Re: [DIGImend-users] Fwd: About unsupported UC-Logic Tablet TWHA60 v3

[Nikolai K. <sp...@gm...>]

Hi Christopher,

On 04/08/2015 02:00 AM, Christopher Hanna wrote:
> I need the TWHA60 drivers for another computer now, but the link you
> originally sent me doesn't seem to work anymore.

Please use the latest development version, it has support for your tablet
integrated now:

     https://github.com/DIGImend/digimend-kernel-drivers/archive/master.zip

> Also when I attempted to get pressure information through xiniput test, I
> didn't understand what I should put in the device name section, but I
> suspect that there is no pressure information being transmitted.  If you can
> help me determine the device name, I can confirm this.

Look at the output of "xinput list". Find your tablet devices and use their
IDs as parameter to the "xinput test". If you use the latest development
version your stylus device name will have "Pen" on the end, making it easier
to identify.

Nick

On 04/08/2015 02:00 AM, Christopher Hanna wrote:
>
> ---------- Forwarded message ----------
> From: *Christopher Hanna* <shi...@gm... <mailto:shi...@gm...>>
> Date: 7 April 2015 at 19:00
> Subject: Re: [DIGImend-users] About unsupported UC-Logic Tablet TWHA60 v3
> To: Nikolai Kondrashov <sp...@gm... <mailto:sp...@gm...>>
>
>
> Hello Nick,
>
> I need the TWHA60 drivers for another computer now, but the link you originally sent me doesn't seem to work anymore.  Also when I attempted to get pressure information through xiniput test, I didn't understand what I should put in the device name section, but I suspect that there is no pressure information being transmitted.  If you can help me determine the device name, I can confirm this.
>
> Thanks, Chris
>
> On 3 January 2015 at 15:03, Nikolai Kondrashov <sp...@gm... <mailto:sp...@gm...>> wrote:
>
>     Hi Christopher,
>
>     Please keep the maillist in the CC, so others can benefit from our discussion
>     as well.
>
>     On 01/03/2015 09:56 PM, Christopher Hanna wrote:
>
>         On 01/03/2015 07:01 AM, Nikolai Kondrashov wrote:
>
>             Hi Christopher,
>
>             On 01/03/2015 08:35 AM, Christopher Hanna wrote:
>
>                 Hello there, I recently got the tablet listed in the subject line, and
>                 out of the box the pen was able to click things and the buttons worked
>                 (both on the pen and the tablet), but it can't move the cursor. It was
>                 also able to make a dot in any drawing program. I tried to fix it using
>                 the wizardpen solution, but it didn't change anything, however the
>                 wizardpen calibration program recognized the tablet area and gave a
>                 reasonable output.  Can you help me get it to work in some way? Will it
>                 ever be supported in the near future?
>
>
>             There is a development version of digimend-kernel-drivers which adds support
>             for your tablet:
>
>             https://github.com/DIGImend/__digimend-kernel-drivers/__archive/twha60.zip <https://github.com/DIGImend/digimend-kernel-drivers/archive/twha60.zip>
>
>             Could you please try it?
>
>             The support for your tablet is to be in the next version, released within the
>             next two months, perhaps.
>
>
>         The driver you sent me makes the cursor move as it should, and all the
>         functions it had before are retained!  Thanks Nick!  Doesn't seem to be any
>         pressure sensitivity though.  It's not terribly important, but any tips on
>         getting that to work?
>
>
>     You can verify if the X server gets any pressure information by using "xinput
>     test" with your tablet and seeing if you get anything in the third valuator.
>
>     Otherwise, try following some of our (a bit dated) HOWTOs:
>
>     http://localhost:4000/support/
>
>     I would welcome any fixes or updates to them, BTW.
>
>     Nick
>
>
>
>
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2 standard
> Learn Process modeling best practices with Bonita BPM through live exercises
> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
>
>
>
> _______________________________________________
> DIGImend-users mailing list
> DIG...@li...
> https://lists.sourceforge.net/lists/listinfo/digimend-users
>