Thread: [Doxygen-users] Fwd: Missing "refman" tex file for PDF output generation

Brought to you by: dimitri

doxygen-users

[Doxygen-users] Fwd: Missing "refman" tex file for PDF output generation

From: Hugo B. <hbo...@gm...> - 2013-11-22 17:52:13

Hi all!

I'm trying to generate a PDF documentation of our project here.
What is going wrong is that when Latex output is generated, no "refman.tex"
file is generated.
Apparently there were no errors on doxygen log (only warnings).

This is the doxygen log: http://justpaste.it/dnt7

and after a "make pdf" command, I get the following:
c:\SIGA\trunk\docs\doxygen\latex>pdflatex refman
This is pdfTeX, Version 3.1415926-2.4-1.40.13 (MiKTeX 2.9)
entering extended mode
! I can't find file `refman'.
<*> refman

pdflatex couldn't find 'refman' because it doesn't exist. Doxygen couldn't
generate it for some mysterious reason I don't know why.

Any clues about that?

Thanks in advance,
Hugo Benício.

Re: [Doxygen-users] Missing "refman" tex file for PDF output generation

From: Hugo B. <hbo...@gm...> - 2013-11-26 19:40:25

Anyone?
I really need to generate a pdf documentation but, without any error
messages and help from here, It will be almost impossible for me,
unfortunately...

PS.: My doxy file flags relative to Latex/PDF Generation

GENERATE_LATEX         = YES
USE_PDFLATEX           = YES


On Fri, Nov 22, 2013 at 2:52 PM, Hugo Benicio <hbo...@gm...> wrote:

> Hi all!
>
> I'm trying to generate a PDF documentation of our project here.
> What is going wrong is that when Latex output is generated, no
> "refman.tex" file is generated.
> Apparently there were no errors on doxygen log (only warnings).
>
> This is the doxygen log: http://justpaste.it/dnt7
>
> and after a "make pdf" command, I get the following:
> c:\SIGA\trunk\docs\doxygen\latex>pdflatex refman
> This is pdfTeX, Version 3.1415926-2.4-1.40.13 (MiKTeX 2.9)
> entering extended mode
> ! I can't find file `refman'.
> <*> refman
>
> pdflatex couldn't find 'refman' because it doesn't exist. Doxygen couldn't
> generate it for some mysterious reason I don't know why.
>
> Any clues about that?
>
> Thanks in advance,
> Hugo Benício.
>
>

Re: [Doxygen-users] Missing "refman" tex file for PDF output generation

From: Smigielski, R. L (Robert) <Rob...@ls...> - 2013-11-26 20:09:50

I have had problems where Doxygen tool cannot generate the refman output file due to an error. I found that I could reduce the set of input files to a smaller and smaller set until it could produce the refman file and then the PDF from that. That can point you to a file that is the root of the problem. A few years ago, on two files from the same developer I had non-printable non visible characters in the *.h file that somehow broke the Doxygen build process. Once I got to the point that a single file had the problem I ran a diff on the file against the previous version(s) and eventually found the non-printable characters in the file. I deleted those and the problem was resolved.
Hope this helps.

Robert Smigielski
Network Storage Products Group
LSI Corporation
1110 American Parkway NE
Allentown Pa 18109, USA
TEL 610.712.8906
rob...@ls...<mailto:rob...@ls...>

From: Hugo Benicio [mailto:hbo...@gm...]
Sent: Tuesday, November 26, 2013 2:40 PM
To: dox...@li...
Subject: Re: [Doxygen-users] Missing "refman" tex file for PDF output generation

Anyone?
I really need to generate a pdf documentation but, without any error messages and help from here, It will be almost impossible for me, unfortunately...

PS.: My doxy file flags relative to Latex/PDF Generation

GENERATE_LATEX         = YES
USE_PDFLATEX           = YES

On Fri, Nov 22, 2013 at 2:52 PM, Hugo Benicio <hbo...@gm...<mailto:hbo...@gm...>> wrote:
Hi all!

I'm trying to generate a PDF documentation of our project here.
What is going wrong is that when Latex output is generated, no "refman.tex" file is generated.
Apparently there were no errors on doxygen log (only warnings).

This is the doxygen log: http://justpaste.it/dnt7

and after a "make pdf" command, I get the following:
c:\SIGA\trunk\docs\doxygen\latex>pdflatex refman
This is pdfTeX, Version 3.1415926-2.4-1.40.13 (MiKTeX 2.9)
entering extended mode
! I can't find file `refman'.
<*> refman

pdflatex couldn't find 'refman' because it doesn't exist. Doxygen couldn't generate it for some mysterious reason I don't know why.

