I use clonezilla live serveur edition on usb flash drive and on a partition on my laptop mount by grub.
When i try to clone a partition of 65 Go of my HP 650 G2, from another pc, Clonzilla start the clone normally and stop it with this error message: /home/partimag is full ! Nospace left on device...
But i have 1.8T free on my HD.
I tried:
stable releases
drbl-live-xfce-2.4.6-7-amd64
drbl-live-xfce-2.4.5-35-amd64 (don't recognize network card of client)
testing releases
drbl-live-xfce-2.4.6-18-amd64
drbl-live-xfce-2.4.6-12-amd64
drbl-live-xfce-2.4.6-5-amd64 (don't recognize network card of client)
A idea ?
Thank for your interest.
Sorry for my english
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
When i run in terminal : drbl-all-service start
return is
Now start the service: isc-dhcp-server portmap rpcbind nis rpc-statd nfs-common nfs-kernel-server nfs-server tftpd-hpa drbl-clients-nat
Job for isc-dhcp-server.service failed because the control process exited with error code.
See "systemctl status isc-dhcp-server.service" and "journalctl -xe" for details.
XXXXXXX XXXXXXX XXXXXXX
Failed to start service isc-dhcp-server !!!
Now stop 'rpcbind' service in systemd-like environment...
Warning: Stopping rpcbind.service, but it can still be activated by:
rpcbind.socket
Now start 'rpcbind' service in systemd-like environment...
Now stop 'rpcbind' service in systemd-like environment...
Warning: Stopping rpcbind.service, but it can still be activated by:
rpcbind.socket
Now start 'rpcbind' service in systemd-like environment...
Now stop 'rpc-statd' service in systemd-like environment...
Now start 'rpc-statd' service in systemd-like environment...
Now stop 'null' service in systemd-like environment...
Failed to stop null.service: Unit null.service not loaded.
Now start 'null' service in systemd-like environment...
Failed to start null.service: Unit null.service not found.
XXXXXXX XXXXXXX XXXXXXX
Failed to start service nfs-common !!!
Now stop 'nfs-server' service in systemd-like environment...
Now start 'nfs-server' service in systemd-like environment...
Now stop 'nfs-server' service in systemd-like environment...
Now start 'nfs-server' service in systemd-like environment...
Now stop 'drbl-clients-nat' service in systemd-like environment...
Now start 'drbl-clients-nat' service in systemd-like environment...
ip_forward is already on.
But the clone start and fails with message : Nospace left on device
Need some help...
Thank
Last edit: jimble 2016-10-07
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
This disk usage looks normal to me. No idea why there is such issue there...
OK, when client shows that error message, please enter command line prompt, and run this command on the client:
df -h
then post the results.
Steven
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I am having the same problem. Tried local disk, nfs, samba, and ssh. The PXE clonezilla isn't mounting the remote storage facility, it's using /home/partimage local disk.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I still can not clone an image or restore HP ProBook 650 G2.
drbl-live-xfce-2.4.7-7-amd64 start correctly on the server and client load properly on the laptop HP ProBook 650 G2.
But there is always an error message about mounting / home / partimag
I really do not see where this can come from, an idea?
Do you have 2nd DHCP server in the LAN?
192.168.1.100 looks like not your DRBL server...
If so, please try to isolate your LAN environment from the 2nd DHCP server.
Steven
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
DRBL Clonezilla Server asks for an IP address. Choose Static, and set it to 192.168.100.253 255.255.255.0 and gateway 192.168.100.253. These settings worked for me. I was getting the space message. Notice when the Live disk is booting just as it changes video mode the ocs_prerun happens. mount -t nfs 192.168.100.253:/home/partimag /home/partimag if this fails you will receive the out of space error.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Are you trying to backup /dev/sda1 to FreeNAS using sshfs ??
According to side FreeNas - error,
there are error about 'sshd[5729]: _secure_path: /nonexistent/.login_conf'.
and side CloneZilla live Ubuntu - error shows "Software caused connection abort". It looks like FreeNAS ssh disconnect ... so Clonezillla fail to store split backup files to FreeNAS.
Jazz
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
What in now, il it is I use side ssh connection of cloneZilla to my FreeNas. The name "fs" of "sshfs", don't no.
