
Hi,
The problem is because the database is not installed, the ODBC is not instlled or the fbclient.dll library wasn't selected when installing the DB. The solution to this problem is in:
https://sourceforge.net/p/electricdss/discussion/beginners/thread/18fb81d3/?limit=25#759e
Please let me know how it works.
Best regards
Davis
Hi Davis,
I got the same error as Kobus, after instalation.
Hi,
The problem is because the database is not installed, the ODBC is not instlled or the fbclient.dll library wasn't selected when installing the DB. The solution to this problem is in:
https://sourceforge.net/p/electricdss/discussion/beginners/thread/18fb81d3/?limit=25#759e
Please let me know how it works.
Best regards
Davis
Hi,
The problem is because the database is not installed, the ODBC is not instlled or the fbclient.dll library wasn't selected when installing the DB. The solution to this problem is in:
https://sourceforge.net/p/electricdss/discussion/beginners/thread/18fb81d3/?limit=25#759e
Please let me know how it works.
Best regards
Davis
Last edit: Francisco Coelho 2018-11-08
Good evening, I downloaded the new version of OpenDSS-G, the installation went well, but when I tried to open the IEEE 123 bus test feeder, a message showed up that does not let me open the file.
Hi Valeria,
This issue is because we have removed the Administrator privilegies request from OpenDSS-G due to some limitations in other users' corporative laptops. There are 2 ways to solve this issue:
Please let me know how it works
Best regards
Davis
Last edit: Davis Montenegro 2019-02-22
Hello Davis:
I have that problem, I change the address of the folder and load again as "run administrator", and follow the same error.
The best thing is, you send me the version 2.30 ZIP, to my email, please:
xfesketx@gmail.com
Hi Fernando,
Yes, that problem was solved in version 2.4 (the current version is 2.5). Please download the latest version using this website. That should solve the issue.
Best regards
Davis
I Copied the test feeders folder from the OpenDSS-G folder to another location
I install and reinstall, any way the updated version 2.5, and it show the same ERROR.
There is no solution!
Fernando,
I'm sorry it doesn't work for you, however, since you are the only user reporting this issue I think it may be something at your end. Can you elaborate about the issue please?
Best regards
Davis