Any clues about that?

Thanks in advance,
Hugo Benício.

Re: [Doxygen-users] Missing "refman" tex file for PDF output generation

From: Dimitri v. H. <do...@gm...> - 2013-11-26 20:13:15

Hi Hugo,

Doxygen should always generate a refman.tex file in the latex output directory. 
Are you using a custom layout file (non-empty LAYOUT_FILE option)?
If you can capture the behaviour you see in a small self-contained example (=source+config file in a tar or zip) then
please file a bug report for it here: https://bugzilla.gnome.org/enter_bug.cgi?product=doxygen

Regards,
  Dimitri

On 26 Nov 2013, at 20:40 , Hugo Benicio <hbo...@gm...> wrote:

> Anyone?
> I really need to generate a pdf documentation but, without any error messages and help from here, It will be almost impossible for me, unfortunately...
> 
> PS.: My doxy file flags relative to Latex/PDF Generation
> 
> GENERATE_LATEX         = YES
> USE_PDFLATEX           = YES
> 
> 
> On Fri, Nov 22, 2013 at 2:52 PM, Hugo Benicio <hbo...@gm...> wrote:
> Hi all!
> 
> I'm trying to generate a PDF documentation of our project here.
> What is going wrong is that when Latex output is generated, no "refman.tex" file is generated.
> Apparently there were no errors on doxygen log (only warnings).
> 
> This is the doxygen log: http://justpaste.it/dnt7
> 
> and after a "make pdf" command, I get the following:
> c:\SIGA\trunk\docs\doxygen\latex>pdflatex refman
> This is pdfTeX, Version 3.1415926-2.4-1.40.13 (MiKTeX 2.9)
> entering extended mode
> ! I can't find file `refman'.
> <*> refman
> 
> pdflatex couldn't find 'refman' because it doesn't exist. Doxygen couldn't generate it for some mysterious reason I don't know why.
> 
> Any clues about that?
> 
> Thanks in advance,
> Hugo Benício.
> 
> 
> ------------------------------------------------------------------------------
> Rapidly troubleshoot problems before they affect your business. Most IT 
> organizations don't have a clear picture of how application performance 
> affects their revenue. With AppDynamics, you get 100% visibility into your 
> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
> http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk_______________________________________________
> Doxygen-users mailing list
> Dox...@li...
> https://lists.sourceforge.net/lists/listinfo/doxygen-users

Re: [Doxygen-users] Missing "refman" tex file for PDF output generation

From: Hugo B. <hbo...@gm...> - 2013-11-26 20:34:23

Really thanks for all the anwsers

@Robert
Really good point. I'll take a look at it. My project is pretty large,
though. But it's worth a try, definitely.
Let's see if I find a file with non visible characters like yours.

@Wendell
I did it, but, as I said, my "make" command fails with the some errors
telling that refmain.tex is missing (it's the root latex file supposed to
be generated by doxygen).

@Dimitri
No, my layout_file flag points to nothing
LAYOUT_FILE            =
I'm trying robert's suggestion tomorrow. If I discover what is going wrong
with nice self-contained examples, I'll be glad to report it on bugzilla.
Let's see what I get then...

Thanks to all,
Hugo Benício.


On Tue, Nov 26, 2013 at 5:13 PM, Dimitri van Heesch <do...@gm...>wrote:

