Re: [DJPlay-devel] mp3 playback speed

[Melanie <me...@t-...>]

Well, it is possible to use the plug layer to resample. However that will 
not make you happy. It causes dropouts when using Jack at anything near 
professional latencies (-p128 and lower).

You might try "-d alsa -d plughw:0 -r 44100 -p1024 -n2" options to Jack.

Melanie


Barry Higgins wrote:
> On Wed, 2004-12-08 at 23:16 +0100, Melanie wrote:
> 
>>DJPlay is geared to 44.1 kHz playback. That is the rate you must set in 
>>Jack. Jack defaults to 48000 if not told otherwise. Use -r 44100 switch to 
>>Jack or set it in QJackctl and all should be fine.
>>
>>NOTE: You cannot use DJPlay with sound cards that do not natively support 
>>44100 Hz.
>>
>>Melanie
> 
> 
> Thanks for the quick reply. -r 44100 won't do it. After some reading and
> playing it would appear i have a sound card that is stuck at 48000. No
> amount of playing with .asoundrc will budge the final output to 44100.
> Time to put the laptop down a play on a proper box.
> 
> Regards
> Barry
> 
> 
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now. 
> http://productguide.itmanagersjournal.com/
> _______________________________________________
> DJPlay-devel mailing list
> DJP...@li...
> https://lists.sourceforge.net/lists/listinfo/djplay-devel
>