Re: [DIGImend-devel] KYE MousePen i608x
Brought to you by:
spb_nick
Menu
▾
▴
Re: [DIGImend-devel] KYE MousePen i608x
|
From: Nikolai K. <sp...@gm...> - 2015-01-04 15:05:34
|
Hi Vikko,
I'll be copying digimend-devel from now on, so others can benefit from our
discussion. I should've done it from the start. Please keep the maillist in
the CC by answering using "Reply to all".
On 01/04/2015 01:11 PM, Vikko Okviandho wrote:
> Err.. sorry. But I don't get what to do with the archive kye.zip (called
> usbhid-dump-kye.zip when downloaded)
> Should I install this or what? And how do I start with "Collect raw
> samples"?
You don't need to install it, but you need to build it.
First you'll need to install build dependencies:
sudo apt-get install autotools-dev autoconf automake libtool pkg-config libxml2-dev
Then unpack the archive and go into the resulting directory and build the
package:
./bootstrap && ./configure && make
Please send the output, if it fails.
If it succeeds, you'll then be able to run usbhid-dump from the same directory
as such:
src/usbhid-dump
You'll be able to dump input from your tablet as such:
src/usbhid-dump -m 0458:501a -es
If it works, please proceed with "Collect raw samples" and further from the
diagnostic collection HOWTO, using the command above, redirecting the output
to files, as described.
Thank you.
Nick
On 01/04/2015 01:11 PM, Vikko Okviandho wrote:
> Err.. sorry. But I don't get what to do with the archive kye.zip (called usbhid-dump-kye.zip when downloaded)
> Should I install this or what? And how do I start with "Collect raw samples"?
>
> On 4 January 2015 at 05:55, Nikolai Kondrashov <sp...@gm... <mailto:sp...@gm...>> wrote:
>
> Hi Vikko,
>
> On 12/20/2014 12:28 PM, Vikko Okviandho wrote:
>
> I'm still waiting
>
>
> Thanks for the diagnostics. The tablet behavior and the report descriptor look
> quite different from the previous version, so we won't get away with a simple
> driver modification.
>
> We need to see if it will respond to the usual initialization attempt and how.
>
> Could you please try collecting the diagnostics with this version of
> usbhid-dump, which tries to initialize the tablet before dumping:
>
> https://github.com/DIGImend/__usbhid-dump/archive/kye.zip <https://github.com/DIGImend/usbhid-dump/archive/kye.zip>
>
> You can start with "Collect raw samples", as the previous steps will produce
> the same results.
>
> Thank you.
>
> Nick
>
> On 12/20/2014 12:28 PM, Vikko Okviandho wrote:
>
> I'm still waiting
>
> On 15 December 2014 at 06:42, Vikko Okviandho <tc...@gm... <mailto:tc...@gm...> <mailto:tc...@gm... <mailto:tc...@gm...>>> wrote:
>
> Well.. I have the mouse bundled. So I went until the mouse part. Here's the output. I can do this again if necessary.
>
> On 15 December 2014 at 02:37, Nikolai Kondrashov <sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>> wrote:
>
> On 12/14/2014 09:22 PM, Vikko Okviandho wrote:
>
> Same as before and everyone. Able to move the pointer, but no clicks. And
> absolutely no pressure. Getting desperate here. Hahaha.. Btw, it's 0x501a.
>
>
> Alright, could you please collect the diagnostics according to this page:
> http://digimend.github.io/____support/howto/trbl/____diagnostics/ <http://digimend.github.io/__support/howto/trbl/__diagnostics/> <http://digimend.github.io/__support/howto/trbl/__diagnostics/ <http://digimend.github.io/support/howto/trbl/diagnostics/>>
>
> Up to and including the pen coordinates, no need to go further for now.
>
> BTW, does your tablet have a mouse?
>
> Thank you.
>
> Nick
>
> On 12/14/2014 09:22 PM, Vikko Okviandho wrote:
>
> Same as before and everyone. Able to move the pointer, but no clicks. And absolutely no pressure. Getting desperate here. Hahaha.. Btw, it's 0x501a.
>
> On 15 December 2014 at 02:19, Nikolai Kondrashov <sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>>> wrote:
>
> On 12/14/2014 09:08 PM, Vikko Okviandho wrote:
>
> Here's my uname -r output 3.13.0-40-generic
> Should I still install linux-image-3.11.0-26-generic?