> Hi Hugo,
>
> Doxygen should always generate a refman.tex file in the latex output
> directory.
> Are you using a custom layout file (non-empty LAYOUT_FILE option)?
> If you can capture the behaviour you see in a small self-contained example
> (=source+config file in a tar or zip) then
> please file a bug report for it here:
> https://bugzilla.gnome.org/enter_bug.cgi?product=doxygen
>
> Regards,
>   Dimitri
>
> On 26 Nov 2013, at 20:40 , Hugo Benicio <hbo...@gm...> wrote:
>
> > Anyone?
> > I really need to generate a pdf documentation but, without any error
> messages and help from here, It will be almost impossible for me,
> unfortunately...
> >
> > PS.: My doxy file flags relative to Latex/PDF Generation
> >
> > GENERATE_LATEX         = YES
> > USE_PDFLATEX           = YES
> >
> >
> > On Fri, Nov 22, 2013 at 2:52 PM, Hugo Benicio <hbo...@gm...>
> wrote:
> > Hi all!
> >
> > I'm trying to generate a PDF documentation of our project here.
> > What is going wrong is that when Latex output is generated, no
> "refman.tex" file is generated.
> > Apparently there were no errors on doxygen log (only warnings).
> >
> > This is the doxygen log: http://justpaste.it/dnt7
> >
> > and after a "make pdf" command, I get the following:
> > c:\SIGA\trunk\docs\doxygen\latex>pdflatex refman
> > This is pdfTeX, Version 3.1415926-2.4-1.40.13 (MiKTeX 2.9)
> > entering extended mode
> > ! I can't find file `refman'.
> > <*> refman
> >
> > pdflatex couldn't find 'refman' because it doesn't exist. Doxygen
> couldn't generate it for some mysterious reason I don't know why.
> >
> > Any clues about that?
> >
> > Thanks in advance,
> > Hugo Benício.
> >
> >
> >
> ------------------------------------------------------------------------------
> > Rapidly troubleshoot problems before they affect your business. Most IT
> > organizations don't have a clear picture of how application performance
> > affects their revenue. With AppDynamics, you get 100% visibility into
> your
> > Java,.NET, & PHP application. Start your 15-day FREE TRIAL of
> AppDynamics Pro!
> >
> http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk_______________________________________________
> > Doxygen-users mailing list
> > Dox...@li...
> > https://lists.sourceforge.net/lists/listinfo/doxygen-users
>
>

Re: [Doxygen-users] Missing "refman" tex file for PDF output generation

From: <Dam...@lt...> - 2013-11-26 21:50:05

For Linux users, the 'wc' shell command will say if there are non-ASCII
characters.
- Damon

  From:       Arthur Schwarz <asc...@at...>                                                                                                 

  To:         Hugo Benicio <hbo...@gm...>, Dimitri van Heesch <do...@gm...>                                                           

  Cc:         "dox...@li... List" <dox...@li...>                                                      

  Date:       11/26/2013 04:06 PM                                                                                                                   

  Subject:    Re: [Doxygen-users] Missing "refman" tex file for PDF output	generation                                                          

If you're searching for single non-ASCII characters let me suggest that you
write a simple program to check for them. Nothing fancy, maybe something
like (in C):

#include <stdio.h>
void SimpleProgram(char* filename) {
    FILE* stdin = fopen(filename, 'r');
    int chr;
    while( chr = fgetc(stdin) ) {
        if (chr < ' ') {
            switch(chr) {
                case '\n':
                case '\t':
                case '\r':
                    break;
                default: {
                  // tsk, tsk

                }

            }

        else if (chr > '~') {
            // bad, bad boy

        }

    }

}

This is ugly code (in C or a C++ equivalent). But it's cheep to write, easy
to debug, and (I believe) will work. The checking each file is time
consuming (not that I haven't done it or won't continue to do it). But if
you have many files and searching for a known fault, a filter is probably
better.

NOTE: THIS IS NOT GOOD CODE. There are much faster and cleaner ways to
filter.

art
________________________________

Really thanks for all the anwsers

@Robert
Really good point. I'll take a look at it. My project is pretty large,
though. But it's worth a try, definitely.
Let's see if I find a file with non visible characters like yours.

@Wendell
I did it, but, as I said, my "make" command fails with the some errors
telling that refmain.tex is missing (it's the root latex file supposed to
be generated by doxygen).

@Dimitri
No, my layout_file flag points to nothing
LAYOUT_FILE            =

I'm trying robert's suggestion tomorrow. If I discover what is going wrong
with nice self-contained examples, I'll be glad to report it on bugzilla.
Let's see what I get then...

Thanks to all,
Hugo Benício.

On Tue, Nov 26, 2013 at 5:13 PM, Dimitri van Heesch <do...@gm...>
wrote:

Hi Hugo,
>
>Doxygen should always generate a refman.tex file in the latex output
directory.
>Are you using a custom layout file (non-empty LAYOUT_FILE option)?
>If you can capture the behaviour you see in a small self-contained example
(=source+config file in a tar or zip) then
>please file a bug report for it here:
https://bugzilla.gnome.org/enter_bug.cgi?product=doxygen
>
>Regards,
>  Dimitri
>
>
>On 26 Nov 2013, at 20:40 , Hugo Benicio <hbo...@gm...> wrote:
>
>> Anyone?
>> I really need to generate a pdf documentation but, without any error
messages and help from here, It will be almost impossible for me,
unfortunately...
>>
>> PS.: My doxy file flags relative to Latex/PDF Generation
>>
>> GENERATE_LATEX         = YES
>> USE_PDFLATEX           = YES
>>
>>
>> On Fri, Nov 22, 2013 at 2:52 PM, Hugo Benicio <hbo...@gm...>
wrote:
>> Hi all!
>>
>> I'm trying to generate a PDF documentation of our project here.
>> What is going wrong is that when Latex output is generated, no
"refman.tex" file is generated.
>> Apparently there were no errors on doxygen log (only warnings).
>>
>> This is the doxygen log: http://justpaste.it/dnt7
>>
>> and after a "make pdf" command, I get the following:
>> c:\SIGA\trunk\docs\doxygen\latex>pdflatex refman
>> This is pdfTeX, Version 3.1415926-2.4-1.40.13 (MiKTeX 2.9)
>> entering extended mode
>> ! I can't find file `refman'.
>> <*> refman
>>
>> pdflatex couldn't find 'refman' because it doesn't exist. Doxygen
couldn't generate it for some mysterious reason I don't know why.
>>
>> Any clues about that?
>>
>> Thanks in advance,
>> Hugo Benício.
>>
>>
>
>>
------------------------------------------------------------------------------

>> Rapidly troubleshoot problems before they affect your business. Most IT
>> organizations don't have a clear picture of how application performance
>> affects their revenue. With AppDynamics, you get 100% visibility into
your
>> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of
AppDynamics Pro!
>>
http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk_______________________________________________

>> Doxygen-users mailing list
>> Dox...@li...
>> https://lists.sourceforge.net/lists/listinfo/doxygen-users
>
>

------------------------------------------------------------------------------

Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics
Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk
_______________________________________________
Doxygen-users mailing list
Dox...@li...
https://lists.sourceforge.net/lists/listinfo/doxygen-users

------------------------------------------------------------------------------

Rapidly troubleshoot problems before they affect your business. Most IT
organizations don't have a clear picture of how application performance
affects their revenue. With AppDynamics, you get 100% visibility into your
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics
Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk
_______________________________________________
Doxygen-users mailing list
Dox...@li...
https://lists.sourceforge.net/lists/listinfo/doxygen-users

Re: [Doxygen-users] Missing "refman" tex file for PDF output generation

From: Hugo B. <hbo...@gm...> - 2013-11-27 12:12:55

Thank you all, guys.

I got it, finally! After a lot of efforts, I just realized that my doxygen
version could be a little out-dated.
I checked it and I was using version 1.8.1.2 and the latest stable release
was 1.8.5.
After reinstalling my doxygen (updating to 1.8.5) I could finally generate
my latex documentation including the famous refmain.tex :)
It was an issue that were fixed between those two versions (from 1.8.1.2 to
1.8.5) after all.

I got some minor issues about file encodings when doing a 'make pdf', but
it's something that I can work on. I think I can finally get my pdf from
here.

Thank you.
Really grateful,
Hugo Benício.


On Tue, Nov 26, 2013 at 6:33 PM, <Dam...@lt...> wrote:

> For Linux users, the 'wc' shell command will say if there are non-ASCII
> characters.
> - Damon
>
>
>
>   From:       Arthur Schwarz <asc...@at...>
>
>   To:         Hugo Benicio <hbo...@gm...>, Dimitri van Heesch <
> do...@gm...>
>
>   Cc:         "dox...@li... List" <
> dox...@li...>
>
>   Date:       11/26/2013 04:06 PM
>
>   Subject:    Re: [Doxygen-users] Missing "refman" tex file for PDF output
>      generation
>
>
>
>
>
>
>
>
> If you're searching for single non-ASCII characters let me suggest that you
> write a simple program to check for them. Nothing fancy, maybe something
> like (in C):
>
> #include <stdio.h>
> void SimpleProgram(char* filename) {
>     FILE* stdin = fopen(filename, 'r');
>     int chr;
>     while( chr = fgetc(stdin) ) {
>         if (chr < ' ') {
>             switch(chr) {
>                 case '\n':
>                 case '\t':
>                 case '\r':
>                     break;
>                 default: {
>                   // tsk, tsk
>
>                 }
>
>             }
>
>         else if (chr > '~') {
>             // bad, bad boy
>
>         }
>
>     }
>
> }
>
> This is ugly code (in C or a C++ equivalent). But it's cheep to write, easy
> to debug, and (I believe) will work. The checking each file is time
> consuming (not that I haven't done it or won't continue to do it). But if
> you have many files and searching for a known fault, a filter is probably
> better.
>
> NOTE: THIS IS NOT GOOD CODE. There are much faster and cleaner ways to
> filter.
>
>
> art
> ________________________________
>
>
>
>
> Really thanks for all the anwsers
>
> @Robert
> Really good point. I'll take a look at it. My project is pretty large,
> though. But it's worth a try, definitely.
> Let's see if I find a file with non visible characters like yours.
>
> @Wendell
> I did it, but, as I said, my "make" command fails with the some errors
> telling that refmain.tex is missing (it's the root latex file supposed to
> be generated by doxygen).
>
> @Dimitri
> No, my layout_file flag points to nothing
> LAYOUT_FILE            =
>
> I'm trying robert's suggestion tomorrow. If I discover what is going wrong
> with nice self-contained examples, I'll be glad to report it on bugzilla.
> Let's see what I get then...
>
> Thanks to all,
> Hugo Benício.
>
>
>
> On Tue, Nov 26, 2013 at 5:13 PM, Dimitri van Heesch <do...@gm...>
> wrote:
>
> Hi Hugo,
> >
> >Doxygen should always generate a refman.tex file in the latex output
> directory.
> >Are you using a custom layout file (non-empty LAYOUT_FILE option)?
> >If you can capture the behaviour you see in a small self-contained example
> (=source+config file in a tar or zip) then
> >please file a bug report for it here:
> https://bugzilla.gnome.org/enter_bug.cgi?product=doxygen
> >
> >Regards,
> >  Dimitri
> >
> >
> >On 26 Nov 2013, at 20:40 , Hugo Benicio <hbo...@gm...> wrote:
> >
> >> Anyone?
> >> I really need to generate a pdf documentation but, without any error
> messages and help from here, It will be almost impossible for me,
> unfortunately...
> >>
> >> PS.: My doxy file flags relative to Latex/PDF Generation
> >>
> >> GENERATE_LATEX         = YES
> >> USE_PDFLATEX           = YES
> >>
> >>
> >> On Fri, Nov 22, 2013 at 2:52 PM, Hugo Benicio <hbo...@gm...>
> wrote:
> >> Hi all!
> >>
> >> I'm trying to generate a PDF documentation of our project here.
> >> What is going wrong is that when Latex output is generated, no
> "refman.tex" file is generated.
> >> Apparently there were no errors on doxygen log (only warnings).
> >>
> >> This is the doxygen log: http://justpaste.it/dnt7
> >>
> >> and after a "make pdf" command, I get the following:
> >> c:\SIGA\trunk\docs\doxygen\latex>pdflatex refman
> >> This is pdfTeX, Version 3.1415926-2.4-1.40.13 (MiKTeX 2.9)
> >> entering extended mode
> >> ! I can't find file `refman'.
> >> <*> refman
> >>
> >> pdflatex couldn't find 'refman' because it doesn't exist. Doxygen
> couldn't generate it for some mysterious reason I don't know why.
> >>
> >> Any clues about that?
> >>
> >> Thanks in advance,
> >> Hugo Benício.
> >>
> >>
> >
> >>
>
> ------------------------------------------------------------------------------
>
> >> Rapidly troubleshoot problems before they affect your business. Most IT
> >> organizations don't have a clear picture of how application performance
> >> affects their revenue. With AppDynamics, you get 100% visibility into
> your
> >> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of
> AppDynamics Pro!
> >>
>
> http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk_______________________________________________
>
> >> Doxygen-users mailing list
> >> Dox...@li...
> >> https://lists.sourceforge.net/lists/listinfo/doxygen-users
> >
> >
>
>
> ------------------------------------------------------------------------------
>
> Rapidly troubleshoot problems before they affect your business. Most IT
> organizations don't have a clear picture of how application performance
> affects their revenue. With AppDynamics, you get 100% visibility into your
> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics
> Pro!
> http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk
> _______________________________________________
> Doxygen-users mailing list
> Dox...@li...
> https://lists.sourceforge.net/lists/listinfo/doxygen-users
>
>
> ------------------------------------------------------------------------------
>
> Rapidly troubleshoot problems before they affect your business. Most IT
> organizations don't have a clear picture of how application performance
> affects their revenue. With AppDynamics, you get 100% visibility into your
> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics
> Pro!
> http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk
> _______________________________________________
> Doxygen-users mailing list
> Dox...@li...
> https://lists.sourceforge.net/lists/listinfo/doxygen-users
>
>
>
>

Re: [Doxygen-users] Missing "refman" tex file for PDF output generation

From: Arthur S. <asc...@at...> - 2013-11-26 21:05:40


If you're searching for single non-ASCII characters let me suggest that you write a simple program to check for them. Nothing fancy, maybe something like (in C):

