Re: [DIGImend-devel] Please Let Me know how to make driver

[Nikolai K. <sp...@gm...>]

Hello Masaru,

On 11/20/2014 02:59 AM, Masaru Hirano wrote:
> Hello Nick
>
> Thanks for your information.
>
> How are you feeling?
> Are you Ok from cold.

I'm mostly fine now, thank you. However my daughter has developed some health
issues and we needed to spend much time dealing with them. It is better now,
but not over yet.

> I have read the page 1 to 20 to understand easily.
> Thanks for your informations.

Glad to hear it was easy for you. I can suggest studying usbhid-dump further,
accompanied by hidrd-convert, with regards to what you learned/can learn from
the HID spec and examining how your tablets work.

Also, try using huion-probe with them and see if it works/outputs anything
which huion-decode can process.

See these links:
https://github.com/DIGImend/usbhid-dump
https://github.com/DIGImend/hidrd
https://github.com/DIGImend/huion-tools

> I would like to build for Ugee products to sell in japan.
> Please help us.

I'll try to put some hours into that in the coming week, although I'll need to
catch up with my primary job as well and it won't be easy.

Nick

On 11/20/2014 02:59 AM, Masaru Hirano wrote:
> Hello Nick
>
> Thanks for your information.
>
> How are you feeling?
> Are you Ok from cold.
>
> I have read the page 1 to 20 to understand easily.
> Thanks for your informations.
>
> I would like to build for Ugee products to sell in japan.
> Please help us.
>
> regards,
> Masaru Hirano
>
> On 2014年11月14日 22:20, Nikolai Kondrashov wrote:
>> Hi Masaru,
>>
>> On 11/07/2014 04:19 AM, Masaru Hirano wrote:
>>> Thanks for helping us.
>>> I have tried 3 model of tablet.
>>> Tablet monitor, Sketch-pad, Tablet board.
>>> Please let me know further instruction.
>>
>> I caught a cold and won't be able to finish a HOWTO for you this week.
>> Perhaps the next week will be better.
>>
>> Meanwhile I can suggest reading at least the first few chapters to the HID
>> spec:
>>
>> http://www.usb.org/developers/hidpage/HID1_11.pdf
>>
>> Nick
>>
>> On 11/07/2014 04:19 AM, Masaru Hirano wrote:
>>> Hello Nick
>>>
>>> Thanks for helping us.
>>> I have tried 3 model of tablet.
>>> Tablet monitor, Sketch-pad, Tablet board.
>>> Please let me know further instruction.
>>>
>>> Best regards,
>>> Masaru Hirano
>>> On 2014年11月06日 18:34, Nikolai Kondrashov wrote:
>>>> Hello Masaru,
>>>>
>>>> On 11/06/2014 07:30 AM, Masaru Hirano wrote:
>>>>> Hello Nick
>>>>>
>>>>> Thanks for your support.
>>>>> We are Ugee distributer in japan.
>>>>> Please let us know how to make driver.
>>>>
>>>> First, try to familiarize yourself with the digimend-kernel-drivers
>>>> source.
>>>> Add your tablet product IDs to "huion_devices" and see what happens.
>>>>
>>>> Use usbhid-dump to check what tablet reports, check files under
>>>> /sys/kernel/debug/hid to see how kernel interprets what tablet sends.
>>>> Use
>>>> "evtest" to see what kernel sends to userspace. Use "xinput" to see how
>>>> X.org
>>>> interprets what kernel sends. Try the above with different tablet
>>>> models.
>>>>
>>>> This should make you better prepared to what comes next, while I write
>>>> detailed instructions.
>>>>
>>>>> We would like to build ugee tablet driver.
>>>>> VID=5543
>>>>> PID=0081
>>>>> These are all fine.
>>>>> VID=5543
>>>>> PID=0045
>>>>> These are not work fine.
>>>>> Calibration does not been succeed.
>>>>
>>>> Ah, so it's UC-Logic.
>>>>
>>>>> If you give me some procedure and tools for  making tablet and tablet
>>>>> monitor driver.
>>>>> I would like to make.
>>>>> Under ubuntu studio 14.04
>>>>
>>>> I don't have a good HOWTO on driver making at the moment, but I plan to
>>>> make
>>>> one. I'll start next week and will put it on http://digimend.github.io.
>>>> Will
>>>> notify you as soon as anything shows up.
>>>>
>>>>> File 1:
>>>>> VID=5543
>>>>> PID=0081
>>>>> are work fine.
>>>>
>>>> Well, I wouldn't say having to use the WizardPen driver is fine,
>>>> although it's