During the start process, I enter location of destination of backup for all partition of my disque of divice what i will backup. User and passwoard was accepted, and during the process of backup hi faild. yes, It is of process of spliting the problem. That is not of the first split, but after some other split. Problem during process of split ? How resolve ?
It's hard to tell why it disconnect.
Maybe there are sshd "timeout" option in FreeNAS.
Maybe there are some network limitation between your server and FreeNAS.
I think with your indication, i found that the shear UNIX on my FreeNas was false. I add it because it was not indicated... And now it work better. Thant's for your indications.
All good at you.
Last edit: Hess 2017-09-09
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I use clonezilla live serveur edition on usb flash drive and on a partition on my laptop mount by grub.
When i try to clone a partition of 65 Go of my HP 650 G2, from another pc, Clonzilla start the clone normally and stop it with this error message: /home/partimag is full ! Nospace left on device...
But i have 1.8T free on my HD.
I tried:
stable releases
drbl-live-xfce-2.4.6-7-amd64
drbl-live-xfce-2.4.5-35-amd64 (don't recognize network card of client)
testing releases
drbl-live-xfce-2.4.6-18-amd64
drbl-live-xfce-2.4.6-12-amd64
drbl-live-xfce-2.4.6-5-amd64 (don't recognize network card of client)
A idea ?
Thank for your interest.
Sorry for my english
Where did you mount the image repository? Please run
df -ah
on DRBL live server then post it.
Thanks.
Steven
Hello,
df -ah :
http://zupimages.net/viewer.php?id=16/39/kwd3.jpg
http://zupimages.net/viewer.php?id=16/39/xe64.jpg
error message :
http://zupimages.net/viewer.php?id=16/39/5tm6.jpg
Thank
Hello,
I have installed a drbl srv on my latop and i had the same result
message: No space left on device...
device mount on /home/drbltop/data
root@L530:/home/drbltop# df -ah
Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur
sysfs 0 0 0 - /sys
proc 0 0 0 - /proc
udev 1,8G 0 1,8G 0% /dev
devpts 0 0 0 - /dev/pts
tmpfs 357M 10M 347M 3% /run
/dev/sda3 30G 15G 13G 54% /
securityfs 0 0 0 - /sys/kernel/security
tmpfs 1,8G 68K 1,8G 1% /dev/shm
tmpfs 5,0M 4,0K 5,0M 1% /run/lock
tmpfs 1,8G 0 1,8G 0% /sys/fs/cgroup
cgroup 0 0 0 - /sys/fs/cgroup/systemd
pstore 0 0 0 - /sys/fs/pstore
cgroup 0 0 0 - /sys/fs/cgroup/memory
cgroup 0 0 0 - /sys/fs/cgroup/cpu,cpuacct
cgroup 0 0 0 - /sys/fs/cgroup/perf_event
cgroup 0 0 0 - /sys/fs/cgroup/net_cls,net_prio
cgroup 0 0 0 - /sys/fs/cgroup/blkio
cgroup 0 0 0 - /sys/fs/cgroup/pids
cgroup 0 0 0 - /sys/fs/cgroup/freezer
cgroup 0 0 0 - /sys/fs/cgroup/devices
cgroup 0 0 0 - /sys/fs/cgroup/cpuset
systemd-1 0 0 0 - /proc/sys/fs/binfmt_misc
debugfs 0 0 0 - /sys/kernel/debug
hugetlbfs 0 0 0 - /dev/hugepages
mqueue 0 0 0 - /dev/mqueue
sunrpc 0 0 0 - /run/rpc_pipefs
nfsd 0 0 0 - /proc/fs/nfsd
/dev/sda8 822G 281G 500G 36% /home/drbltop/data
tmpfs 357M 4,0K 357M 1% /run/user/109
tmpfs 357M 12K 357M 1% /run/user/1000
When i run in terminal : drbl-all-service start
return is
Now start the service: isc-dhcp-server portmap rpcbind nis rpc-statd nfs-common nfs-kernel-server nfs-server tftpd-hpa drbl-clients-nat
Job for isc-dhcp-server.service failed because the control process exited with error code.
See "systemctl status isc-dhcp-server.service" and "journalctl -xe" for details.
XXXXXXX XXXXXXX XXXXXXX
Failed to start service isc-dhcp-server !!!
Now stop 'rpcbind' service in systemd-like environment...
Warning: Stopping rpcbind.service, but it can still be activated by:
rpcbind.socket
Now start 'rpcbind' service in systemd-like environment...
