Re: [DIGImend-devel] Please Let Me know how to make driver

[Masaru H. <mh...@ne...>]

Hello Nick

Thanks for your information.

How are you feeling?
Are you Ok from cold.

I have read the page 1 to 20 to understand easily.
Thanks for your informations.

I would like to build for Ugee products to sell in japan.
Please help us.

regards,
Masaru Hirano

On 2014年11月14日 22:20, Nikolai Kondrashov wrote:
> Hi Masaru,
>
> On 11/07/2014 04:19 AM, Masaru Hirano wrote:
>> Thanks for helping us.
>> I have tried 3 model of tablet.
>> Tablet monitor, Sketch-pad, Tablet board.
>> Please let me know further instruction.
>
> I caught a cold and won't be able to finish a HOWTO for you this week.
> Perhaps the next week will be better.
>
> Meanwhile I can suggest reading at least the first few chapters to the HID
> spec:
>
> http://www.usb.org/developers/hidpage/HID1_11.pdf
>
> Nick
>
> On 11/07/2014 04:19 AM, Masaru Hirano wrote:
>> Hello Nick
>>
>> Thanks for helping us.
>> I have tried 3 model of tablet.
>> Tablet monitor, Sketch-pad, Tablet board.
>> Please let me know further instruction.
>>
>> Best regards,
>> Masaru Hirano
>> On 2014年11月06日 18:34, Nikolai Kondrashov wrote:
>>> Hello Masaru,
>>>
>>> On 11/06/2014 07:30 AM, Masaru Hirano wrote:
>>>> Hello Nick
>>>>
>>>> Thanks for your support.
>>>> We are Ugee distributer in japan.
>>>> Please let us know how to make driver.
>>>
>>> First, try to familiarize yourself with the digimend-kernel-drivers
>>> source.
>>> Add your tablet product IDs to "huion_devices" and see what happens.
>>>
>>> Use usbhid-dump to check what tablet reports, check files under
>>> /sys/kernel/debug/hid to see how kernel interprets what tablet sends.
>>> Use
>>> "evtest" to see what kernel sends to userspace. Use "xinput" to see how
>>> X.org
>>> interprets what kernel sends. Try the above with different tablet
>>> models.
>>>
>>> This should make you better prepared to what comes next, while I write
>>> detailed instructions.
>>>
>>>> We would like to build ugee tablet driver.
>>>> VID=5543
>>>> PID=0081
>>>> These are all fine.
>>>> VID=5543
>>>> PID=0045
>>>> These are not work fine.
>>>> Calibration does not been succeed.
>>>
>>> Ah, so it's UC-Logic.
>>>
>>>> If you give me some procedure and tools for  making tablet and tablet
>>>> monitor driver.
>>>> I would like to make.
>>>> Under ubuntu studio 14.04
>>>
>>> I don't have a good HOWTO on driver making at the moment, but I plan to
>>> make
>>> one. I'll start next week and will put it on http://digimend.github.io.
>>> Will
>>> notify you as soon as anything shows up.
>>>
>>>> File 1:
>>>> VID=5543
>>>> PID=0081
>>>> are work fine.
>>>
>>> Well, I wouldn't say having to use the WizardPen driver is fine,
>>> although it's
>>> a good start. Ultimately, a tablet should work without configuration
>>> at all
>>> and certainly without building and installing a non-standard and hackish
>>> X.org driver.
>>>
>>> Is Ugee 1000L the only tablet with PID=0081?
>>>
>>>> File 2:
>>>> We would like to build for them.
>>>
>>> Are all the tablets in that Excel file use the same PID=0045?
>>>
>>>> We are small company of system integrator for creative buginners.
>>>> So we need to provide  no wacom tablet and ubuntu-studio 14.04 for
>>>> cost effective in Japan.
>>>
>>> Yes, that would be a good way to reduce costs.
>>>
>>>> Ofcource when we made new driver, we will share for everyone.
>>>
>>> That would be a good thing to do, thank you.
