Thread: [DIGImend-devel] Please Let Me know how to make driver
Brought to you by:
spb_nick
Menu
▾
▴
digimend-devel
|
From: Masaru H. <mh...@ne...> - 2014-11-05 02:09:02
|
Hello developper We are neoblast inc japan. We are one of Ugee Distributer. There are few driver for ugee. Most of product work by digemend kernel driver. But some product (tablet monitor, sketch=pad) do not work. http://ugee.net/index.asp We use ubuntu-studio 14.04. Digemend kernel driver are not enough for us. There are no friver for tablet monitor for ubuntu 14.04. We would like to build by ourseleves. Please let us know how to make kernel driver. best regards, Masaru Hirano neoblast inc. |
|
From: Nikolai K. <sp...@gm...> - 2014-11-05 09:22:52
|
Hello Masaru, I'm very glad to hear that another tablet distributor is choosing to contribute their effort to making Linux drivers for their tablets. This year Yiynova helped with drivers for their tablets as well, and now have a bunch of models supported. We would appreciate it, if you could provide us with a list of Ugee tablets which you found working with our tablets, along with their USB VID:PID pairs, so we can add them to the list and advertise their support. Regarding the so far unsupported tablets, I would also like to know their names and VID:PID pairs, along with their parameters (if those are unavailable on the web). I would also like to know which hardware they're based on, if possible. Is it UC-Logic, Waltop, anything else? This would get us started. Thank you. Sincerely, Nick On 11/05/2014 03:42 AM, Masaru Hirano wrote: > Hello developper > > We are neoblast inc japan. > We are one of Ugee Distributer. > > There are few driver for ugee. > Most of product work by digemend kernel driver. > But some product (tablet monitor, sketch=pad) do not work. > http://ugee.net/index.asp > > We use ubuntu-studio 14.04. > > Digemend kernel driver are not enough for us. > There are no friver for tablet monitor for ubuntu 14.04. > > We would like to build by ourseleves. > Please let us know how to make kernel driver. > > best regards, > Masaru Hirano > neoblast inc. |
|
From: Nikolai K. <sp...@gm...> - 2014-11-05 09:24:39
|
On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: > We would appreciate it, if you could provide us with a list of Ugee tablets > which you found working with our tablets I meant "our drivers", of course. Nick On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: > Hello Masaru, > > I'm very glad to hear that another tablet distributor is choosing to > contribute their effort to making Linux drivers for their tablets. > > This year Yiynova helped with drivers for their tablets as well, and now have > a bunch of models supported. > > We would appreciate it, if you could provide us with a list of Ugee tablets > which you found working with our tablets, along with their USB VID:PID pairs, > so we can add them to the list and advertise their support. > > Regarding the so far unsupported tablets, I would also like to know their > names and VID:PID pairs, along with their parameters (if those are unavailable > on the web). I would also like to know which hardware they're based on, if > possible. Is it UC-Logic, Waltop, anything else? > > This would get us started. > > Thank you. > > Sincerely, > Nick > > On 11/05/2014 03:42 AM, Masaru Hirano wrote: >> Hello developper >> >> We are neoblast inc japan. >> We are one of Ugee Distributer. >> >> There are few driver for ugee. >> Most of product work by digemend kernel driver. >> But some product (tablet monitor, sketch=pad) do not work. >> http://ugee.net/index.asp >> >> We use ubuntu-studio 14.04. >> >> Digemend kernel driver are not enough for us. >> There are no friver for tablet monitor for ubuntu 14.04. >> >> We would like to build by ourseleves. >> Please let us know how to make kernel driver. >> >> best regards, >> Masaru Hirano >> neoblast inc. |
|
From: Masaru H. <mh...@ne...> - 2014-11-06 05:30:24
Attachments:
Ugee 1000L
20JulAugUgee.xls
|
