into a separate CSV file and loaded it with "File" => "Load Results" into DisChoco.
But it is still not possible to see the result in "Results" > "Plot graphs".
Any hint would be very nice.
Best wishes,
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Dear Teo,
To plot your results you can check the presentation (pptx) of DisChoco from my web page (https://sites.google.com/site/wahbimed/publications/dcr11_DisChoco.pptx?attredirects=0). Especially, slides 14 to 17. After running some experiments you will get some .csv files where all statistics are stored. You can plot these results from the DisChoco GUI. The GUI since the presentation (18-07-2011) has been improved but I think the change is not radical enough to lose you.
--
Mohamed Wahbi
Last edit: Mohamed Wahbi 2013-10-22
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Thank you Mohamed for your quick response! Your presentation helped me, as i showed me, that i did (almost) the same things. Only almost, as i don't get CSV files.
As i can only put a single file to this post, i made a PDF and tracked my way.
Would you be so kind and take a look at it and comment my way?
Sorry for late response, I am very busy these days. I am travelling a lot I do not have time even to check the svn problems.
I don't know if you had configure your experiments or not before running experimentations? If yes, the results should be within the "Test24" folder.
Anyway, I tried to make an updated manual for you (see attached). If you follow the instructions and figures you will get all the results. Please tell me if things don't go well for you.
thank you very much for your very helpful documentation. You put a lot of effort and time into this paper. Thank you!
I was able to reproduce all of your step, until figure 1.4.2, as i do not have "Results" => "View results". But this is not a big deal, i guess you are running a development version of DisChoco.
With best wishes,
Teo
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Dear developers,
i have another question: How do i plot results?
I have a CSV file, which i created manually.:
I got the result in the command line, for example:
1 ABT with MinDomOverDegAO
[(3.0=10/1),(4.0=5/1),(1.0=6/2)]
msg, ncccs, gncccs, NCCPUTime(ms), CCs, solvability, time(s), CPU(s), comulatedCpuTime, AgentOrdering, OK, NOGOOD, ADL, nbObsoleteNogood, nbAssignments, MaxMsgsSize, MsgsSize, ObsoleteOk, nbInferedNogood
17, 2, 2, 2, 3, 1, 228, 1, 2, 6, 2, 0, 0, 0, 4, 10, 19, 0, 1,
So i put
msg, ncccs, gncccs, NCCPUTime(ms), CCs, solvability, time(s), CPU(s), comulatedCpuTime, AgentOrdering, OK, NOGOOD, ADL, nbObsoleteNogood, nbAssignments, MaxMsgsSize, MsgsSize, ObsoleteOk, nbInferedNogood
17, 2, 2, 2, 3, 1, 228, 1, 2, 6, 2, 0, 0, 0, 4, 10, 19, 0, 1,
into a separate CSV file and loaded it with "File" => "Load Results" into DisChoco.
But it is still not possible to see the result in "Results" > "Plot graphs".
Any hint would be very nice.
Best wishes,
Dear Teo,
To plot your results you can check the presentation (pptx) of DisChoco from my web page (https://sites.google.com/site/wahbimed/publications/dcr11_DisChoco.pptx?attredirects=0). Especially, slides 14 to 17. After running some experiments you will get some .csv files where all statistics are stored. You can plot these results from the DisChoco GUI. The GUI since the presentation (18-07-2011) has been improved but I think the change is not radical enough to lose you.
--
Mohamed Wahbi
Last edit: Mohamed Wahbi 2013-10-22
Thank you Mohamed for your quick response! Your presentation helped me, as i showed me, that i did (almost) the same things. Only almost, as i don't get CSV files.
As i can only put a single file to this post, i made a PDF and tracked my way.
Would you be so kind and take a look at it and comment my way?
Thank you in advance and best wishes,
Hi Teo,
Sorry for late response, I am very busy these days. I am travelling a lot I do not have time even to check the svn problems.
I don't know if you had configure your experiments or not before running experimentations? If yes, the results should be within the "Test24" folder.
Anyway, I tried to make an updated manual for you (see attached). If you follow the instructions and figures you will get all the results. Please tell me if things don't go well for you.
Cordially
Mohamed Wahbi
Dear Mohamed,
thank you very much for your very helpful documentation. You put a lot of effort and time into this paper. Thank you!
I was able to reproduce all of your step, until figure 1.4.2, as i do not have "Results" => "View results". But this is not a big deal, i guess you are running a development version of DisChoco.
With best wishes,
Teo