From: Carl B. <afn...@af...> - 2002-01-12 15:52:17
|
jo...@cr... wrote: >What northbridge chipset does your motherboard use? > >On Fri, 11 Jan 2002, Carl Busjahn wrote: > This is not a Athlon system, so it's a socket7 chipset. I really don't know what the northbridge is on this motherboard, but here's my /proc/pci: PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 4). Master Capable. Latency=16. Prefetchable 32 bit memory at 0xe8000000 [0xebffffff]. Bus 0, device 1, function 0: PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] ( rev 0). Master Capable. No bursts. Min Gnt=12. Bus 0, device 7, function 0: ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 71). Bus 0, device 7, function 1: IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 6). Master Capable. Latency=64. I/O at 0xe000 [0xe00f]. Bus 0, device 7, function 2: USB Controller: VIA Technologies, Inc. UHCI USB (rev 2). IRQ 11. Master Capable. Latency=64. I/O at 0xe400 [0xe41f]. Bus 0, device 7, function 3: Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 16). Bus 0, device 17, function 0: Ethernet controller: PCI device 1516:0803 (MYSON Technology Inc) (rev 0). IRQ 10. Master Capable. Latency=64. Min Gnt=32.Max Lat=64. I/O at 0xe800 [0xe8ff]. Non-prefetchable 32 bit memory at 0xef000000 [0xef0003ff]. Bus 1, device 0, function 0: VGA compatible controller: ATI Technologies Inc Radeon QD (rev 0). Master Capable. Latency=64. Min Gnt=8. Prefetchable 32 bit memory at 0xe0000000 [0xe7ffffff]. I/O at 0xd000 [0xd0ff]. Non-prefetchable 32 bit memory at 0xed000000 [0xed07ffff]. > > >>I just recently got a Radeon "QD" (7200), (it's $58 on newegg.com...) >>and it's in DRI mode. I get good frame rates, (About 160fps in a >>1024x768 window with pulsar -fps). >>The problem is, it locks up somewhat unpredictably. The magic sysrq >>will sync, unmount, and reboot my machine fine, and the cursor still >>moves. I know that the card is in agp 1x mode, and I'd like to bump it >>up to 2x in xf86config, and I'd like some help in debugging the setup, >>to see what's going wrong. Just as a side note, the 2d accelleration, >>and mpeg accelleration are fine. >> >>Carl Busjahn >> >> >> >> >>_______________________________________________ >>Dri-devel mailing list >>Dri...@li... >>https://lists.sourceforge.net/lists/listinfo/dri-devel >> > |