Hello Nick Thanks for your support. We are Ugee distributer in japan. Please let us know how to make driver. We would like to build ugee tablet driver. VID=5543 PID=0081 These are all fine. VID=5543 PID=0045 These are not work fine. Calibration does not been succeed. If you give me some procedure and tools for making tablet and tablet monitor driver. I would like to make. Under ubuntu studio 14.04 File 1: VID=5543 PID=0081 are work fine. File 2: We would like to build for them. We are small company of system integrator for creative buginners. So we need to provide no wacom tablet and ubuntu-studio 14.04 for cost effective in Japan. Ofcource when we made new driver, we will share for everyone. Best regards, Masaru Hirano Neoblast Inc. On 2014年11月05日 18:24, Nikolai Kondrashov wrote: > On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >> We would appreciate it, if you could provide us with a list of Ugee >> tablets >> which you found working with our tablets > > I meant "our drivers", of course. > > Nick > > On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >> Hello Masaru, >> >> I'm very glad to hear that another tablet distributor is choosing to >> contribute their effort to making Linux drivers for their tablets. >> >> This year Yiynova helped with drivers for their tablets as well, and >> now have >> a bunch of models supported. >> >> We would appreciate it, if you could provide us with a list of Ugee >> tablets >> which you found working with our tablets, along with their USB VID:PID >> pairs, >> so we can add them to the list and advertise their support. >> >> Regarding the so far unsupported tablets, I would also like to know their >> names and VID:PID pairs, along with their parameters (if those are >> unavailable >> on the web). I would also like to know which hardware they're based >> on, if >> possible. Is it UC-Logic, Waltop, anything else? >> >> This would get us started. >> >> Thank you. >> >> Sincerely, >> Nick >> >> On 11/05/2014 03:42 AM, Masaru Hirano wrote: >>> Hello developper >>> >>> We are neoblast inc japan. >>> We are one of Ugee Distributer. >>> >>> There are few driver for ugee. >>> Most of product work by digemend kernel driver. >>> But some product (tablet monitor, sketch=pad) do not work. >>> http://ugee.net/index.asp >>> >>> We use ubuntu-studio 14.04. >>> >>> Digemend kernel driver are not enough for us. >>> There are no friver for tablet monitor for ubuntu 14.04. >>> >>> We would like to build by ourseleves. >>> Please let us know how to make kernel driver. >>> >>> best regards, >>> Masaru Hirano >>> neoblast inc. > > > |
|
From: Nikolai K. <sp...@gm...> - 2014-11-06 09:34:57
|
Hello Masaru, On 11/06/2014 07:30 AM, Masaru Hirano wrote: > Hello Nick > > Thanks for your support. > We are Ugee distributer in japan. > Please let us know how to make driver. First, try to familiarize yourself with the digimend-kernel-drivers source. Add your tablet product IDs to "huion_devices" and see what happens. Use usbhid-dump to check what tablet reports, check files under /sys/kernel/debug/hid to see how kernel interprets what tablet sends. Use "evtest" to see what kernel sends to userspace. Use "xinput" to see how X.org interprets what kernel sends. Try the above with different tablet models. This should make you better prepared to what comes next, while I write detailed instructions. > We would like to build ugee tablet driver. > VID=5543 > PID=0081 > These are all fine. > VID=5543 > PID=0045 > These are not work fine. > Calibration does not been succeed. Ah, so it's UC-Logic. > If you give me some procedure and tools for making tablet and tablet monitor driver. > I would like to make. > Under ubuntu studio 14.04 I don't have a good HOWTO on driver making at the moment, but I plan to make one. I'll start next week and will put it on http://digimend.github.io. Will notify you as soon as anything shows up. > File 1: > VID=5543 > PID=0081 > are work fine. Well, I wouldn't say having to use the WizardPen driver is fine, although it's a good start. Ultimately, a tablet should work without configuration at all and certainly without building and installing a non-standard and hackish X.org driver. Is Ugee 1000L the only tablet with PID=0081? > File 2: > We would like to build for them. Are all the tablets in that Excel file use the same PID=0045? > We are small company of system integrator for creative buginners. > So we need to provide no wacom tablet and ubuntu-studio 14.04 for cost effective in Japan. Yes, that would be a good way to reduce costs. > Ofcource when we made new driver, we will share for everyone. That would be a good thing to do, thank you. Nick On 11/06/2014 07:30 AM, Masaru Hirano wrote: > Hello Nick > > Thanks for your support. > We are Ugee distributer in japan. > Please let