#include <stdio.h>
void SimpleProgram(char* filename) {
    FILE* stdin = fopen(filename, 'r');
    int chr;
    while( chr = fgetc(stdin) ) {
        if (chr < ' ') {
            switch(chr) {
                case '\n':
                case '\t':
                case '\r':
                    break;
                default: {
                  // tsk, tsk

                }

            }

        else if (chr > '~') {
            // bad, bad boy

        }

    }

}

This is ugly code (in C or a C++ equivalent). But it's cheep to write, easy to debug, and (I believe) will work. The checking each file is time consuming (not that I haven't done it or won't continue to do it). But if you have many files and searching for a known fault, a filter is probably better.

NOTE: THIS IS NOT GOOD CODE. There are much faster and cleaner ways to filter.


art
________________________________




Really thanks for all the anwsers

@Robert
Really good point. I'll take a look at it. My project is pretty large, though. But it's worth a try, definitely.
Let's see if I find a file with non visible characters like yours.

@Wendell
I did it, but, as I said, my "make" command fails with the some errors telling that refmain.tex is missing (it's the root latex file supposed to be generated by doxygen).

@Dimitri
No, my layout_file flag points to nothing
LAYOUT_FILE            = 

I'm trying robert's suggestion tomorrow. If I discover what is going wrong with nice self-contained examples, I'll be glad to report it on bugzilla. Let's see what I get then...

Thanks to all,
Hugo Benício.



On Tue, Nov 26, 2013 at 5:13 PM, Dimitri van Heesch <do...@gm...> wrote:

Hi Hugo,
>
>Doxygen should always generate a refman.tex file in the latex output directory.
>Are you using a custom layout file (non-empty LAYOUT_FILE option)?
>If you can capture the behaviour you see in a small self-contained example (=source+config file in a tar or zip) then
>please file a bug report for it here: https://bugzilla.gnome.org/enter_bug.cgi?product=doxygen
>
>Regards,
>  Dimitri
>
>
>On 26 Nov 2013, at 20:40 , Hugo Benicio <hbo...@gm...> wrote:
>
>> Anyone?
>> I really need to generate a pdf documentation but, without any error messages and help from here, It will be almost impossible for me, unfortunately...
>>
>> PS.: My doxy file flags relative to Latex/PDF Generation
>>
>> GENERATE_LATEX         = YES
>> USE_PDFLATEX           = YES
>>
>>
>> On Fri, Nov 22, 2013 at 2:52 PM, Hugo Benicio <hbo...@gm...> wrote:
>> Hi all!
>>
>> I'm trying to generate a PDF documentation of our project here.
>> What is going wrong is that when Latex output is generated, no "refman.tex" file is generated.
>> Apparently there were no errors on doxygen log (only warnings).
>>
>> This is the doxygen log: http://justpaste.it/dnt7
>>
>> and after a "make pdf" command, I get the following:
>> c:\SIGA\trunk\docs\doxygen\latex>pdflatex refman
>> This is pdfTeX, Version 3.1415926-2.4-1.40.13 (MiKTeX 2.9)
>> entering extended mode
>> ! I can't find file `refman'.
>> <*> refman
>>
>> pdflatex couldn't find 'refman' because it doesn't exist. Doxygen couldn't generate it for some mysterious reason I don't know why.
>>
>> Any clues about that?
>>
>> Thanks in advance,
>> Hugo Benício.
>>
>>
>
>> ------------------------------------------------------------------------------
>> Rapidly troubleshoot problems before they affect your business. Most IT
>> organizations don't have a clear picture of how application performance
>> affects their revenue. With AppDynamics, you get 100% visibility into your
>> Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
>> http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk_______________________________________________
>> Doxygen-users mailing list
>> Dox...@li...
>> https://lists.sourceforge.net/lists/listinfo/doxygen-users
>
>

------------------------------------------------------------------------------
Rapidly troubleshoot problems before they affect your business. Most IT 
organizations don't have a clear picture of how application performance 
affects their revenue. With AppDynamics, you get 100% visibility into your 
Java,.NET, & PHP application. Start your 15-day FREE TRIAL of AppDynamics Pro!
http://pubads.g.doubleclick.net/gampad/clk?id=84349351&iu=/4140/ostg.clktrk
_______________________________________________
Doxygen-users mailing list
Dox...@li...
https://lists.sourceforge.net/lists/listinfo/doxygen-users