# File generated by xf86config.

#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining
a
# copy of this software and associated documentation files (the
"Software"),
# to deal in the Software without restriction, including without
limitation
# the rights to use, copy, modify, merge, publish, distribute,
sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be
included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT
SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT
OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project
shall
# not be used in advertising or otherwise to promote the sale, use or
other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA
extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"

# This loads the GLX module
# Load "glx"

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated
together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or
other
# programs take long to start up, try moving the Type1 and Speedo
directory
# to the end of this list (or comment them out).
#

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "ca"
Option "XkbOptions" "caps:shift,altwin:meta_alt"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "imps/2"
Option "Device" "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"

Identifier "Monitor0"

# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync 30 - 70

# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-160

EndSection


# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# BusID "PCI:1:0:1"
# The chipset line is optional in most cases. It can be used to
override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this
section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# Device configured by xf86config:

Section "Device"
Identifier "Voodoo3 (generic)"
Driver "tdfx"
BusID "PCI:1:0:0"
# IOBase "0xc000/8"
#VideoRam 65536
# Insert Clocks lines here if appropriate
EndSection

#Section "Device"
# Identifier "Voodoo5 (generic)"
# Driver "tdfx"
# BusID "PCI:1:0:1"
#EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen
section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "Voodoo3 (generic)"
Monitor "Monitor0"
DefaultDepth 16

Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "640x480" "800x600" "1024x768"
# ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Simple Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.

Screen "Screen 1"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section "DRI"
Mode 0666
EndSection