>
>
> No, that will do. What's the tablet's behavior with that kernel?
>
> Nick
>
> On 15 December 2014 at 02:03, Nikolai Kondrashov <sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>>>> wrote:
>
> On 12/14/2014 08:22 PM, Vikko Okviandho wrote:
>
> I downloaded and installed the one from
> http://kernel.ubuntu.com/~________kernel-ppa/mainline/v3.4-________precise/ <http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/> <http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/>> <http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/> <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/ <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/>>> <http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/> <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/ <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/>> <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/
> <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/> <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/ <http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.4-precise/>>>>
>
>
> Um, I'm not sure if that is official.
>
> But it got worse. I can't even move the pointer anymore and the indicator
> light of the tablet lit continuously until I put it off from my laptop.
> What's next?
>
>
> Try running "sudo apt-get install linux-image-3.11.0-26-generic" and then
> rebooting into that kernel.
>
> Nick
>
> On 12/14/2014 08:22 PM, Vikko Okviandho wrote:
>
> I downloaded and installed the one from http://kernel.ubuntu.com/~________kernel-ppa/mainline/v3.4-________precise/ <http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/> <http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/>> <http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/> <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/ <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/>>> <http://kernel.ubuntu.com/~______kernel-ppa/mainline/v3.4-______precise/ <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/> <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/ <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/>>
> <http://kernel.ubuntu.com/~____kernel-ppa/mainline/v3.4-____precise/ <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/> <http://kernel.ubuntu.com/~__kernel-ppa/mainline/v3.4-__precise/ <http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.4-precise/>>>>
> But it got worse. I can't even move the pointer anymore and the indicator light of the tablet lit continuously until I put it off from my laptop. What's next?
>
> On 15 December 2014 at 00:47, Nikolai Kondrashov <sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>>>>> wrote:
>
> Yes, the one from the official repositories.
>
> On Dec 14, 2014 7:44 PM, "Vikko Okviandho" <tc...@gm... <mailto:tc...@gm...> <mailto:tc...@gm... <mailto:tc...@gm...>> <mailto:tc...@gm... <mailto:tc...@gm...> <mailto:tc...@gm... <mailto:tc...@gm...>>> <mailto:tc...@gm... <mailto:tc...@gm...> <mailto:tc...@gm... <mailto:tc...@gm...>> <mailto:tc...@gm... <mailto:tc...@gm...> <mailto:tc...@gm... <mailto:tc...@gm...>>>> <mailto:tc...@gm... <mailto:tc...@gm...> <mailto:tc...@gm... <mailto:tc...@gm...>> <mailto:tc...@gm... <mailto:tc...@gm...> <mailto:tc...@gm... <mailto:tc...@gm...>>> <mailto:tc...@gm... <mailto:tc...@gm...> <mailto:tc...@gm... <mailto:tc...@gm...>> <mailto:tc...@gm... <mailto:tc...@gm...> <mailto:tc...@gm... <mailto:tc...@gm...>>>>>> wrote:
>
> I'll try. Should I use the 'official Ubuntu' one?
>
> On 14 December 2014 at 23:28, Nikolai Kondrashov <sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>> <mailto:sp...@gm... <mailto:sp...@gm...> <mailto:sp...@gm... <mailto:sp...@gm...>>>>>> wrote:
>
> Hi Vikko,
>
> On 12/12/2014 05:02 AM, Vikko Okviandho wrote:
>
> First, I want to apologize in advance for any bother I would make to you.
>
>
> Not a problem, if you're prepared to wait for my answers :)
>
> So, I got this Genius (KYE) MousePen i608x drawing tablet few months ago.
> And since then, I tried to make it usable on Ubuntu 12.04.5. I looked
> everywhere, even I tried to compile your Digimend work
> (linux_3.2.0-31.50+digimend.6.__________1) myself to no avail. I tried to download the
> .deb, but SF (or my ISP) won't allow me.
>
> What should I do? I searched in Ubuntu Forums and found no answer since the
> links are expired or no more available. I guess the posts are too old so
> they removed them.
>
> I would appreciate any helps. I don't want to use it under windows
> exclusively. Even the tablet performs not so well under windows.
>
>
> First of all, AFAIK, your tablet should work on kernels starting with v3.4.
> It seems that Ubuntu 12.04 should have kernel v3.11 available, try installing
> and booting into it and check if the tablet works.
>
> Nick
>
>
>
>
>
>
>
|
