Re: [DIGImend-users] Huion H610 and Gimp: sometimes strange behaviour

[Vince H. <Vi...@Pl...>]

I forgot, was there a reference in the shell?   The udev doesn't work.

If I ever get it working I'll post it.

I'm not at my desk now so cant see it.

------------
Vince
On Feb 13, 2015 11:27 PM, "Christopher Barry" <chr...@gm...>
wrote:

> On Fri, 13 Feb 2015 23:03:22 -0500
> Vince Herried <Vi...@Pl...> wrote:
>
> >to set up the buttons you need to do several things.
> >first create this file....
> >[vince@desk2 ~]$ cat /etc/X11/xorg.conf.d/50-huion.conf
> >Section "InputClass"
> >    Identifier "digimend2 version"
> >    MatchIsTablet "on"
> >    MatchDevicePath "/dev/input/event*"
> >#   use for wacom driver
> >    MatchProduct "PenTablet"
> >    Driver "wacom"
> >        Option "rotate" "half"
> >        #Option         "Button1" "key +Control_L +z -z " # undo
> >        #Option         "Button2" "key +Shift_L +e -e "         #
> > eraser #Option         "Button3" "key +n -n "          # pencil
> >        #Option         "Button8" "key +Shift_L +equal -equal " # zoom
> > in #Option "Button9" "key +minus -minus "          # zoom out
> >        #Option "Button10" "key +bracketright -bracketright "
> > # + pencil
> >        #Option "Button11" "key +bracketleft -bracketleft "
> > # - pencil
> >#       Option  "Button12"              # hand
> >#
> ># end GIMP settings
> >#
> >
> > #   use for evdev
> > #   Driver "evdev"
> > #      Option "InvertX" "on"
> > #      Option "InvertY" "on"
> >EndSection
> >--------------------------------------------------------ends above
> >this line--------------------------------------------------
> >note the commented out settings they don't work.
> >I have the line
> >Option "rotate" "half"
> >because I'm left handed, if you are not left handed, leave that out.
> >
> >
> >Then re-start X. There is a setting in the system settings that will
> >enable the key combination of ctrl alt backspace to cause X to
> >restart.
> >I can't find the kde settings at moment where I enabled that key
> >combination.  There are several ways to re-start X, search google.
> >
> >Then copy the attached shell script some place and mark it
> >executable...;. chmod u+x huion.sh
> >
> >the script is kind of messy, but it works to set up the buttons on my
> >H610.
> >
> >good luck.
> >------------------
> >Vince
> >
> >On Fri, Feb 13, 2015 at 5:49 PM, Sergey 'Jin' Bostandzhyan
> ><ji...@me...> wrote:
> >> Hi,
> >>
> >> first of all: thanks a lot for the driver! I'm on Fedora 20 with
> >> 3.18.5-101.fc20.x86_64 kernel, just plugged it in and it worked :)
> >>
> >> I do however experience some glitches now and then and I am not sure
> >> if its a problem with the driver or with Gimp.
> >>
> >> Sometimes when I start Gimp I can not paint using the tablet, i.e.
> >> the input devices does not switch to Huion when I'm trying to paint.
> >> I can still navigate all menus and clicks on menus and toolboxes
> >> work, but painting on the canvas is impossible. When this happens,
> >> painting with the mouse is also impossible, while clicks on menus
> >> etc. work fine.
> >>
> >> When this happens I have to quite Gimp, disconnect and reconnect the
> >> tablet and start Gimp again and chances are high that it will just
> >> start working again.
> >>
> >> Any ideas how to debug this?
> >>
> >> Second thing that I noticed is that it's sometimes recognized
> >> differently in Gimp. When selecting the tablet in the input devices
> >> dialog I will see no keys  at all, sometimes I will see >200 keys
> >> which is really weird.
> >>
> >> And one last question: is there also a utility, similar to the one
> >> that is supplied with the windows drivers, to tell the tablet to
> >> send other key combos? In default mode it sends weird combinations
> >> with ctrl- and shift- and I somehow failed to remap that.
> >>
> >> Kind regards,
> >> Jin
> >>
> >>
> >>
> ------------------------------------------------------------------------------
> >> Dive into the World of Parallel Programming. The Go Parallel Website,
> >> sponsored by Intel and developed in partnership with Slashdot Media,
> >> is your hub for all things parallel software development, from
> >> weekly thought leadership blogs to news, videos, case studies,
> >> tutorials and more. Take a look and join the conversation now.
> >> http://goparallel.sourceforge.net/
> >> _______________________________________________ DIGImend-users
> >> mailing list DIG...@li...
> >> https://lists.sourceforge.net/lists/listinfo/digimend-users
>
> Vince,
> Can you send your "/etc/udev/rules.d/50-local.rules" file too?
>
> Thanks.
>
>
> --
> Regards,
> Christopher Barry
>
> Random geeky fortune:
> <SlayR> i just bought MS Office 2000 for only $20!!!
> <Knghtbrd> you got ripped off  ;>
> <SlayR> i know ;)
>
>
> ------------------------------------------------------------------------------
> Dive into the World of Parallel Programming. The Go Parallel Website,
> sponsored by Intel and developed in partnership with Slashdot Media, is
> your
> hub for all things parallel software development, from weekly thought
> leadership blogs to news, videos, case studies, tutorials and more. Take a
> look and join the conversation now. http://goparallel.sourceforge.net/
> _______________________________________________
> DIGImend-users mailing list
> DIG...@li...
> https://lists.sourceforge.net/lists/listinfo/digimend-users
>