Re: [DIGImend-devel] Please Let Me know how to make driver

[Nikolai K. <sp...@gm...>]

Hello Masaru,

Please don't forget to keep DIG...@li... in the CC so
we can have our conversation archived and accessible to others. Thank you.

On 02/02/2015 01:27 PM, Masaru Hirano wrote:
> Hello Nick
>
> Thanks for  M1000L,M708,M860.
> They work fine.
>
> We use ubuntu-studio 14.04 for driver and dump.
> We use ubuntu-studio 12.04, 14.04, windows7, windows8.1 for application.
> They are all deferent machine.
> At first they are fresh install but there are many tablets to test.
> So every device are connected same machine for test without re-install.
>
> We have out-lined preparing testing-enviroment and procedure
>   as enclosed word file.
> Red lines shows  collected data.
>
> Additional tests data are zip file.
> 1010B,EX07,M540,M708,M1000L,SP101(Penate10.1)
>
> If you need more date to work, please let me know.

Thank you for comprehensive diagnostic dumps. They will come in useful for
future drivers.

However, I'd like to have a confirmation that M1000L, M708 and M860 work with
digimend-kernel-drivers [1] properly, before I add their support to a release.

 From the evtest dumps you sent I see that M708 works correctly. Was it tested
with the digimend-kernel-drivers installed?

 From the same dumps, I see that Ugee-1000L is *not* working properly. Was it
tested with the drivers installed?

I don't see M860 in the dumps you sent.

I need to have a proof they (M1000L, M708, M860) work, before I can release
their support. They must work *without* the WizardPen driver. Could you please
test them on a freshly installed machine? I'll try to outline the procedure.

1. Get a fresh install of a Linux distro.
2. Install the Ugee branch of digimend-kernel-drivers [1].
3. Install evtest.
4. Install a few drawing applications. At least The GIMP and MyPaint.
    Optional, but good to do.
5. Connect the tablet.
6. Start evtest and select the pen interface (it's the one which reports data
    on pen movement), do the pen coordinates sample [2], send me the resulting
    file. The same as you did before, but this time making sure the driver is
    installed.
7. Set up drawing applications and test that they can detect varied pressure
    and all of the pen button clicks. Send a screenshot which shows strokes
    with varied pressure. Optional, but good to do.

Thank you.

[1]: https://github.com/DIGImend/digimend-kernel-drivers/archive/ugee.zip
[2]: https://www.youtube.com/watch?v=ysYk8KLY98U