Now stop 'rpcbind' service in systemd-like environment...
Warning: Stopping rpcbind.service, but it can still be activated by:
rpcbind.socket
Now start 'rpcbind' service in systemd-like environment...
Now stop 'rpc-statd' service in systemd-like environment...
Now start 'rpc-statd' service in systemd-like environment...
Now stop 'null' service in systemd-like environment...
Failed to stop null.service: Unit null.service not loaded.
Now start 'null' service in systemd-like environment...
Failed to start null.service: Unit null.service not found.
XXXXXXX XXXXXXX XXXXXXX
Failed to start service nfs-common !!!
Now stop 'nfs-server' service in systemd-like environment...
Now start 'nfs-server' service in systemd-like environment...
Now stop 'nfs-server' service in systemd-like environment...
Now start 'nfs-server' service in systemd-like environment...
Now stop 'drbl-clients-nat' service in systemd-like environment...
Now start 'drbl-clients-nat' service in systemd-like environment...
ip_forward is already on.
But the clone start and fails with message : Nospace left on device
Need some help...
Thank
Last edit: jimble 2016-10-07
This disk usage looks normal to me. No idea why there is such issue there...
OK, when client shows that error message, please enter command line prompt, and run this command on the client:
df -h
then post the results.
Steven
I am having the same problem. Tried local disk, nfs, samba, and ssh. The PXE clonezilla isn't mounting the remote storage facility, it's using /home/partimage local disk.
Hello,
Back...
I still can not clone an image or restore HP ProBook 650 G2.
drbl-live-xfce-2.4.7-7-amd64 start correctly on the server and client load properly on the laptop HP ProBook 650 G2.
But there is always an error message about mounting / home / partimag
I really do not see where this can come from, an idea?
Thank you
server side error message and cat /var/log/clonezilla.log
http://zupimages.net/viewer.php?id=16/45/sv24.jpg
df -ah
http://zupimages.net/viewer.php?id=16/45/s12i.jpg
client side error message and cat /var/log/clonezilla.log
http://zupimages.net/viewer.php?id=16/45/827a.jpg
df -ah
http://zupimages.net/viewer.php?id=16/45/9zkv.jpg
Last edit: jimble 2016-11-14
Do you have 2nd DHCP server in the LAN?
192.168.1.100 looks like not your DRBL server...
If so, please try to isolate your LAN environment from the 2nd DHCP server.
Steven
DRBL Clonezilla Server asks for an IP address. Choose Static, and set it to 192.168.100.253 255.255.255.0 and gateway 192.168.100.253. These settings worked for me. I was getting the space message. Notice when the Live disk is booting just as it changes video mode the ocs_prerun happens. mount -t nfs 192.168.100.253:/home/partimag /home/partimag if this fails you will receive the out of space error.
I think, I have the same error side CloneZilla live Ubuntu - error
I have open an poste CloneZilla-FreeNas - connetion error - some times after your's. but whithout anwser...
Have some one a solution ?
Best regard's
Are you trying to backup /dev/sda1 to FreeNAS using sshfs ??
According to side FreeNas - error,
there are error about 'sshd[5729]: _secure_path: /nonexistent/.login_conf'.
and side CloneZilla live Ubuntu - error shows "Software caused connection abort". It looks like FreeNAS ssh disconnect ... so Clonezillla fail to store split backup files to FreeNAS.
Hello Jazz,
thank's for your help.
What in now, il it is I use side ssh connection of cloneZilla to my FreeNas. The name "fs" of "sshfs", don't no.
During the start process, I enter location of destination of backup for all partition of my disque of divice what i will backup. User and passwoard was accepted, and during the process of backup hi faild. yes, It is of process of spliting the problem. That is not of the first split, but after some other split. Problem during process of split ? How resolve ?
Best regard's
It's hard to tell why it disconnect.
Maybe there are sshd "timeout" option in FreeNAS.
Maybe there are some network limitation between your server and FreeNAS.
An alternative way is use FreeNAS NFS instead of SSH.
https://doc.freenas.org/9.3/freenas_sharing.html#unix-nfs-shares
Hello Jazz,
I think with your indication, i found that the shear UNIX on my FreeNas was false. I add it because it was not indicated... And now it work better. Thant's for your indications.
All good at you.
Last edit: Hess 2017-09-09