>>>> a good start. Ultimately, a tablet should work without configuration
>>>> at all
>>>> and certainly without building and installing a non-standard and hackish
>>>> X.org driver.
>>>>
>>>> Is Ugee 1000L the only tablet with PID=0081?
>>>>
>>>>> File 2:
>>>>> We would like to build for them.
>>>>
>>>> Are all the tablets in that Excel file use the same PID=0045?
>>>>
>>>>> We are small company of system integrator for creative buginners.
>>>>> So we need to provide  no wacom tablet and ubuntu-studio 14.04 for
>>>>> cost effective in Japan.
>>>>
>>>> Yes, that would be a good way to reduce costs.
>>>>
>>>>> Ofcource when we made new driver, we will share for everyone.
>>>>
>>>> That would be a good thing to do, thank you.
>>>>
>>>> Nick
>>>>
>>>> On 11/06/2014 07:30 AM, Masaru Hirano wrote:
>>>>> Hello Nick
>>>>>
>>>>> Thanks for your support.
>>>>> We are Ugee distributer in japan.
>>>>> Please let us know how to make driver.
>>>>>
>>>>> We would like to build ugee tablet driver.
>>>>> VID=5543
>>>>> PID=0081
>>>>> These are all fine.
>>>>> VID=5543
>>>>> PID=0045
>>>>> These are not work fine.
>>>>> Calibration does not been succeed.
>>>>>
>>>>> If you give me some procedure and tools for  making tablet and tablet
>>>>> monitor driver.
>>>>> I would like to make.
>>>>> Under ubuntu studio 14.04
>>>>>
>>>>> File 1:
>>>>> VID=5543
>>>>> PID=0081
>>>>> are work fine.
>>>>>
>>>>> File 2:
>>>>> We would like to build for them.
>>>>>
>>>>> We are small company of system integrator for creative buginners.
>>>>> So we need to provide  no wacom tablet and ubuntu-studio 14.04 for
>>>>> cost effective in Japan.
>>>>>
>>>>> Ofcource when we made new driver, we will share for everyone.
>>>>>
>>>>> Best regards,
>>>>> Masaru Hirano
>>>>> Neoblast Inc.
>>>>>
>>>>> On 2014年11月05日 18:24, Nikolai Kondrashov wrote:
>>>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote:
>>>>>>> We would appreciate it, if you could provide us with a list of Ugee
>>>>>>> tablets
>>>>>>> which you found working with our tablets
>>>>>>
>>>>>> I meant "our drivers", of course.
>>>>>>
>>>>>> Nick
>>>>>>
>>>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote:
>>>>>>> Hello Masaru,
>>>>>>>
>>>>>>> I'm very glad to hear that another tablet distributor is choosing to
>>>>>>> contribute their effort to making Linux drivers for their tablets.
>>>>>>>
>>>>>>> This year Yiynova helped with drivers for their tablets as well, and
>>>>>>> now have
>>>>>>> a bunch of models supported.
>>>>>>>
>>>>>>> We would appreciate it, if you could provide us with a list of Ugee
>>>>>>> tablets
>>>>>>> which you found working with our tablets, along with their USB
>>>>>>> VID:PID
>>>>>>> pairs,
>>>>>>> so we can add them to the list and advertise their support.
>>>>>>>
>>>>>>> Regarding the so far unsupported tablets, I would also like to know
>>>>>>> their
>>>>>>> names and VID:PID pairs, along with their parameters (if those are
>>>>>>> unavailable
>>>>>>> on the web). I would also like to know which hardware they're based
>>>>>>> on, if
>>>>>>> possible. Is it UC-Logic, Waltop, anything else?
>>>>>>>
>>>>>>> This would get us started.
>>>>>>>
>>>>>>> Thank you.
>>>>>>>
>>>>>>> Sincerely,
>>>>>>> Nick
>>>>>>>
>>>>>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote:
>>>>>>>> Hello developper
>>>>>>>>
>>>>>>>> We are neoblast inc japan.
>>>>>>>> We are one of Ugee Distributer.
>>>>>>>>
>>>>>>>> There are few driver for ugee.
>>>>>>>> Most of product work by digemend kernel driver.
>>>>>>>> But some product (tablet monitor, sketch=pad) do not work.
>>>>>>>> http://ugee.net/index.asp
>>>>>>>>
>>>>>>>> We use ubuntu-studio 14.04.
>>>>>>>>
>>>>>>>> Digemend kernel driver are not enough for us.
>>>>>>>> There are no friver for tablet monitor for ubuntu 14.04.
>>>>>>>>
>>>>>>>> We would like to build by ourseleves.
>>>>>>>> Please let us know how to make kernel driver.
>>>>>>>>
>>>>>>>> best regards,
>>>>>>>> Masaru Hirano
>>>>>>>> neoblast inc.
>>>>>>
>>>>>>
>>>>>>
>>>>
>>>>
>>>>
>>
>>
>>
>