Re: [DIGImend-users] Aiptek Media Tablet 14000u worked instantly (and almost complete) in linux 3.3
Brought to you by:
spb_nick
Menu
▾
▴
Re: [DIGImend-users] Aiptek Media Tablet 14000u worked instantly (and almost complete) in linux 3.3.2
|
From: Favux ... <fav...@gm...> - 2012-04-30 00:12:29
|
On Sun, Apr 29, 2012 at 6:05 PM, Eduardo H. Silva <hob...@gm...> wrote:
>
>> The gnome-settings-daemon runs after the xorg.conf.d conf files so
>> what it says goes. And you can over ride it with an xsetwacom
>> command. So what happens if you run these commands:
>> xsetwacom set 10 Button 2 2
>> xsetwacom set 10 Button 3 3
>> Any change on the stylus buttons behavior? If the tablet isn't being
>> recognized maybe no gnome-settings-daemon key values are being
>> applied.
>
> It remains the same, and I've figured that:
>
> 1 - xsetwacom is working. If I assign:
>
> Button 1 1
> Button 2 3
> Button 3 2
>
> , the button's behaviors switch.
>
> 2 - if I assign:
> Button 1 0
> Button 2 2
> Button 3 3
>
> , the buttons are working as expected in Gimp and elsewhere, but
> pressing with the stylus doesn't work.
Out of curiosity what happens when you assign 'Button 1 1' along with?
Button 2 2
Button 3 3
Still see the confusion between Button 2 and Button 1?
> Also, the broken behavior in Inkscape and throughout Gnome's interface
> is different than Gimp's. If the assignment is:
> Button 1 1
> Button 2 2
> Button 3 3
>
> , button 2 does action 1 and 2 (left and middle-click) and button 3
> does action 3 (right-click).
So for now is it OK if you use xsetwacom to assign:
Button 2 3
Button 3 3
Sure they're both assigned 3 (right click), but does it avoid the
confusion with 2 (middle click) & 1?
>> So if this works try uncommenting those button options from
>> earlier in the Wacom snippet and see what happens. Actually try that
>> either way I suppose.
>
> Uncommented the options and restarted X, but
Oops, what happened?
>>> But what about the last message about wacom in Xorg.0.log:
>>> UnloadModule: "wacom"
>>
>> What, where is that in the last Xorg.0.log snippet you gave? We know
>> the stylus is on the Wacom X driver (module) from the diagnostics you
>> ran above.
>
> Ah, at the time of that diagnostic, I was only copying what seemed to
> have to do with the tablets, and may have missed the unload message.
> Also, only now I noticed that once I removed waltop-on-evdev.conf from
> /usr/share/X11/xorg.conf.d/ , makes the wheels not work.
> Sorry about this confusion.
So now you've lost the scroll wheels. Then leave it in? Or do we
need to match to another evdev snippet, maybe?
MatchIsPointer "on"
Or else try the snippet Nick suggested for that.
> Ok, so my configuration is exactly like the one you told in your first
> reply. To make sure, it is:
>
> /usr/share/X11/xorg.conf.d/:
> Section "InputClass"
> Identifier "Wacom class"
> MatchProduct "Wacom|WACOM|WALTOP|Hanwang|PTK-540WL"
> MatchDevicePath "/dev/input/event*"
> Driver "wacom"
> # Option "Button1" "3"
> # Option "Button2" "1"
> # Option "Button3" "2"
>
>
> EndSection
>
> Section "InputClass"
> Identifier "Wacom serial class"
> MatchProduct "Serial Wacom Tablet"
> Driver "wacom"
> EndSection
>
> Section "InputClass"
> Identifier "Wacom serial class identifiers"
> MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
> Driver "wacom"
> EndSection
>
>
> # N-Trig Duosense Electromagnetic Digitizer
> Section "InputClass"
> Identifier "Wacom N-Trig class"
> MatchProduct "HID 1b96:0001|N-Trig Pen"
> MatchDevicePath "/dev/input/event*"
> Driver "wacom"
> Option "Button2" "3"
> EndSection
>
> /etc/X11/xorg.conf.d/52-waltop-custom.conf
> Section "InputClass"
> Identifier "Waltop evdev custom"
> MatchProduct "WALTOP"
> MatchIsKeyboard "on"
> MatchDevicePath "/dev/input/event*"
> Driver "evdev"
> EndSection
>
> Section "InputClass"
> Identifier "Waltop wacom custom"
