Re: [DIGImend-devel] Tablet issue

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

On 11/23/2014 09:14 PM, Jake Waffle wrote:
> Thanks for getting back to me!
>
> So... (sigh), I believe I had installed this previously, so I ran
> 'sudo rmmod hid-huion' and proceeded to 'make install'
>
> [jake@localhost digimend-kernel-drivers-twha60]$ sudo make install
> make -C /lib/modules/3.17.3-300.fc21.x86_64/build SUBDIRS=/home/jake/Downloads/digimend-kernel-drivers-twha60 modules_install
> make[1]: Entering directory '/usr/src/kernels/3.17.3-300.fc21.x86_64'
>    INSTALL /home/jake/Downloads/digimend-kernel-drivers-twha60/hid-huion.ko
> Can't read private key
>    INSTALL /home/jake/Downloads/digimend-kernel-drivers-twha60/hid-uclogic.ko
> Can't read private key
>    DEPMOD  3.17.3-300.fc21.x86_64
> make[1]: Leaving directory '/usr/src/kernels/3.17.3-300.fc21.x86_64'
> install -D -m 0644 digimend.conf /etc/depmod.d/digimend.conf
> depmod -a
> install hid-rebind /sbin/hid-rebind
> install -m 0644 hid-rebind.rules /lib/udev/rules.d/70-hid-rebind.rules
> udevadm control --reload
>
> Unplugged tablet/restarted. It hasn't done anything towards the issue, perhaps I've foolishly not installed it correctly?
> Apologies for the hassle.

Um, unless you rebooted, then the tablet likely got handled by the already
loaded hid-uclogic. Try rebooting, or doing "sudo rmmod hid-uclogic".
I should've mentioned it.

If that doesn't help, could you please send the output of the following
commands?

     modinfo hid-huion
     modinfo hid-uclogic
     ls -l /sys/bus/hid/devices/0003:5543:0781.*/driver

Thank you.

