Re: [DIGImend-devel] KYE MousePen i608x
Brought to you by:
spb_nick
Menu
▾
▴
Re: [DIGImend-devel] KYE MousePen i608x
|
From: Vikko O. <tc...@gm...> - 2015-01-05 08:46:57
|
Unfortunately, the process of compiling failed. The problem was in configure phase. "..checking for LIBUSB... no configure: error: Package requirements (libusb-1.0 >= 1.0.0) were not met: No package 'libusb-1.0' found.." I was also unable to install the libusb package. Here's the output sudo apt-get install libusb Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package libusb I already do apt-get update with no error. What should I do? Manually download the package? Where can I download? I mean, from multiverse or universe? Or else? On 4 January 2015 at 22:05, Nikolai Kondrashov <sp...@gm...> wrote: > Hi Vikko, > > I'll be copying digimend-devel from now on, so others can benefit from our > discussion. I should've done it from the start. Please keep the maillist in > the CC by answering using "Reply to all". > > On 01/04/2015 01:11 PM, Vikko Okviandho wrote: > >> Err.. sorry. But I don't get what to do with the archive kye.zip (called >> usbhid-dump-kye.zip when downloaded) >> Should I install this or what? And how do I start with "Collect raw >> samples"? >> > > You don't need to install it, but you need to build it. > > First you'll need to install build dependencies: > > sudo apt-get install autotools-dev autoconf automake libtool > pkg-config libxml2-dev > > Then unpack the archive and go into the resulting directory and build the > package: > > ./bootstrap && ./configure && make > > Please send the output, if it fails. > > If it succeeds, you'll then be able to run usbhid-dump from the same > directory > as such: > > src/usbhid-dump > > You'll be able to dump input from your tablet as such: > > src/usbhid-dump -m 0458:501a -es > > If it works, please proceed with "Collect raw samples" and further from the > diagnostic collection HOWTO, using the command above, redirecting the > output > to files, as described. > > Thank you. > > Nick > > On 01/04/2015 01:11 PM, Vikko Okviandho wrote: > >> Err.. sorry. But I don't get what to do with the archive kye.zip (called >> usbhid-dump-kye.zip when downloaded) >> Should I install this or what? And how do I start with "Collect raw >> samples"? >> >> On 4 January 2015 at 05:55, Nikolai Kondrashov <sp...@gm... >> <mailto:sp...@gm...>> wrote: >> >> Hi Vikko, >> >> On 12/20/2014 12:28 PM, Vikko Okviandho wrote: >> >> I'm still waiting >> >> >> Thanks for the diagnostics. The tablet behavior and the report >> descriptor look >> quite different from the previous version, so we won't get away with >> a simple >> driver modification. >> >> We need to see if it will respond to the usual initialization attempt >> and how. >> >> Could you please try collecting the diagnostics with this version of >> usbhid-dump, which tries to initialize the tablet before dumping: >> >> https://github.com/DIGImend/__usbhid-dump/archive/kye.zip < >> https://github.com/DIGImend/usbhid-dump/archive/kye.zip> >> >> You can start with "Collect raw samples", as the previous steps will >> produce >> the same results. >> >> Thank you. >> >> Nick >> >> On 12/20/2014 12:28 PM, Vikko Okviandho wrote: >> >> I'm still waiting >> >> On 15 December 2014 at 06:42, Vikko Okviandho <tc...@gm... >> <mailto:tc...@gm...> <mailto:tc...@gm... <mailto: >> tc...@gm...>>> wrote: >> >> Well.. I have the mouse bundled. So I went until the mouse >> part. Here's the output. I can do this again if necessary. >> >> On 15 December 2014 at 02:37, Nikolai Kondrashov < >> sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... >> <mailto:sp...@gm...>>> wrote: >> >> On 12/14/2014 09:22 PM, Vikko Okviandho wrote: >> >> Same as before and everyone. Able to move the >> pointer, but no clicks. And >> absolutely no pressure. Getting desperate here. >> Hahaha.. Btw, it's 0x501a. >> >> >> Alright, could you please collect the diagnostics >> according to this page: >> http://digimend.github.io/____support/howto/trbl/____diagnostics/ >> <http://digimend.github.io/__support/howto/trbl/__diagnostics/> < >> http://digimend.github.io/__support/howto/trbl/__diagnostics/ < >> http://digimend.github.io/support/howto/trbl/diagnostics/>> >> >> Up to and including the pen coordinates, no need to go >> further for now. >> >> BTW, does your tablet have a mouse? >> >> Thank you. >> >> Nick >> >> On 12/14/2014 09:22 PM, Vikko Okviandho wrote: >> >> Same as before and everyone. Able to move the >> pointer, but no clicks. And absolutely no pressure. Getting desperate here. >> Hahaha.. Btw, it's 0x501a. >> >> On 15 December 2014 at 02:19, Nikolai Kondrashov < >> sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... >> <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto: >> sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>>> >> wrote: >> >> On 12/14/2014 09:08 PM, Vikko Okviandho wrote: >> >> Here's my uname -r output 3.13.0-40-generic >> Should I still install >> linux-image-3.11.0-26-generic? >> >> >> No, that will do. What's the tablet's behavior >> with that kernel? >> >> Nick >> >> On 15 December 2014 at 02:03, Nikolai >> Kondrashov <sp...@gm... <mailto:sp...@gm...> <mailto: >> sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... >> <mailto:sp...@gm...> <mailto:sp...@gm... <mailto: >> sp...@gm...>>> <mailto:sp...@gm... <mailto:sp...@gm...> >> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto: >> sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... >> <mailto:sp...@gm...