> MatchProduct "WALTOP"
> MatchIsTablet "on"
> MatchDevicePath "/dev/input/event*"
> Driver "wacom"
> Option "Button2" "2"
> Option "Button3" "3"
> EndSection
>
>
> The complete Xorg.0.log after restarting X with the tablet plugged in:
>
> [128945.868] (II) config/udev: Adding input device WALTOP
> International Corp. Media Tablet (/dev/input/event10)
> [128945.868] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "evdev tablet catchall"
> [128945.868] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "Wacom class"
> [128945.868] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "Waltop wacom custom"
> [128945.868] (II) LoadModule: "wacom"
> [128945.868] (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
> [128945.868] (II) Module wacom: vendor="X.Org Foundation"
> [128945.869] compiled for 1.11.99.901, module version = 0.14.0
> [128945.869] Module class: X.Org XInput Driver
> [128945.869] ABI class: X.Org XInput driver, version 16.0
> [128945.869] (II) Using input driver 'wacom' for 'WALTOP International
> Corp. Media Tablet'
> [128945.869] (**) WALTOP International Corp. Media Tablet: always
> reports core events
> [128945.869] (**) Option "Device" "/dev/input/event10"
> [128945.869] (II) WALTOP International Corp. Media Tablet: type not
> specified, assuming 'stylus'.
> [128945.869] (II) WALTOP International Corp. Media Tablet: other types
> will be automatically added.
> [128945.869] (**) Option "Button2" "2"
> [128945.869] (**) Option "Button3" "3"
> [128945.869] (--) WALTOP International Corp. Media Tablet stylus:
> using pressure threshold of 27 for button 1
> [128945.869] (--) WALTOP International Corp. Media Tablet stylus:
> Wacom USB Bamboo tablet maxX=16383 maxY=16383 maxZ=1023 resX=53000
> resY=88000 tilt=disabled
> [128945.869] (II) WALTOP International Corp. Media Tablet stylus:
> hotplugging dependent devices.
> [128945.869] (EE) WALTOP International Corp. Media Tablet stylus:
> Invalid type 'eraser' for this device.
> [128945.869] (EE) WALTOP International Corp. Media Tablet stylus:
> Invalid type 'cursor' for this device.
> [128945.869] (EE) WALTOP International Corp. Media Tablet stylus:
> Invalid type 'touch' for this device.
> [128945.869] (EE) WALTOP International Corp. Media Tablet stylus:
> Invalid type 'pad' for this device.
> [128945.869] (II) WALTOP International Corp. Media Tablet stylus:
> hotplugging completed.
> [128945.869] (**) Option "config_info"
> "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input424/event10"
> [128945.869] (II) XINPUT: Adding extended input device "WALTOP
> International Corp. Media Tablet stylus" (type: STYLUS, id 10)
> [128945.869] (**) WALTOP International Corp. Media Tablet stylus:
> (accel) keeping acceleration scheme 1
> [128945.869] (**) WALTOP International Corp. Media Tablet stylus:
> (accel) acceleration profile 0
> [128945.869] (**) WALTOP International Corp. Media Tablet stylus:
> (accel) acceleration factor: 2.000
> [128945.869] (**) WALTOP International Corp. Media Tablet stylus:
> (accel) acceleration threshold: 4
> [128945.870] (II) config/udev: Adding input device WALTOP
> International Corp. Media Tablet (/dev/input/mouse2)
> [128945.870] (II) No input driver specified, ignoring this device.
> [128945.870] (II) This device may have been added with another device file.
> [128945.870] (II) config/udev: Adding input device WALTOP
> International Corp. Media Tablet (/dev/input/event11)
> [128945.870] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "Wacom class"
> [128945.870] (II) Using input driver 'wacom' for 'WALTOP International
> Corp. Media Tablet'
> [128945.870] (**) WALTOP International Corp. Media Tablet: always
> reports core events
> [128945.870] (**) Option "Device" "/dev/input/event11"
> [128945.870] (EE) WALTOP International Corp. Media Tablet: Invalid
> type 'stylus' for this device.