>>>
>>> Nick
>>>
>>> On 11/06/2014 07:30 AM, Masaru Hirano wrote:
>>>> Hello Nick
>>>>
>>>> Thanks for your support.
>>>> We are Ugee distributer in japan.
>>>> Please let us know how to make driver.
>>>>
>>>> We would like to build ugee tablet driver.
>>>> VID=5543
>>>> PID=0081
>>>> These are all fine.
>>>> VID=5543
>>>> PID=0045
>>>> These are not work fine.
>>>> Calibration does not been succeed.
>>>>
>>>> If you give me some procedure and tools for  making tablet and tablet
>>>> monitor driver.
>>>> I would like to make.
>>>> Under ubuntu studio 14.04
>>>>
>>>> File 1:
>>>> VID=5543
>>>> PID=0081
>>>> are work fine.
>>>>
>>>> File 2:
>>>> We would like to build for them.
>>>>
>>>> We are small company of system integrator for creative buginners.
>>>> So we need to provide  no wacom tablet and ubuntu-studio 14.04 for
>>>> cost effective in Japan.
>>>>
>>>> Ofcource when we made new driver, we will share for everyone.
>>>>
>>>> Best regards,
>>>> Masaru Hirano
>>>> Neoblast Inc.
>>>>
>>>> On 2014年11月05日 18:24, Nikolai Kondrashov wrote:
>>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote:
>>>>>> We would appreciate it, if you could provide us with a list of Ugee
>>>>>> tablets
>>>>>> which you found working with our tablets
>>>>>
>>>>> I meant "our drivers", of course.
>>>>>
>>>>> Nick
>>>>>
>>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote:
>>>>>> Hello Masaru,
>>>>>>
>>>>>> I'm very glad to hear that another tablet distributor is choosing to
>>>>>> contribute their effort to making Linux drivers for their tablets.
>>>>>>
>>>>>> This year Yiynova helped with drivers for their tablets as well, and
>>>>>> now have
>>>>>> a bunch of models supported.
>>>>>>
>>>>>> We would appreciate it, if you could provide us with a list of Ugee
>>>>>> tablets
>>>>>> which you found working with our tablets, along with their USB
>>>>>> VID:PID
>>>>>> pairs,
>>>>>> so we can add them to the list and advertise their support.
>>>>>>
>>>>>> Regarding the so far unsupported tablets, I would also like to know
>>>>>> their
>>>>>> names and VID:PID pairs, along with their parameters (if those are
>>>>>> unavailable
>>>>>> on the web). I would also like to know which hardware they're based
>>>>>> on, if
>>>>>> possible. Is it UC-Logic, Waltop, anything else?
>>>>>>
>>>>>> This would get us started.
>>>>>>
>>>>>> Thank you.
>>>>>>
>>>>>> Sincerely,
>>>>>> Nick
>>>>>>
>>>>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote:
>>>>>>> Hello developper
>>>>>>>
>>>>>>> We are neoblast inc japan.
>>>>>>> We are one of Ugee Distributer.
>>>>>>>
>>>>>>> There are few driver for ugee.
>>>>>>> Most of product work by digemend kernel driver.
>>>>>>> But some product (tablet monitor, sketch=pad) do not work.
>>>>>>> http://ugee.net/index.asp
>>>>>>>
>>>>>>> We use ubuntu-studio 14.04.
>>>>>>>
>>>>>>> Digemend kernel driver are not enough for us.
>>>>>>> There are no friver for tablet monitor for ubuntu 14.04.
>>>>>>>
>>>>>>> We would like to build by ourseleves.
>>>>>>> Please let us know how to make kernel driver.
>>>>>>>
>>>>>>> best regards,
>>>>>>> Masaru Hirano
>>>>>>> neoblast inc.
>>>>>
>>>>>
>>>>>
>>>
>>>
>>>
>
>
>

-- 
=========================================
Masaru Hirano
Neoblast Inc.
Tokiwadai1-67-5-704, Itabashi-ku, Tokyo, Japan
ZIP:174-0071
E-Mail:mh...@ne...
Tel:+81-3-4570-7345
Mob:+81-70-6575-1732
Fax:+81-20-4623-9249
=========================================