us know how to make driver. > > We would like to build ugee tablet driver. > VID=5543 > PID=0081 > These are all fine. > VID=5543 > PID=0045 > These are not work fine. > Calibration does not been succeed. > > If you give me some procedure and tools for making tablet and tablet monitor driver. > I would like to make. > Under ubuntu studio 14.04 > > File 1: > VID=5543 > PID=0081 > are work fine. > > File 2: > We would like to build for them. > > We are small company of system integrator for creative buginners. > So we need to provide no wacom tablet and ubuntu-studio 14.04 for cost effective in Japan. > > Ofcource when we made new driver, we will share for everyone. > > Best regards, > Masaru Hirano > Neoblast Inc. > > On 2014年11月05日 18:24, Nikolai Kondrashov wrote: >> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>> We would appreciate it, if you could provide us with a list of Ugee >>> tablets >>> which you found working with our tablets >> >> I meant "our drivers", of course. >> >> Nick >> >> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>> Hello Masaru, >>> >>> I'm very glad to hear that another tablet distributor is choosing to >>> contribute their effort to making Linux drivers for their tablets. >>> >>> This year Yiynova helped with drivers for their tablets as well, and >>> now have >>> a bunch of models supported. >>> >>> We would appreciate it, if you could provide us with a list of Ugee >>> tablets >>> which you found working with our tablets, along with their USB VID:PID >>> pairs, >>> so we can add them to the list and advertise their support. >>> >>> Regarding the so far unsupported tablets, I would also like to know their >>> names and VID:PID pairs, along with their parameters (if those are >>> unavailable >>> on the web). I would also like to know which hardware they're based >>> on, if >>> possible. Is it UC-Logic, Waltop, anything else? >>> >>> This would get us started. >>> >>> Thank you. >>> >>> Sincerely, >>> Nick >>> >>> On 11/05/2014 03:42 AM, Masaru Hirano wrote: >>>> Hello developper >>>> >>>> We are neoblast inc japan. >>>> We are one of Ugee Distributer. >>>> >>>> There are few driver for ugee. >>>> Most of product work by digemend kernel driver. >>>> But some product (tablet monitor, sketch=pad) do not work. >>>> http://ugee.net/index.asp >>>> >>>> We use ubuntu-studio 14.04. >>>> >>>> Digemend kernel driver are not enough for us. >>>> There are no friver for tablet monitor for ubuntu 14.04. >>>> >>>> We would like to build by ourseleves. >>>> Please let us know how to make kernel driver. >>>> >>>> best regards, >>>> Masaru Hirano >>>> neoblast inc. >> >> >> |
|
From: Masaru H. <mh...@ne...> - 2014-11-07 02:19:40
|
Hello Nick Thanks for helping us. I have tried 3 model of tablet. Tablet monitor, Sketch-pad, Tablet board. Please let me know further instruction. Best regards, Masaru Hirano On 2014年11月06日 18:34, Nikolai Kondrashov wrote: > Hello Masaru, > > On 11/06/2014 07:30 AM, Masaru Hirano wrote: >> Hello Nick >> >> Thanks for your support. >> We are Ugee distributer in japan. >> Please let us know how to make driver. > > First, try to familiarize yourself with the digimend-kernel-drivers source. > Add your tablet product IDs to "huion_devices" and see what happens. > > Use usbhid-dump to check what tablet reports, check files under > /sys/kernel/debug/hid to see how kernel interprets what tablet sends. Use > "evtest" to see what kernel sends to userspace. Use "xinput" to see how > X.org > interprets what kernel sends. Try the above with different tablet models. > > This should make you better prepared to what comes next, while I write > detailed instructions. > >> We would like to build ugee tablet driver. >> VID=5543 >> PID=0081 >> These are all fine. >> VID=5543 >> PID=0045 >> These are not work fine. >> Calibration does not been succeed. > > Ah, so it's UC-Logic. > >> If you give me some procedure and tools for making tablet and tablet >> monitor driver. >> I would like to make. >> Under ubuntu studio 14.04 > > I don't have a good HOWTO on driver making at the moment, but I plan to > make > one. I'll start next week and will put it on http://digimend.github.io. > Will > notify you as soon as anything shows up. > >> File 1: >> VID=5543 >> PID=0081 >> are work fine. > > Well, I wouldn't say having to use the WizardPen driver is fine, > although it's > a good start. Ultimately, a