Re: [DIGImend-devel] DIGImend: Need frame button diagnostics

[Masaru H. <mh...@ne...>]

Hello Nick

Thanks for developing.
We have tested below.
Ugee1000L
Ugee1010B
UgeeEX07
UgeeM540
UgeeM708
UgeeSP1001

If you need more information or additional test , please let us know.

Best regards
Masaru Hirano
Neoblast Inc.

On 2015年03月17日 06:47, Nikolai Kondrashov wrote:
> Dear users of digimend-kernel-drivers,
>
> I'm writing to the DIGImend-users list and addressing a lot of people
> directly
> with a "blind" copy.
>
> Benjamin Tissoires and me are working on making digimend-kernel-drivers
> compatible with current and future versions of the Wacom driver
> (xf86-input-wacom), especially with regard to adding support for remapping
> frame buttons to arbitrary key combinations.
>
> This concerns Huion, Yiynova, Ugee tablets, as well as UC-Logic TWHA60 v3
> tablet.
>
> We would like to ask everyone owning one of these tablets to please take
> some
> diagnostics information from their tablets and send them in reply to this
> message.
>
> To do that please download, build or install the latest version of
> uclogic-tools (previously huion-tools):
>
>      https://github.com/DIGImend/uclogic-tools/releases/tag/v4
>
> Find the bus number and device address of your tablet in "lsusb" output:
>
>      $ lsusb
>      Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate
> Matching Hub
>      Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>      Bus 001 Device 004: ID 04f2:b2ea Chicony Electronics Co., Ltd
> Integrated Camera [ThinkPad]
>      Bus 001 Device 003: ID 0a5c:21e6 Broadcom Corp. BCM20702 Bluetooth
> 4.0 [ThinkPad]
>      Bus 001 Device 008: ID 256c:006e
>
> Here, the last line is a Huion tablet. It is on bus 1, with device
> address 8.
> If you can't spot your tablet, try unplugging it, running "lsusb",
> plugging it
> back, running "lsusb" again and finding the new line.
>
> Execute uclogic-probe, supplying it with the bus number and device
> address you
> found. For the lsusb output above, and if you installed uclogic-tools,
> it will
> look like this:
>
>      $ sudo uclogic-probe 1 8
>
> If you just built it without installing, run from the build tree, like
> this:
>
>      $ sudo ./uclogic-probe 1 8
>
> Please send the output of either of these commands, plus "lsusb -v" output.
>
> More information on uclogic-tools building, installation and usage is
> available in its README.md:
>
>      https://github.com/DIGImend/uclogic-tools/blob/master/README.md
>
> Thank you.
>
> Sincerely,
> Nick
>
>

-- 
=========================================
Masaru Hirano
Neoblast Inc.
Tokiwadai1-67-5-704, Itabashi-ku, Tokyo, Japan
ZIP:174-0071
E-Mail:mh...@ne...
Tel:+81-3-4570-7345
Mob:+81-70-6575-1732
Fax:+81-20-4623-9249
=========================================