Nick

On 11/23/2014 09:14 PM, Jake Waffle wrote:
> Thanks for getting back to me!
>
> So... (sigh), I believe I had installed this previously, so I ran
> 'sudo rmmod hid-huion' and proceeded to 'make install'
>
> [jake@localhost digimend-kernel-drivers-twha60]$ sudo make install
> make -C /lib/modules/3.17.3-300.fc21.x86_64/build SUBDIRS=/home/jake/Downloads/digimend-kernel-drivers-twha60 modules_install
> make[1]: Entering directory '/usr/src/kernels/3.17.3-300.fc21.x86_64'
>    INSTALL /home/jake/Downloads/digimend-kernel-drivers-twha60/hid-huion.ko
> Can't read private key
>    INSTALL /home/jake/Downloads/digimend-kernel-drivers-twha60/hid-uclogic.ko
> Can't read private key
>    DEPMOD  3.17.3-300.fc21.x86_64
> make[1]: Leaving directory '/usr/src/kernels/3.17.3-300.fc21.x86_64'
> install -D -m 0644 digimend.conf /etc/depmod.d/digimend.conf
> depmod -a
> install hid-rebind /sbin/hid-rebind
> install -m 0644 hid-rebind.rules /lib/udev/rules.d/70-hid-rebind.rules
> udevadm control --reload
>
> Unplugged tablet/restarted. It hasn't done anything towards the issue, perhaps I've foolishly not installed it correctly?
> Apologies for the hassle.
>
>  > Date: Sun, 23 Nov 2014 20:46:55 +0200
>  > From: sp...@gm...
>  > To: jcm...@ho...
>  > CC: dig...@li...
>  > Subject: Re: Tablet issue
>  >
>  > On 11/23/2014 07:17 PM, Jake Waffle wrote:
>  > > I had tried ./bootstrap too, however it produced the same 'No such file or
>  > > directory' message, I can never seem to navigate the git site correctly,
>  > > thanks for the link to that page.
>  >
>  > Hmm, that's strange.
>  >
>  > > The rpm works for me.
>  >
>  > Great!
>  >
>  > > [jake@localhost ~]$ sudo huion-probe 5 5
>  > > [sudo] password for jake:
>  > > M 55 00 43 00 2D 00 4C 00 4F 00 47 00 49 00 43 00
>  > > P 54 00 57 00 48 00 41 00 36 00 30 00
>  > > S 64 0E 03 40 9C A8 61 03 00 FF 07 A0 0F 08 00
>  > > S 65 04 03 00 71
>  > > S 6E 04 03 30 00
>  > > S 79 14 03 48 00 41 00 36 00 30 00 2D 00 46 00 34 00 30 00 31 00
>  > > S 7A 08 03 01 08 00 00 00 00
>  >
>  > Nice, it works!
>  >
>  > > Running huion-decode seems to just sit there, unless it's supposed to take
>  > > more than 10 mins.
>  >
>  > Huion-decode is expecting huion-probe output on its input. For your
>  > huion-probe output it produces this:
>  >
>  > Manufacturer: UC-LOGIC
>  > Product: TWHA60
>  > Max X: 40000
>  > Max Y: 25000
>  > Max pressure: 2047
>  > Resolution: 4000
>  > Internal model: HA60-F401
>  >
>  > Which shows it's decoding it fine.
>  >
>  > > The cursor now moves when moving the pen on and off the tablet, but does not
>  > > move consistently as you'd expect, it requires a sort of big flick to move.
>  >
>  > This is expected when report descriptor is not fixed which is the work of a
>  > kernel driver.
>  >
>  > > I'm assuming it's the side effect of proprietary mode as mentioned?
>  >
>  > Yes.
>  >
>  > I've made a branch of digimend-kernel-drivers which has a change moving your
>  > tablet under the hid-huion driver. It is very likely to make it work.
>  >
>  > You can download it here:
>  > https://github.com/DIGImend/digimend-kernel-drivers/archive/twha60.zip
>  >
>  > Follow the instructions in README.md to install the driver.
>  >
>  > Nick
>  >
>  > On 11/23/2014 07:17 PM, Jake Waffle wrote:
>  > > I had tried ./bootstrap too, however it produced the same 'No such file or directory' message, I can never seem to navigate the git site correctly, thanks for the link to that page. The rpm works for me.
>  > >
>  > > [jake@localhost ~]$ sudo huion-probe 5 5
>  > > [sudo] password for jake:
>  > > M 55 00 43 00 2D 00 4C 00 4F 00 47 00 49 00 43 00
>  > > P 54 00 57 00 48 00 41 00 36 00 30 00
>  > > S 64 0E 03 40 9C A8 61 03 00 FF 07 A0 0F 08 00
>  > > S 65 04 03 00 71
>  > > S 6E 04 03 30 00
>  > > S 79 14 03 48 00 41 00 36 00 30 00 2D 00 46 00 34 00 30 00 31 00
>  > > S 7A 08 03 01 08 00 00 00 00
>  > >
>  > > Running huion-decode seems to just sit there, unless it's supposed to take more than 10 mins.
>  > >
>  > > The cursor now moves when moving the pen on and off the tablet, but does not move consistently as you'd expect, it requires a sort of big flick to move.
>  > > I'm assuming it's the side effect of proprietary mode as mentioned?
>  > >
>  > >
>  > > > Date: Sun, 23 Nov 2014 18:59:08 +0200
>  > > > From: sp...@gm...
>  > > > To: jcm...@ho...
>  > > > CC: DIG...@li...
>  > > > Subject: Re: Tablet issue
>  > > >
>  > > > I'm copying the maillist anyway, as others might be encountering the same
>  > > > problem.
>  > > >
>  > > > On 11/23/2014 06:52 PM, Jake Waffle wrote:
>  > > > > Hi Nick,
>  > > > >
>  > > > > Apologies... I don't seem to be able to set huion-tools up (I won't post
>  > > > > this bit to the archive considering it's likely me just not knowing).
>  > > > > Installation states to use the ./configure, however after a quick search I'm
>  > > > > suggested I should be using autoconf first?
>  > > > >
>  > > > > [jake@localhost huion-tools-master]$ ./configure
>  > > > > bash: ./configure: No such file or directory
>  > > > > [jake@localhost huion-tools-master]$ autoconf
>  > > > > configure.ac:24: error: possibly undefined macro: AM_INIT_AUTOMAKE
>  > > > > If this token and others are legitimate, please use m4_pattern_allow.
>  > > > > See the Autoconf documentation.
>  > > > > configure.ac:25: error: possibly undefined macro: AM_MAINTAINER_MODE
>  > > > > [jake@localhost huion-tools-master]$ ./configure
>  > > > > ./configure: line 1849: syntax error near unexpected token `1.9'
>  > > > > ./configure: line 1849: `AM_INIT_AUTOMAKE(1.9 -Wall foreign)'