tablet should work without configuration at all > and certainly without building and installing a non-standard and hackish > X.org driver. > > Is Ugee 1000L the only tablet with PID=0081? > >> File 2: >> We would like to build for them. > > Are all the tablets in that Excel file use the same PID=0045? > >> We are small company of system integrator for creative buginners. >> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >> cost effective in Japan. > > Yes, that would be a good way to reduce costs. > >> Ofcource when we made new driver, we will share for everyone. > > That would be a good thing to do, thank you. > > Nick > > On 11/06/2014 07:30 AM, Masaru Hirano wrote: >> Hello Nick >> >> Thanks for your support. >> We are Ugee distributer in japan. >> Please let us know how to make driver. >> >> We would like to build ugee tablet driver. >> VID=5543 >> PID=0081 >> These are all fine. >> VID=5543 >> PID=0045 >> These are not work fine. >> Calibration does not been succeed. >> >> If you give me some procedure and tools for making tablet and tablet >> monitor driver. >> I would like to make. >> Under ubuntu studio 14.04 >> >> File 1: >> VID=5543 >> PID=0081 >> are work fine. >> >> File 2: >> We would like to build for them. >> >> We are small company of system integrator for creative buginners. >> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >> cost effective in Japan. >> >> Ofcource when we made new driver, we will share for everyone. >> >> Best regards, >> Masaru Hirano >> Neoblast Inc. >> >> On 2014年11月05日 18:24, Nikolai Kondrashov wrote: >>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>> We would appreciate it, if you could provide us with a list of Ugee >>>> tablets >>>> which you found working with our tablets >>> >>> I meant "our drivers", of course. >>> >>> Nick >>> >>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>> Hello Masaru, >>>> >>>> I'm very glad to hear that another tablet distributor is choosing to >>>> contribute their effort to making Linux drivers for their tablets. >>>> >>>> This year Yiynova helped with drivers for their tablets as well, and >>>> now have >>>> a bunch of models supported. >>>> >>>> We would appreciate it, if you could provide us with a list of Ugee >>>> tablets >>>> which you found working with our tablets, along with their USB VID:PID >>>> pairs, >>>> so we can add them to the list and advertise their support. >>>> >>>> Regarding the so far unsupported tablets, I would also like to know >>>> their >>>> names and VID:PID pairs, along with their parameters (if those are >>>> unavailable >>>> on the web). I would also like to know which hardware they're based >>>> on, if >>>> possible. Is it UC-Logic, Waltop, anything else? >>>> >>>> This would get us started. >>>> >>>> Thank you. >>>> >>>> Sincerely, >>>> Nick >>>> >>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote: >>>>> Hello developper >>>>> >>>>> We are neoblast inc japan. >>>>> We are one of Ugee Distributer. >>>>> >>>>> There are few driver for ugee. >>>>> Most of product work by digemend kernel driver. >>>>> But some product (tablet monitor, sketch=pad) do not work. >>>>> http://ugee.net/index.asp >>>>> >>>>> We use ubuntu-studio 14.04. >>>>> >>>>> Digemend kernel driver are not enough for us. >>>>> There are no friver for tablet monitor for ubuntu 14.04. >>>>> >>>>> We would like to build by ourseleves. >>>>> Please let us know how to make kernel driver. >>>>> >>>>> best regards, >>>>> Masaru Hirano >>>>> neoblast inc. >>> >>> >>> > > > |
|
From: Nikolai K. <sp...@gm...> - 2014-11-14 13:21:04
|
Hi Masaru, On 11/07/2014 04:19 AM, Masaru Hirano wrote: > Thanks for helping us. > I have tried 3 model of tablet. > Tablet monitor, Sketch-pad, Tablet board. > Please let me know further instruction. I caught a cold and won't be able to finish a HOWTO for you this week. Perhaps the next week will be better. Meanwhile I can suggest reading at least the first few chapters to the HID spec: http://www.usb.org/developers/hidpage/HID1_11.pdf Nick On 11/07/2014 04:19 AM, Masaru Hirano wrote: > Hello Nick > > Thanks for helping us. > I have tried 3 model of tablet. > Tablet monitor, Sketch-pad, Tablet board. > Please let me know further instruction. > > Best regards, > Masaru Hirano > On 2014年11月06日 18:34, Nikolai Kondrashov wrote: >> Hello Masaru, >> >> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>> Hello