***********************

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.9-13smp i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Jun 26 19:10:08 2002
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Voodoo3 (generic)"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "ca"
(**) XKB: layout: "ca"
(**) Option "XkbOptions" "caps:shift,altwin:meta_alt"
(**) XKB: options: "caps:shift,altwin:meta_alt"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000060, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev c4 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00
hdr 01
(II) PCI: 00:07:0: chip 1106,0596 card 1106,0000 rev 23 class 06,01,00
hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a
hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 11 class 0c,03,00
hdr 00
(II) PCI: 00:07:3: chip 1106,3050 card 0000,0000 rev 30 class 06,00,00
hdr 00
(II) PCI: 00:10:0: chip 1102,0002 card 1102,8027 rev 08 class 00,01,00
hdr 80
(II) PCI: 00:10:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00
hdr 80
(II) PCI: 00:11:0: chip 10ec,8029 card 1186,0300 rev 00 class 02,00,00
hdr 00
(II) PCI: 00:12:0: chip 10d9,0531 card 0000,0000 rev 25 class 02,00,00
hdr 00
(II) PCI: 01:00:0: chip 121a,0009 card 121a,0002 rev 01 class 03,00,00
hdr 00
(II) PCI: 01:00:1: chip 121a,0009 card 121a,0002 rev 01 class 03,00,00
hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[1] -1 0x0000c400 - 0x0000c4ff (0x100) IX[B]
[2] -1 0x0000c800 - 0x0000c8ff (0x100) IX[B]
[3] -1 0x0000cc00 - 0x0000ccff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus -1: bridge is at (0:7:3), (-1,-1,0), BCTRL: 0x08 (VGA_EN is
set)
(II) Bus -1 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(!!) More than one primary device found
(--) PCI: (0:16:0) Creative Labs unknown chipset (0x0002) rev 8, I/O @
0xd800/5
(--) PCI: (1:0:0) 3dfx Interactive Voodoo5 rev 1, Mem @ 0xd0000000/26,
0xd8000000/27, I/O @ 0xc000/8
(--) PCI: (1:0:1) 3dfx Interactive Voodoo5 rev 1, I/O @ 0xfffffe00/8
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xe3000000 - 0xe30000ff (0x100) MX[B]
[1] -1 0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
[2] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[3] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
[4] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[5] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[6] -1 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[7] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[8] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
[9] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[10] -1 0x0000d800 - 0x0000d81f (0x20) IX[B](B)
(II) Inactive PCI resource ranges:
[0] -1 0xfffffe00 - 0xfffffeff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xe3000000 - 0xe30000ff (0x100) MX[B]
[1] -1 0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
[2] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[3] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
[4] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[5] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[6] -1 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[7] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[8] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
[9] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[10] -1 0x0000d800 - 0x0000d81f (0x20) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0xfffffe00 - 0xfffffeff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe3000000 - 0xe30000ff (0x100) MX[B]
[6] -1 0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
[7] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[8] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[12] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[13] -1 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[14] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[15] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
[16] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[17] -1 0x0000d800 - 0x0000d81f (0x20) IX[B](B)
[18] -1 0xfffffe00 - 0xfffffeff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "tdfx"
(II) Loading /usr/X11R6/lib/modules/drivers/tdfx_drv.o
(II) Module tdfx: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee,
3dfx Voodoo3, 3dfx Voodoo5
(II) Primary Device is:
(WW) TDFX: No matching Device section for instance (BusID PCI:1:0:1)
found
(--) Chipset 3dfx Voodoo5 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe3000000 - 0xe30000ff (0x100) MX[B]
[6] -1 0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
[7] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[8] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[12] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[13] -1 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[14] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[15] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
[16] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[17] -1 0x0000d800 - 0x0000d81f (0x20) IX[B](B)
[18] -1 0xfffffe00 - 0xfffffeff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xe3000000 - 0xe30000ff (0x100) MX[B]