>  > > >
>  > > > If you want to build from the git tree (as downloaded using the "Download ZIP"
>  > > > link on the right), you should execute ./bootstrap first (as mentioned shortly
>  > > > in README.md).
>  > > >
>  > > > However, you might be better off downloading and building a release tarball
>  > > > (preferably latest, v3 [1]), or downloading and installing a release rpm or
>  > > > deb package.
>  > > >
>  > > > > Sorry.
>  > > >
>  > > > Nothing to feel sorry about :)
>  > > >
>  > > > Nick
>  > > >
>  > > > [1] https://github.com/DIGImend/huion-tools/releases/tag/v3
>  > > >
>  > > > On 11/23/2014 06:52 PM, Jake Waffle wrote:
>  > > > > Hi Nick,
>  > > > >
>  > > > > Apologies... I don't seem to be able to set huion-tools up (I won't post this bit to the archive considering it's likely me just not knowing).
>  > > > > Installation states to use the ./configure, however after a quick search I'm suggested I should be using autoconf first?
>  > > > >
>  > > > > [jake@localhost huion-tools-master]$ ./configure
>  > > > > bash: ./configure: No such file or directory
>  > > > > [jake@localhost huion-tools-master]$ autoconf
>  > > > > configure.ac:24: error: possibly undefined macro: AM_INIT_AUTOMAKE
>  > > > > If this token and others are legitimate, please use m4_pattern_allow.
>  > > > > See the Autoconf documentation.
>  > > > > configure.ac:25: error: possibly undefined macro: AM_MAINTAINER_MODE
>  > > > > [jake@localhost huion-tools-master]$ ./configure
>  > > > > ./configure: line 1849: syntax error near unexpected token `1.9'
>  > > > > ./configure: line 1849: `AM_INIT_AUTOMAKE(1.9 -Wall foreign)'
>  > > > >
>  > > > > Sorry.
>  > > > >
>  > > > >
>  > > > >
>  > > > > > Date: Sun, 23 Nov 2014 17:43:02 +0200
>  > > > > > From: sp...@gm...
>  > > > > > To: jcm...@ho...
>  > > > > > CC: DIG...@li...
>  > > > > > Subject: Re: Tablet issue
>  > > > > >
>  > > > > > > Could you please try running huion-probe [1] on this tablet (don't be confused
>  > > > > > > by the name, Huion tablets are mostly UC-Logic tablets inside) and seeing if
>  > > > > > > it works/produces any output? Perhaps we'll be able to handle your tablet in
>  > > > > > > our hid-huion driver, as part of the digimend-kernel-drivers package.
>  > > > > >
>  > > > > > And here is the link to huion-tools which contain huion-probe:
>  > > > > >
>  > > > > > [1] https://github.com/DIGImend/huion-tools
>  > > > > >
>  > > > > > On 11/23/2014 05:39 PM, Nikolai Kondrashov wrote:
>  > > > > > > Hi Jake,
>  > > > > > >
>  > > > > > > I'm copying the answer to the digimend-devel maillist to keep archive and have
>  > > > > > > others posted. Please use "Reply to all" when replying.
>  > > > > > >
>  > > > > > > On 11/21/2014 06:08 AM, Jake Waffle wrote:
>  > > > > > >> Hello,
>  > > > > > >>
>  > > > > > >> I currently own a Monoprice tablet, specifically "Monoprice MP1060-HA60",
>  > > > > > >> which is a rebranded "UC-Logic Tablet TWHA60". On your support page it
>  > > > > > >> mentions the drivers for this are in development, but also states it's
>  > > > > > >> supported in the latest kernels.
>  > > > > > >>
>  > > > > > >> The tablet doesn't seem to work for me, it is able to act as a mouse in
>  > > > > > >> terms of clicking, the buttons on the pen seem to work and at least two
>  > > > > > >> side-buttons (close and save) work, however I cannot move the cursor with
>  > > > > > >> the pen. Pressing the pen against the tablet doesn't indicate any pressure
>  > > > > > >> either.
>  > > > > > >>
>  > > > > > >> I'm honestly a 'noob' linux user and I run the latest Fedora. I've included
>  > > > > > >> diagnostics, however 'frame_buttons', 'frame_wheel_srolling', 'pen_buttons',
>  > > > > > >> 'pen_coords', 'pen_pressure' and 'pen_tilt' produced empty documents.
>  > > > > > >>
>  > > > > > >> Any help/advice would be appreciated.
>  > > > > > >
>  > > > > > > This is the third version of this tablet I see and the first one with three
>  > > > > > > interfaces. One older model was made to work, IIRC. The newer ones weren't
>  > > > > > > catered to yet.
>  > > > > > >
>  > > > > > > Could you please try running huion-probe [1] on this tablet (don't be confused
>  > > > > > > by the name, Huion tablets are mostly UC-Logic tablets inside) and seeing if
>  > > > > > > it works/produces any output? Perhaps we'll be able to handle your tablet in
>  > > > > > > our hid-huion driver, as part of the digimend-kernel-drivers package.
>  > > > > > >
>  > > > > > > Nick
>  > > > > > >
>  > > > > > > On 11/21/2014 06:08 AM, Jake Waffle wrote:
>  > > > > > >> Hello,
>  > > > > > >>
>  > > > > > >> I currently own a Monoprice tablet, specifically "Monoprice MP1060-HA60", which is a rebranded "UC-Logic Tablet TWHA60". On your support page it mentions the drivers for this are in development, but also states it's supported in the latest kernels.
>  > > > > > >>
>  > > > > > >> The tablet doesn't seem to work for me, it is able to act as a mouse in terms of clicking, the buttons on the pen seem to work and at least two side-buttons (close and save) work, however I cannot move the cursor with the pen. Pressing the pen against the tablet doesn't indicate any pressure either.
>  > > > > > >>
>  > > > > > >> I'm honestly a 'noob' linux user and I run the latest Fedora. I've included diagnostics, however 'frame_buttons', 'frame_wheel_srolling', 'pen_buttons', 'pen_coords', 'pen_pressure' and 'pen_tilt' produced empty documents.
>  > > > > > >>
>  > > > > > >> Any help/advice would be appreciated.
>  > > > > > >
>  > > > > >
>  > > >
>  >