From: Alimin B. O. <al...@ih...> - 2003-11-15 14:45:52
|
After upgrading to the latest radeon driver snapshot, I have trouble getting direct rendering with my Radeon Mobility 7500. Checking the modules loaded, agpgart which is supposed to be loaded, isn't loaded at all. Doing lsmod gives me: [alimin@compaq alimin]$ lsmod Module Size Used by Not tainted soundcore 6404 0 (autoclean) radeon 88856 0 parport_pc 19044 1 (autoclean) lp 8996 0 (autoclean) parport 37056 1 (autoclean) [parport_pc lp] autofs 13364 0 (autoclean) (unused) nfs 83640 1 (autoclean) lockd 60304 1 (autoclean) [nfs] sunrpc 84796 1 (autoclean) [nfs lockd] e100 56068 1 sg 36716 0 (autoclean) sr_mod 18232 0 (autoclean) microcode 4668 0 (autoclean) ide-scsi 12144 0 scsi_mod 108500 3 [sg sr_mod ide-scsi] ide-cd 35616 0 cdrom 33696 0 [sr_mod ide-cd] ohci1394 29160 0 (unused) ieee1394 65636 0 [ohci1394] nls_iso8859-1 3516 1 (autoclean) nls_cp437 5116 1 (autoclean) vfat 13068 1 (autoclean) fat 38840 0 (autoclean) [vfat] keybdev 2944 0 (unused) mousedev 5556 1 hid 24676 0 (unused) input 5760 0 [keybdev mousedev hid] ehci-hcd 20232 0 (unused) usb-ohci 21684 0 (unused) usbcore 78560 1 [hid ehci-hcd usb-ohci] ext3 70820 2 jbd 52212 2 [ext3] I have tried rmmod radeon, then modprobe agpgart and modprobe radeon again and restart X and I get direct rendering that way. But everytime I reboot the machine, agpgart will not be loaded at the start. Error from dmesg | tail gives: [alimin@compaq alimin]$ dmesg | tail Hardware receive checksums enabled ip_tables: (C) 2000-2002 Netfilter core team e100: eth0 NIC Link is Up 100 Mbps Full duplex parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). lp0: console ready [drm] Initialized radeon 1.1.1 20010405 on minor 0 [drm:radeon_unlock] *ERROR* Process 4494 using kernel context 0 How do I set radeon to be dependent on agpgart and therefore be loaded at the same time at every reboot? Alimin |