Menu
▾
▴
Re: [Dri-users] Help for i915
|
From: <Ago...@os...> - 2006-03-21 09:13:29
|
Hi, thanks for your help. As you said (and I wrote in my second email) my FC 4 comes with xorg-x11-6.8.2-31. I have tried to install the xorg-x11-drv but it needs glibc-2.4, which are in FC 5. Today I tried to install Xorg-7.0, but when I made ./configure it answered that it needs 'lbxutil', which I haven't. Alltogether it seems to me that is not possible to run i915 without update everything to FC 5, so probably the best thing to do is download FC 5 and reinstall everything! What I forgot to say yesterday is that before installing DRI I was able to run X at 1024x768 16 bit, while after installing DRI I was no more able to see any X interface... >:( Sigh! So, can someone help me to disinstall DRI? Finally, here follows part of my /var/log/Xorg.0.log: X Window System Version 6.8.2 Release Date: 9 February 2005 X Protocol Version 11, Revision 0, Release 6.8.2 Build Operating System: Linux 2.4.21-27.0.2.ELsmp i686 [ELF] Current Operating System: Linux localhost.localdomain 2.6.15 #1 Fri Mar 17 12:32:12 CET 2006 i686 Build Date: 13 May 2005 Build Host: decompose.build.redhat.com Before reporting problems, check http://wiki.X.Org to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.6.15 (ro...@lo...) (gcc version 4.0.0 20050519 (Red Hat 4.0.0-8)) #1 Fri Mar 17 12:32:12 CET 2006 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 21 08:50:39 2006 (==) Using config file: "/root/xorg.conf" (==) ServerLayout "single head configuration" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Synaptics" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: X.Org ANSI C Emulation: 0.2 X.Org Video Driver: 0.7 X.Org XInput driver : 0.4 X.Org Server Extension : 0.2 X.Org Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="X.Org Foundation" compiled for 6.8.2, module version = 1.0.0 ABI class: X.Org Video Driver, version 0.7 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2590 card 1631,c014 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:02:0: chip 8086,2592 card 1631,c014 rev 04 class 03,00,00 hdr 80 (II) PCI: 00:02:1: chip 8086,2792 card 1631,c014 rev 04 class 03,80,00 hdr 80 (II) PCI: 00:1b:0: chip 8086,2668 card 1631,c014 rev 04 class 04,03,00 hdr 00 (II) PCI: 00:1d:0: chip 8086,2658 card 1631,c014 rev 04 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,2659 card 1631,c014 rev 04 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,265a card 1631,c014 rev 04 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,265c card 1631,c014 rev 04 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev d4 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,2641 card 1631,c014 rev 04 class 06,01,00 hdr 80 (II) PCI: 00:1f:2: chip 8086,2653 card 1631,c014 rev 04 class 01,01,80 hdr 00 (II) PCI: 00:1f:3: chip 8086,266a card 1631,c014 rev 04 class 0c,05,00 hdr 00 (II) PCI: 01:02:0: chip 104c,8031 card c400,0000 rev 00 class 06,07,00 hdr 82 (II) PCI: 01:02:2: chip 104c,8032 card 1631,c014 rev 00 class 0c,00,10 hdr 80 (II) PCI: 01:02:3: chip 104c,8033 card 1631,c014 rev 00 class 01,80,00 hdr 80 (II) PCI: 01:02:4: chip 104c,8034 card 1631,c014 rev 00 class 08,05,00 hdr 80 (II) PCI: 01:04:0: chip 10ec,8139 card 1631,c014 rev 10 class 02,00,00 hdr 00 (II) PCI: 01:05:0: chip 8086,4220 card 8086,2701 rev 05 class 02,80,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:30:0), (0,1,2), BCTRL: 0x0006 (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0x0000c000 - 0x0000c0ff (0x100) IX[B] [1] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B] [2] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] [3] -1 0 0x0000cc00 - 0x0000ccff (0x100) IX[B] [4] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B] [5] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B] [6] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B] [7] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0x90000000 - 0x9fffffff (0x10000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge: (II) Bus 2: bridge is at (1:2:0), (1,2,5), BCTRL: 0x05c0 (VGA_EN is cleared) (II) Bus 2 I/O range: [0] -1 0 0x0000c400 - 0x0000c4ff (0x100) IX[B] [1] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B] (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xc2000000 - 0xc3ffffff (0x2000000) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0x90000000 - 0x91ffffff (0x2000000) MX[B] (--) PCI:*(0:2:0) Intel Corp. unknown chipset (0x2592) rev 4, Mem @ 0xd0000000/19, 0xa0000000/28, 0xd0080000/18, I/O @ 0xe000/3 (--) PCI: (0:2:1) Intel Corp. unknown chipset (0x2792) rev 4, Mem @ 0xd0100000/19 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] ... (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) VESA(0): initializing int10 (WW) VESA(0): Bad V_BIOS checksum (II) VESA(0): Primary V_BIOS segment is: 0xc000 (II) VESA(0): VESA BIOS detected (II) VESA(0): VESA VBE Version 3.0 (II) VESA(0): VESA VBE Total Mem: 7872 kB (II) VESA(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS (II) VESA(0): VESA VBE OEM Software Rev: 1.0 (II) VESA(0): VESA VBE OEM Vendor: Intel Corporation (II) VESA(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controller (II) VESA(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) VESA(0): Splitting WC range: base: 0xa0000000, size: 0x7b0000 (II) VESA(0): Splitting WC range: base: 0xa0400000, size: 0x3b0000 (II) VESA(0): Splitting WC range: base: 0xa0600000, size: 0x1b0000 (II) VESA(0): Splitting WC range: base: 0xa0700000, size: 0xb0000 (II) VESA(0): Splitting WC range: base: 0xa0780000, size: 0x30000 (==) VESA(0): Write-combining range (0xa07a0000,0x10000) (==) VESA(0): Write-combining range (0xa0780000,0x30000) (==) VESA(0): Write-combining range (0xa0700000,0xb0000) (==) VESA(0): Write-combining range (0xa0600000,0x1b0000) (==) VESA(0): Write-combining range (0xa0400000,0x3b0000) (==) VESA(0): Write-combining range (0xa0000000,0x7b0000) (II) VESA(0): virtual address = 0xb7705000, physical address = 0xa0000000, size = 8060928 Required symbol shadowUpdatePlanar4x8Weak from module /usr/X11R6/lib/modules/drivers/vesa_drv.o is unresolved! Required symbol shadowUpdatePackedWeak from module /usr/X11R6/lib/modules/drivers/vesa_drv.o is unresolved! Required symbol shadowUpdatePlanar4Weak from module /usr/X11R6/lib/modules/drivers/vesa_drv.o is unresolved! Required symbol shadowInit from module /usr/X11R6/lib/modules/drivers/vesa_drv.o is unresolved! Required symbol shadowUpdatePackedWeak from module /usr/X11R6/lib/modules/drivers/vesa_drv.o is unresolved! Required symbol shadowAlloc from module /usr/X11R6/lib/modules/drivers/vesa_drv.o is unresolved! Fatal server error: Some required symbols were unresolved Felix Kühling wrote: > > Am Montag, den 20.03.2006, 17:53 +0100 schrieb > Ago...@os...: > > Hi, > > I installed a Fedora Core 4 on a new Packard Bell R-2125 notebook, > > but I can't drive the Intel-915 chip. > > I can reach 1024x768 16bit with generic monitor (or PB P&P 2025) and > > VESA graphics, but I would like to have the 1280x800 32 bit that I > > can see in WinXP. > > > > I have recompiled the kernel to 2.6.15 and, after that, I have tried > > to do that: > > > > * Download from http://dri.freedesktop.org/snapshots/ these file: > > * > > http://dri.freedesktop.org/snapshots/common-20060319-linux.i386.tar.bz2 > > * http://dri.freedesktop.org/snapshots/i915-20060319-linux.i386.tar.bz2 > > * http://dri.freedesktop.org/snapshots/i810-20060319-linux.i386.tar.bz2 > > If you have an i915 card you don't need the i810 snapshot. But it > shouldn't hurt either. > > > * Untar all from the same location and run the ./install.sh script in > > each > > of the 3 subdirs. > > * In my xorg.conf: change 'vesa' to 'i810' but I still can't drive > > the i915. > > > > Is there anything else I have to do to install DRI? > > Is there any other setting which I hate to write in my old xorg.conf? > > What exactly is the problem you are seeing? Can can > attach /var/log/Xorg.0.log? > > Are you aware that the binary snapshots require Xorg 6.9 or later? AFAIK > FC4 comes with Xorg 6.8.2. Please read > http://dri.freedesktop.org/wiki/Download#head-ecc2e81644411c145ce0e78cbb89b8a6daaf2f40. > > Regards, > Felix > > > > > Many thanks in advance! > > > > Tino > > > > -- > | Felix Kühling <fx...@gm...> http://fxk.de.vu | > | PGP Fingerprint: 6A3C 9566 5B30 DDED 73C3 B152 151C 5CC1 D888 E595 | > > ------------------------------------------------------- > This SF.Net email is sponsored by xPML, a groundbreaking scripting language > that extends applications into web and mobile media. Attend the live webcast > and join the prime developer group breaking into this new coding territory! > http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642 > -- > _______________________________________________ > Dri-users mailing list > Dri...@li... > https://lists.sourceforge.net/lists/listinfo/dri-users |