[6] -1 0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
[7] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[8] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
[9] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[15] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[16] -1 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[17] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[18] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
[19] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[20] -1 0x0000d800 - 0x0000d81f (0x20) IX[B](B)
[21] -1 0xfffffe00 - 0xfffffeff (0x100) IX[B](B)
[22] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[23] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) TDFX(0): Softbooting the board (through the int10 interface).
(II) Truncating PCI BIOS Length to 40960
(II) TDFX(0): Softbooting the board succeeded.
(II) TDFX(0): TDFXFindChips: found 2 chip(s)
(**) TDFX(0): Depth 16, (--) framebuffer bpp 16
(==) TDFX(0): RGB weight 565
(==) TDFX(0): Default visual is TrueColor
(--) TDFX(0): Chipset: "3dfx Voodoo5"
(--) TDFX(0): Linear framebuffer at 0xD8000000
(--) TDFX(0): MMIO registers at addr 0xD0000000
(--) TDFX(0): PIO registers at addr 0xC000
(II) TDFX(0): DRAMINIT1 read 0x40240031, programming 0x40202031 (not
Banshee)
(II) TDFX(0): TDFXInitChips: numchips = 1
(II) TDFX(0): TDFXInitChips: cfgbits = 0x00000045, initbits = 0x00000301
(II) TDFX(0): TDFXInitChips: mem0base = 0xd0000000, mem1base =
0xd8000008
(II) TDFX(0): TDFXInitChips: mem0size = 0x02000000, mem1size =
0x04000000
(II) TDFX(0): TDFXInitChips: mem0bits = 0x00000005, mem1bits =
0x00000040
(II) TDFX(0): TDFXInitChips: cfgbits = 0x00000045
(II) TDFX(0): TDFXInitChips: MMIOAddr[0] = 0xd0000000
(II) TDFX(0): TDFXInitChips: LinearAddr[0] = 0xd8000008
(--) TDFX(0): VideoRAM: 32768 kByte Mapping 65536 kByte
(==) TDFX(0): Using gamma correction (1.0, 1.0, 1.0)
(II) TDFX(0): Monitor0: Using hsync range of 30.00-70.00 kHz
(II) TDFX(0): Monitor0: Using vrefresh range of 50.00-160.00 Hz
(II) TDFX(0): Clock range: 12.00 to 350.00 MHz
(II) TDFX(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) TDFX(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) TDFX(0): Not using default mode "1280x960" (hsync out of range)
(II) TDFX(0): Not using default mode "640x480" (hsync out of range)
(II) TDFX(0): Not using default mode "1280x1024" (hsync out of range)
(II) TDFX(0): Not using default mode "640x512" (hsync out of range)
(II) TDFX(0): Not using default mode "1280x1024" (hsync out of range)
(II) TDFX(0): Not using default mode "640x512" (hsync out of range)
(II) TDFX(0): Not using default mode "1600x1200" (hsync out of range)
(II) TDFX(0): Not using default mode "800x600" (hsync out of range)
(II) TDFX(0): Not using default mode "1600x1200" (hsync out of range)
(II) TDFX(0): Not using default mode "800x600" (hsync out of range)
(II) TDFX(0): Not using default mode "1600x1200" (hsync out of range)
(II) TDFX(0): Not using default mode "800x600" (hsync out of range)
(II) TDFX(0): Not using default mode "1600x1200" (hsync out of range)
(II) TDFX(0): Not using default mode "800x600" (hsync out of range)
(II) TDFX(0): Not using default mode "1600x1200" (hsync out of range)
(II) TDFX(0): Not using default mode "800x600" (hsync out of range)
(II) TDFX(0): Not using default mode "1792x1344" (hsync out of range)
(II) TDFX(0): Not using default mode "896x672" (hsync out of range)
(II) TDFX(0): Not using default mode "1792x1344" (hsync out of range)
(II) TDFX(0): Not using default mode "896x672" (hsync out of range)
(II) TDFX(0): Not using default mode "1856x1392" (hsync out of range)
(II) TDFX(0): Not using default mode "928x696" (hsync out of range)
(II) TDFX(0): Not using default mode "1856x1392" (hsync out of range)
(II) TDFX(0): Not using default mode "928x696" (hsync out of range)
(II) TDFX(0): Not using default mode "1920x1440" (hsync out of range)
(II) TDFX(0): Not using default mode "960x720" (hsync out of range)
(II) TDFX(0): Not using default mode "1920x1440" (hsync out of range)
(II) TDFX(0): Not using default mode "960x720" (hsync out of range)
(II) TDFX(0): Not using default mode "1400x1050" (unknown reason)
(II) TDFX(0): Not using default mode "700x525" (hsync out of range)
(--) TDFX(0): Virtual size is 1280x1024 (pitch 1280)
(**) TDFX(0): Default mode "1280x1024": 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) TDFX(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024
1025 1028 1066 +hsync +vsync
(**) TDFX(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(II) TDFX(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484
509 -hsync -vsync
(**) TDFX(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) TDFX(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
631 +hsync +vsync
(**) TDFX(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) TDFX(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
772 808 +hsync +vsync
(==) TDFX(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(**) TDFX(0): ShowCache Disabled
(**) TDFX(0): video key default 0x1e
