I:
1:Environment: Two machine with OS XP installed and a router
2:Removed DR.COM by click remove.exe in the installastion folder.The DR.COM is green version,You Can upack the use,version code:3.46(D13). The reboot machine.
3: Changed IP of the sever machine as following , The machine with a MAC address binded to my broradband account by ISP
IP:192.168.0.2,subnet mask:255.255.255.0, gateway:192.168.0.1 ,DNS :221.10.50.246 (Viewed through code:ipconfig /all when online by DR.COM)
Reboot the machine after the ip was set.
4:Clints machine IP is as following:
IP:192.168.0.3,subnet mast:255.255.255.0, gateway:192.168.0.1 ,DNS ::221.10.50.246
Reboot the machine after the ip was set.
5:Router:Wan:Static:10.7.32.32 (Viewed through code:ipconfig /all when online by DR.COM)
subnetmask:255.255.255.0,gateway:10.7.32.1(Viewed through code:ipconfig /all
when online by DR.COM),DNS:221.10.50.246
LAN:192.168.0.1,subnetmask:255.255.255.0
MAC:Cloned to the Mac of the sever Mac.
DHCP:not used,address pool:192.168.0.100----192.168.0.199
DMZ:192.168.0.2
6:Upack open dr.com package and Click Login_client.exe to install the protocol,then reboot
and then click the Login_client.exe again with host machine mode,The login windows
shows:Login failed,then Login sucess,received some uncogonised data.
II: Here come the problems:
1: Net page can be opened in the server, while in the client machine,Login
successfully with client mode,And it shared with the sever IP:192.168.0.2, But the
net page can't
be opened in the client machine ,while Kaspersky can update it's virus base
through internet.
2:If the server reboot, the net page can't be opened,but IM QQ can get on the
internet. The same to the client machine.
3:Then I need to pull out the internetwire then plugin the server machine and restore
the IP ,then Run Dr.com again to open net page.The server machine can't connect to
internet if the internetwire still in the router
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Method 1:
1. Using the Open Dr.COM 0.23 login to the server at every client once.
2. Change the DNS Server to the local AREA DNS Server
Method 2:
1. Export the Registry from the Open Dr.COM Client Running in Server Mode ：
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinSock2\CrackDrcom\route
2. Import the registery content in every Open Dr.COM Client Running in Client Mode.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I:
1:Environment: Two machine with OS XP installed and a router
2:Removed DR.COM by click remove.exe in the installastion folder.The DR.COM is green version,You Can upack the use,version code:3.46(D13). The reboot machine.
3: Changed IP of the sever machine as following , The machine with a MAC address binded to my broradband account by ISP
IP:192.168.0.2,subnet mask:255.255.255.0, gateway:192.168.0.1 ,DNS :221.10.50.246 (Viewed through code:ipconfig /all when online by DR.COM)
Reboot the machine after the ip was set.
4:Clints machine IP is as following:
IP:192.168.0.3,subnet mast:255.255.255.0, gateway:192.168.0.1 ,DNS ::221.10.50.246
Reboot the machine after the ip was set.
5:Router:Wan:Static:10.7.32.32 (Viewed through code:ipconfig /all when online by DR.COM)
subnetmask:255.255.255.0,gateway:10.7.32.1(Viewed through code:ipconfig /all
when online by DR.COM),DNS:221.10.50.246
LAN:192.168.0.1,subnetmask:255.255.255.0
MAC:Cloned to the Mac of the sever Mac.
DHCP:not used,address pool:192.168.0.100----192.168.0.199
DMZ:192.168.0.2
6:Upack open dr.com package and Click Login_client.exe to install the protocol,then reboot
and then click the Login_client.exe again with host machine mode,The login windows
shows:Login failed,then Login sucess,received some uncogonised data.
II: Here come the problems:
1: Net page can be opened in the server, while in the client machine,Login
successfully with client mode,And it shared with the sever IP:192.168.0.2, But the
net page can't
be opened in the client machine ,while Kaspersky can update it's virus base
through internet.
2:If the server reboot, the net page can't be opened,but IM QQ can get on the
internet. The same to the client machine.
3:Then I need to pull out the internetwire then plugin the server machine and restore
the IP ,then Run Dr.com again to open net page.The server machine can't connect to
internet if the internetwire still in the router
Well,Today,Net page can't be opened in server machine,but can be opened in client machine
In Client machine,Connection lasted 30 minutes,then disconnect again.
After open port being monitored by firewall,Open drcom work well
The problem can be solved by the following steps:
Method 1:
1. Using the Open Dr.COM 0.23 login to the server at every client once.
2. Change the DNS Server to the local AREA DNS Server
Method 2:
1. Export the Registry from the Open Dr.COM Client Running in Server Mode ：
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\WinSock2\CrackDrcom\route
2. Import the registery content in every Open Dr.COM Client Running in Client Mode.
Well,it depends.(以下仅以静态ip为例)
1.请确信你的ISP供应商的dr.com以及其安装时附带的win pcap捉包程序已经卸载好;
2.重启你的电脑
3.ipv4协议中填写正确(按tp-link为例)
ip:192.168.x.(2-254)
(tp-link中的x为1,腾达的为0,阿尔法的也不同,视乎路由器默认设置)
subnet mask:255.255.255.0
gateway:192.168.x.1
(x定义与ip中的一致)
DNS请填写ISP供应商给你的
4.Router WAN
ip ISP供应商提供给你的
subnet mask:255.255.255.0
DNS请填写ISP供应商给你的,其余的请保留默认
5.Router cloned the sever(报网机)Mac
6.Router shut down DHCP
7.Router DMZ填写报网机设置的ip(step3)
8.reset your Router
9.看了你上述的设置之后才发现你似乎已经设置正确..其余步骤忽略..
------------------------------------------------------------
请尝试关闭你的防火墙,开放80,8080,8000,443端口试试(kaspersky上成功)
如果你是使用瑞星的(2009),开放以上端口后,防火墙中请关闭恶意网址拦截这
一组件
------------------------------------------------------------
*如需变换主副机,需要做主机的请于网卡属性-高级中的Network Address中填写报
网机的Mac,需要变成副机的请将报网机Mac的最后一位更改成不同于主机的0-9数字
然后填入
然后在drcom-client中改变交换一次你的主副机设置,填好相关ISP提供的信息,正
确的sever ip即可..
如果还是不能交换主副机的请连同ip一齐更改,重复step*
remember to reset your Router...