Re: [DIGImend-devel] Please Let Me know how to make driver

[Nikolai K. <sp...@gm...>]

Hi Masaru,

On 11/07/2014 04:19 AM, Masaru Hirano wrote:
> Thanks for helping us.
> I have tried 3 model of tablet.
> Tablet monitor, Sketch-pad, Tablet board.
> Please let me know further instruction.

I caught a cold and won't be able to finish a HOWTO for you this week.
Perhaps the next week will be better.

Meanwhile I can suggest reading at least the first few chapters to the HID
spec:

http://www.usb.org/developers/hidpage/HID1_11.pdf

Nick

On 11/07/2014 04:19 AM, Masaru Hirano wrote:
> Hello Nick
>
> Thanks for helping us.
> I have tried 3 model of tablet.
> Tablet monitor, Sketch-pad, Tablet board.
> Please let me know further instruction.
>
> Best regards,
> Masaru Hirano
> On 2014年11月06日 18:34, Nikolai Kondrashov wrote:
>> Hello Masaru,
>>
>> On 11/06/2014 07:30 AM, Masaru Hirano wrote:
>>> Hello Nick
>>>
>>> Thanks for your support.
>>> We are Ugee distributer in japan.
>>> Please let us know how to make driver.
>>
>> First, try to familiarize yourself with the digimend-kernel-drivers source.
>> Add your tablet product IDs to "huion_devices" and see what happens.
>>
>> Use usbhid-dump to check what tablet reports, check files under
>> /sys/kernel/debug/hid to see how kernel interprets what tablet sends. Use
>> "evtest" to see what kernel sends to userspace. Use "xinput" to see how
>> X.org
>> interprets what kernel sends. Try the above with different tablet models.
>>
>> This should make you better prepared to what comes next, while I write
>> detailed instructions.
>>
>>> We would like to build ugee tablet driver.
>>> VID=5543
>>> PID=0081
>>> These are all fine.
>>> VID=5543
>>> PID=0045
>>> These are not work fine.
>>> Calibration does not been succeed.
>>
>> Ah, so it's UC-Logic.
>>
>>> If you give me some procedure and tools for  making tablet and tablet
>>> monitor driver.
>>> I would like to make.
>>> Under ubuntu studio 14.04
>>
>> I don't have a good HOWTO on driver making at the moment, but I plan to
>> make
>> one. I'll start next week and will put it on http://digimend.github.io.
>> Will
>> notify you as soon as anything shows up.
>>
>>> File 1:
>>> VID=5543
>>> PID=0081
>>> are work fine.
>>
>> Well, I wouldn't say having to use the WizardPen driver is fine,
>> although it's
>> a good start. Ultimately, a tablet should work without configuration at all
>> and certainly without building and installing a non-standard and hackish
>> X.org driver.
>>
>> Is Ugee 1000L the only tablet with PID=0081?
>>
>>> File 2:
>>> We would like to build for them.
>>
>> Are all the tablets in that Excel file use the same PID=0045?
>>
>>> We are small company of system integrator for creative buginners.
>>> So we need to provide  no wacom tablet and ubuntu-studio 14.04 for
>>> cost effective in Japan.
>>
>> Yes, that would be a good way to reduce costs.
>>
>>> Ofcource when we made new driver, we will share for everyone.
>>
>> That would be a good thing to do, thank you.
>>
>> Nick
>>
>> On 11/06/2014 07:30 AM, Masaru Hirano wrote:
>>> Hello Nick
>>>
>>> Thanks for your support.
>>> We are Ugee distributer in japan.
>>> Please let us know how to make driver.
>>>
>>> We would like to build ugee tablet driver.
>>> VID=5543
>>> PID=0081
>>> These are all fine.
>>> VID=5543
>>> PID=0045
>>> These are not work fine.
>>> Calibration does not been succeed.
>>>
>>> If you give me some procedure and tools for  making tablet and tablet
>>> monitor driver.
>>> I would like to make.
>>> Under ubuntu studio 14.04
>>>
>>> File 1:
>>> VID=5543
>>> PID=0081
>>> are work fine.
>>>
>>> File 2:
>>> We would like to build for them.
>>>
>>> We are small company of system integrator for creative buginners.
>>> So we need to provide  no wacom tablet and ubuntu-studio 14.04 for
>>> cost effective in Japan.
>>>
>>> Ofcource when we made new driver, we will share for everyone.
>>>
>>> Best regards,
>>> Masaru Hirano
>>> Neoblast Inc.
>>>
>>> On 2014年11月05日 18:24, Nikolai Kondrashov wrote:
>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote:
>>>>> We would appreciate it, if you could provide us with a list of Ugee
>>>>> tablets
>>>>> which you found working with our tablets
>>>>
>>>> I meant "our drivers", of course.
>>>>
>>>> Nick
>>>>
>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote:
>>>>> Hello Masaru,
>>>>>
>>>>> I'm very glad to hear that another tablet distributor is choosing to
>>>>> contribute their effort to making Linux drivers for their tablets.
>>>>>
>>>>> This year Yiynova helped with drivers for their tablets as well, and
>>>>> now have
>>>>> a bunch of models supported.
>>>>>
>>>>> We would appreciate it, if you could provide us with a list of Ugee
>>>>> tablets
>>>>> which you found working with our tablets, along with their USB VID:PID
>>>>> pairs,
>>>>> so we can add them to the list and advertise their support.
>>>>>
>>>>> Regarding the so far unsupported tablets, I would also like to know
>>>>> their
>>>>> names and VID:PID pairs, along with their parameters (if those are
>>>>> unavailable
>>>>> on the web). I would also like to know which hardware they're based
>>>>> on, if
>>>>> possible. Is it UC-Logic, Waltop, anything else?
>>>>>
>>>>> This would get us started.
>>>>>
>>>>> Thank you.
>>>>>
>>>>> Sincerely,
>>>>> Nick
>>>>>
>>>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote:
>>>>>> Hello developper
>>>>>>
>>>>>> We are neoblast inc japan.
>>>>>> We are one of Ugee Distributer.
>>>>>>
>>>>>> There are few driver for ugee.
>>>>>> Most of product work by digemend kernel driver.
>>>>>> But some product (tablet monitor, sketch=pad) do not work.
>>>>>> http://ugee.net/index.asp
>>>>>>
>>>>>> We use ubuntu-studio 14.04.
>>>>>>
>>>>>> Digemend kernel driver are not enough for us.
>>>>>> There are no friver for tablet monitor for ubuntu 14.04.
>>>>>>
>>>>>> We would like to build by ourseleves.
>>>>>> Please let us know how to make kernel driver.
>>>>>>
>>>>>> best regards,
>>>>>> Masaru Hirano
>>>>>> neoblast inc.
>>>>
>>>>
>>>>
>>
>>
>>