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.2.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) TDFX(0): initializing int10
(II) Truncating PCI BIOS Length to 40960
(II) TDFX(0): VESA BIOS detected
(II) TDFX(0): VESA VBE Version 3.0
(II) TDFX(0): VESA VBE Total Mem: 16384 kB
(II) TDFX(0): VESA VBE OEM: 3dfx Interactive, Inc.
(II) TDFX(0): VESA VBE OEM Software Rev: 1.0
(II) TDFX(0): VESA VBE OEM Vendor: 3dfx Interactive, Inc.
(II) TDFX(0): VESA VBE OEM Product: Voodoo5 5500
(II) TDFX(0): VESA VBE OEM Product Rev: Version 1.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) TDFX(0): VESA VBE DDC supported
(II) TDFX(0): VESA VBE DDC Level 2
(II) TDFX(0): VESA VBE DDC transfer in appr. 8 sec.
(II) TDFX(0): VESA VBE DDC read successfully
(II) TDFX(0): Manufacturer: SAM Model: 1057 Serial#: 1146368311
(II) TDFX(0): Year: 2000 Week: 35
(II) TDFX(0): EDID Version: 1.1
(II) TDFX(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) TDFX(0): Sync: Separate
(II) TDFX(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) TDFX(0): Gamma: 2.26
(II) TDFX(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) TDFX(0): redX: 0.645 redY: 0.321 greenX: 0.285 greenY: 0.600
(II) TDFX(0): blueX: 0.142 blueY: 0.057 whiteX: 0.283 whiteY: 0.298
(II) TDFX(0): Supported VESA Video Modes:
(II) TDFX(0): 720x400@70Hz
(II) TDFX(0): 720x400@88Hz
(II) TDFX(0): 640x480@60Hz
(II) TDFX(0): 640x480@67Hz
(II) TDFX(0): 640x480@72Hz
(II) TDFX(0): 640x480@75Hz
(II) TDFX(0): 800x600@56Hz
(II) TDFX(0): 800x600@60Hz
(II) TDFX(0): 800x600@72Hz
(II) TDFX(0): 800x600@75Hz
(II) TDFX(0): 832x624@75Hz
(II) TDFX(0): 1024x768@87Hz (interlaced)
(II) TDFX(0): 1024x768@60Hz
(II) TDFX(0): 1024x768@70Hz
(II) TDFX(0): 1024x768@75Hz
(II) TDFX(0): Manufacturer's mask: 0
(II) TDFX(0): Supported Future Video Modes:
(II) TDFX(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) TDFX(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) TDFX(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) TDFX(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) TDFX(0): Supported additional Video Mode:
(II) TDFX(0): clock: 56.2 MHz Image Size: 306 x 230 mm
(II) TDFX(0): h_active: 800 h_sync: 832 h_sync_end 896 h_blank_end
1048 h_border: 0
(II) TDFX(0): v_active: 600 v_sync: 601 v_sync_end 604 v_blanking: 631
v_border: 0
(II) TDFX(0): Supported additional Video Mode:
(II) TDFX(0): clock: 94.5 MHz Image Size: 306 x 230 mm
(II) TDFX(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end
1376 h_border: 0
(II) TDFX(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808
v_border: 0
(II) TDFX(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 70
kHz, PixClock max 110 MHz
(II) TDFX(0): Serial No: HCEN850675
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
[1] 0 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0xe3000000 - 0xe30000ff (0x100) MX[B]
[8] -1 0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
[9] -1 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[10] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
[11] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[12] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[13] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[14] 0 0x0000c000 - 0x0000c0ff (0x100) IX[B]
[15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[18] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[19] -1 0x0000dc00 - 0x0000dc07 (0x8) IX[B]
[20] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[21] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
[22] -1 0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
[23] -1 0x0000d800 - 0x0000d81f (0x20) IX[B](B)
[24] -1 0xfffffe00 - 0xfffffeff (0x100) IX[B](B)
[25] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprD)
[26] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprD)
(==) TDFX(0): Write-combining range (0xd8000000,0x4000000)
(II) TDFX(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is
0xbd00
(II) TDFX(0): Changing back offset from 0x01aff000 to 0x01afe000
(II) TDFX(0): Textures Memory 23.58 MB
(II) TDFX(0): Cursor Offset: [0x00000000,0x00001000)
(II) TDFX(0): Fifo Offset: [0x00001000, 0x00041000)
(II) TDFX(0): Front Buffer Offset: [0x00041000, 0x00369C00)
(II) TDFX(0): Texture Offset: [0x00369C00, 0x01AFE000)
(II) TDFX(0): BackOffset: [0x01AFE000, 0x01D7E000)
(II) TDFX(0): DepthOffset: [0x01D7F000, 0x01FFF000)
(II) TDFX(0): Minimum 270, Maximum 3071 lines of offscreen memory
available
(II) TDFX(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Offscreen Pixmaps
Driver provided NonTEGlyphRenderer replacement
Setting up tile and stipple cache:
32 128x128 slots
21 256x256 slots
7 512x512 slots
(==) TDFX(0): Backing store disabled
(==) TDFX(0): Silken mouse enabled
(==) TDFX(0): Direct rendering disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "imps/2"
(**) Mouse1: Protocol: "imps/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/mouse"
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Couldn't load XKB keymap, falling back to pre-XKB keymap
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/,
removing from list!