[DIGImend-users] Fwd: About unsupported UC-Logic Tablet TWHA60 v3

[Christopher H. <shi...@gm...>]

---------- Forwarded message ----------
From: Christopher Hanna <shi...@gm...>
Date: 7 April 2015 at 19:00
Subject: Re: [DIGImend-users] About unsupported UC-Logic Tablet TWHA60 v3
To: Nikolai Kondrashov <sp...@gm...>


Hello Nick,

I need the TWHA60 drivers for another computer now, but the link you
originally sent me doesn't seem to work anymore.  Also when I attempted to
get pressure information through xiniput test, I didn't understand what I
should put in the device name section, but I suspect that there is no
pressure information being transmitted.  If you can help me determine the
device name, I can confirm this.

Thanks, Chris

On 3 January 2015 at 15:03, Nikolai Kondrashov <sp...@gm...> wrote:

> Hi Christopher,
>
> Please keep the maillist in the CC, so others can benefit from our
> discussion
> as well.
>
> On 01/03/2015 09:56 PM, Christopher Hanna wrote:
>
>> On 01/03/2015 07:01 AM, Nikolai Kondrashov wrote:
>>
>>> Hi Christopher,
>>>
>>> On 01/03/2015 08:35 AM, Christopher Hanna wrote:
>>>
>>>> Hello there, I recently got the tablet listed in the subject line, and
>>>> out of the box the pen was able to click things and the buttons worked
>>>> (both on the pen and the tablet), but it can't move the cursor. It was
>>>> also able to make a dot in any drawing program. I tried to fix it using
>>>> the wizardpen solution, but it didn't change anything, however the
>>>> wizardpen calibration program recognized the tablet area and gave a
>>>> reasonable output.  Can you help me get it to work in some way? Will it
>>>> ever be supported in the near future?
>>>>
>>>
>>> There is a development version of digimend-kernel-drivers which adds
>>> support
>>> for your tablet:
>>>
>>> https://github.com/DIGImend/digimend-kernel-drivers/archive/twha60.zip
>>>
>>> Could you please try it?
>>>
>>> The support for your tablet is to be in the next version, released
>>> within the
>>> next two months, perhaps.
>>>
>>>
>> The driver you sent me makes the cursor move as it should, and all the
>> functions it had before are retained!  Thanks Nick!  Doesn't seem to be
>> any
>> pressure sensitivity though.  It's not terribly important, but any tips on
>> getting that to work?
>>
>
> You can verify if the X server gets any pressure information by using
> "xinput
> test" with your tablet and seeing if you get anything in the third
> valuator.
>
> Otherwise, try following some of our (a bit dated) HOWTOs:
>
> http://localhost:4000/support/
>
> I would welcome any fixes or updates to them, BTW.
>
> Nick
>