>>>>> wrote: >> >> On 12/14/2014 08:22 PM, Vikko >> Okviandho wrote: >> >> I downloaded and installed the one >> from >> http://kernel.ubuntu.com/~________kernel-ppa/mainline/v3.4-_ >> _______precise/ <http://kernel.ubuntu.com/~___ >> ___kernel-ppa/mainline/v3.4-______precise/> < >> http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ < >> http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/>> < >> http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ < >> http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/> < >> http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/ < >> http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/>>> < >> http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ < >> http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/> < >> http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/ < >> http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/>> < >> http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/ >> <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/> >> <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/ < >> http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.4-precise/>>>> >> >> >> Um, I'm not sure if that is official. >> >> But it got worse. I can't even >> move the pointer anymore and the indicator >> light of the tablet lit >> continuously until I put it off from my laptop. >> What's next? >> >> >> Try running "sudo apt-get install >> linux-image-3.11.0-26-generic" and then >> rebooting into that kernel. >> >> Nick >> >> On 12/14/2014 08:22 PM, Vikko >> Okviandho wrote: >> >> I downloaded and installed the one >> from http://kernel.ubuntu.com/~________kernel-ppa/mainline/v3.4-_ >> _______precise/ <http://kernel.ubuntu.com/~___ >> ___kernel-ppa/mainline/v3.4-______precise/> < >> http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ < >> http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/>> < >> http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ < >> http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/> < >> http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/ < >> http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/>>> < >> http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ < >> http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/> < >> http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/ < >> http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/>> >> <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____ >> precise/ <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/> >> <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/ < >> http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.4-precise/>>>> >> But it got worse. I can't even >> move the pointer anymore and the indicator light of the tablet lit >> continuously until I put it off from my laptop. What's next? >> >> On 15 December 2014 at 00:47, >> Nikolai Kondrashov <sp...@gm... <mailto:sp...@gm...> <mailto: >> sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... >> <mailto:sp...@gm...> <mailto:sp...@gm... <mailto: >> sp...@gm...>>> <mailto:sp...@gm... <mailto:sp...@gm...> >> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto: >> sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... >> <mailto:sp...@gm...>>>> <mailto:sp...@gm... <mailto: >> sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> >> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto: >> sp...@gm... <mailto:sp...@gm...>>> <mailto:sp...@gm... >> <mailto:sp...@gm...> <mailto:sp...@gm... <mailto: >> sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> >> <mailto:sp...@gm... <mailto:sp...@gm...>>>>>> wrote: >> >> Yes, the one from the >> official repositories. >> >> On Dec 14, 2014 7:44 PM, >> "Vikko Okviandho" <tc...@gm... <mailto:tc...@gm...> <mailto: >> tc...@gm... <mailto:tc...@gm...>> <mailto:tc...@gm... >> <mailto:tc...@gm...> <mailto:tc...@gm... <mailto: >> tc...@gm...>>> <mailto:tc...@gm... <mailto:tc...@gm...> >> <mailto:tc...@gm... <mailto:tc...@gm...>> <mailto: >> tc...@gm... <mailto:tc...@gm...> <mailto:tc...@gm... >> <mailto:tc...@gm...>>>> <mailto:tc...@gm... <mailto: >> tc...@gm...> <mailto:tc...@gm... <mailto:tc...@gm...>> >> <mailto:tc...@gm... <mailto:tc...@gm...> <mailto: >> tc...@gm... <mailto:tc...@gm...>>> <mailto:tc...@gm... >> <mailto:tc...@gm...> <mailto:tc...@gm... <mailto: >> tc...@gm...>> <mailto:tc...@gm... <mailto:tc...@gm...> >> <mailto:tc...@gm... <mailto:tc...@gm...>>>>>> wrote: >> >> I'll try. Should I use >> the 'official Ubuntu' one? >> >> On 14 December 2014 at >> 23:28, Nikolai Kondrashov <sp...@gm... <mailto:sp...@gm...> >> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto: >> sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... >> <mailto:sp...@gm...>>> <mailto:sp...@gm... <mailto: >> sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> >> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto: >> sp...@gm... <mailto:sp...@gm...>>>> <mailto:sp...@gm... >> <mailto:sp...@gm...> <mailto:sp...@gm... <mailto: >> sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> >> <mailto:sp...@gm... <mailto:sp...@gm...>>> <mailto: >> sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... >> <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto: >> sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm... >> >>>>>> wrote: >> >> Hi Vikko, >> >> On 12/12/2014 05:02 >> AM, Vikko Okviandho wrote: >> >> First, I want to >> apologize in advance for any bother I would make to you. >> >> >> Not a problem, if >> you're prepared to wait for my answers :) >> >> So, I got this >> Genius (KYE) MousePen i608x drawing tablet few months ago. >> And since then, I >> tried to make it usable on Ubuntu 12.04.5. I looked >> everywhere, even >> I tried to compile your Digimend work >> >> (linux_3.2.0-31.50+digimend.6.__________1) myself to no avail. I tried >> to download the >> .deb, but SF (or >> my ISP) won't allow me. >> >> What should I do? >> I searched in Ubuntu Forums and found no answer since the >> links are expired >> or no more available. I guess the posts are too old so >> they removed them. >> >> I would >> appreciate any helps. I don't want to use it under windows >> exclusively. Even >> the tablet performs not so well under windows. >> >> >> First of all, AFAIK, >> your tablet should work on kernels starting with v3.4. >> It seems that Ubuntu >> 12.04 should have kernel v3.11 available, try installing >> and booting into it >> and check if the tablet works. >> >> Nick >> >> >> >> >> >> >> >> > |