> [128945.870] (EE) WALTOP International Corp. Media Tablet: Invalid
> type 'eraser' for this device.
> [128945.870] (EE) WALTOP International Corp. Media Tablet: Invalid
> type 'cursor' for this device.
> [128945.870] (EE) WALTOP International Corp. Media Tablet: Invalid
> type 'touch' for this device.
> [128945.870] (EE) WALTOP International Corp. Media Tablet: Invalid
> type 'pad' for this device.
> [128945.871] (EE) WALTOP International Corp. Media Tablet: No type specified
> [128945.871] (EE) PreInit returned 8 for "WALTOP International Corp.
> Media Tablet"
> [128945.871] (II) UnloadModule: "wacom"
I can't tell if that is a general wacom module/X driver unload or not.
As long as 'xsetwacom list' still shows the stylus and you see the
Wacom driver in 'xinput list-props <stylus ID #> we may not need to
worry about this. It appears to be happening to event11 not event10
which is the stylus. But if the stylus isn't in 'xsetwacom list' etc.
then we do have a problem.
> [128945.871] (II) config/udev: Adding input device WALTOP
> International Corp. Media Tablet (/dev/input/event12)
> [128945.871] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "evdev keyboard catchall"
> [128945.871] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "Wacom class"
> [128945.871] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "system-setup-keyboard"
> [128945.871] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "Waltop evdev custom"
> [128945.871] (II) Using input driver 'evdev' for 'WALTOP International
> Corp. Media Tablet'
> [128945.871] (**) WALTOP International Corp. Media Tablet: always
> reports core events
> [128945.871] (**) evdev: WALTOP International Corp. Media Tablet:
> Device: "/dev/input/event12"
> [128945.871] (--) evdev: WALTOP International Corp. Media Tablet:
> Vendor 0x172f Product 0x500
> [128945.871] (--) evdev: WALTOP International Corp. Media Tablet: Found keys
> [128945.871] (II) evdev: WALTOP International Corp. Media Tablet:
> Configuring as keyboard
> [128945.871] (**) Option "config_info"
> "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input426/event12"
> [128945.871] (II) XINPUT: Adding extended input device "WALTOP
> International Corp. Media Tablet" (type: KEYBOARD, id 11)
> [128945.871] (**) Option "xkb_rules" "evdev"
> [128945.871] (**) Option "xkb_model" "pc105"
> [128945.871] (**) Option "xkb_layout" "pt"
> [128945.871] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
> [128945.872] (II) config/udev: Adding input device WALTOP
> International Corp. Media Tablet (/dev/input/event13)
> [128945.872] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "evdev keyboard catchall"
> [128945.872] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "Wacom class"
> [128945.872] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "system-setup-keyboard"
> [128945.872] (**) WALTOP International Corp. Media Tablet: Applying
> InputClass "Waltop evdev custom"
> [128945.872] (II) Using input driver 'evdev' for 'WALTOP International
> Corp. Media Tablet'
> [128945.872] (**) WALTOP International Corp. Media Tablet: always
> reports core events
> [128945.872] (**) evdev: WALTOP International Corp. Media Tablet:
> Device: "/dev/input/event13"
> [128945.872] (--) evdev: WALTOP International Corp. Media Tablet:
> Vendor 0x172f Product 0x500
> [128945.872] (--) evdev: WALTOP International Corp. Media Tablet: Found keys
> [128945.872] (II) evdev: WALTOP International Corp. Media Tablet:
> Configuring as keyboard
> [128945.872] (**) Option "config_info"
> "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input427/event13"
> [128945.872] (II) XINPUT: Adding extended input device "WALTOP
> International Corp. Media Tablet" (type: KEYBOARD, id 12)
> [128945.872] (**) Option "xkb_rules" "evdev"
> [128945.872] (**) Option "xkb_model" "pc105"
> [128945.872] (**) Option "xkb_layout" "pt"
> [128945.872] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,"
Assuming we don't have a driver problem and the stylus is on the Wacom
X driver I'm thinking this is a kernel driver problem. What are your
thoughts Nick?
Favux
|