Nick >>> >>> Thanks for your support. >>> We are Ugee distributer in japan. >>> Please let us know how to make driver. >> >> First, try to familiarize yourself with the digimend-kernel-drivers source. >> Add your tablet product IDs to "huion_devices" and see what happens. >> >> Use usbhid-dump to check what tablet reports, check files under >> /sys/kernel/debug/hid to see how kernel interprets what tablet sends. Use >> "evtest" to see what kernel sends to userspace. Use "xinput" to see how >> X.org >> interprets what kernel sends. Try the above with different tablet models. >> >> This should make you better prepared to what comes next, while I write >> detailed instructions. >> >>> We would like to build ugee tablet driver. >>> VID=5543 >>> PID=0081 >>> These are all fine. >>> VID=5543 >>> PID=0045 >>> These are not work fine. >>> Calibration does not been succeed. >> >> Ah, so it's UC-Logic. >> >>> If you give me some procedure and tools for making tablet and tablet >>> monitor driver. >>> I would like to make. >>> Under ubuntu studio 14.04 >> >> I don't have a good HOWTO on driver making at the moment, but I plan to >> make >> one. I'll start next week and will put it on http://digimend.github.io. >> Will >> notify you as soon as anything shows up. >> >>> File 1: >>> VID=5543 >>> PID=0081 >>> are work fine. >> >> Well, I wouldn't say having to use the WizardPen driver is fine, >> although it's >> a good start. Ultimately, a tablet should work without configuration at all >> and certainly without building and installing a non-standard and hackish >> X.org driver. >> >> Is Ugee 1000L the only tablet with PID=0081? >> >>> File 2: >>> We would like to build for them. >> >> Are all the tablets in that Excel file use the same PID=0045? >> >>> We are small company of system integrator for creative buginners. >>> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >>> cost effective in Japan. >> >> Yes, that would be a good way to reduce costs. >> >>> Ofcource when we made new driver, we will share for everyone. >> >> That would be a good thing to do, thank you. >> >> Nick >> >> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>> Hello Nick >>> >>> Thanks for your support. >>> We are Ugee distributer in japan. >>> Please let us know how to make driver. >>> >>> We would like to build ugee tablet driver. >>> VID=5543 >>> PID=0081 >>> These are all fine. >>> VID=5543 >>> PID=0045 >>> These are not work fine. >>> Calibration does not been succeed. >>> >>> If you give me some procedure and tools for making tablet and tablet >>> monitor driver. >>> I would like to make. >>> Under ubuntu studio 14.04 >>> >>> File 1: >>> VID=5543 >>> PID=0081 >>> are work fine. >>> >>> File 2: >>> We would like to build for them. >>> >>> We are small company of system integrator for creative buginners. >>> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >>> cost effective in Japan. >>> >>> Ofcource when we made new driver, we will share for everyone. >>> >>> Best regards, >>> Masaru Hirano >>> Neoblast Inc. >>> >>> On 2014年11月05日 18:24, Nikolai Kondrashov wrote: >>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>> tablets >>>>> which you found working with our tablets >>>> >>>> I meant "our drivers", of course. >>>> >>>> Nick >>>> >>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>> Hello Masaru, >>>>> >>>>> I'm very glad to hear that another tablet distributor is choosing to >>>>> contribute their effort to making Linux drivers for their tablets. >>>>> >>>>> This year Yiynova helped with drivers for their tablets as well, and >>>>> now have >>>>> a bunch of models supported. >>>>> >>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>> tablets >>>>> which you found working with our tablets, along with their USB VID:PID >>>>> pairs, >>>>> so we can add them to the list and advertise their support. >>>>> >>>>> Regarding the so far unsupported tablets, I would also like to know >>>>> their >>>>> names and VID:PID pairs, along with their parameters (if those are >>>>> unavailable >>>>> on the web). I would also like to know which hardware they're based >>>>> on, if >>>>> possible. Is it UC-Logic, Waltop, anything else? >>>>> >>>>> This would get us started. >>>>> >>>>> Thank you. >>>>> >>>>> Sincerely, >>>>> Nick >>>>> >>>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote: >>>>>> Hello developper >>>>>> >>>>>> We are neoblast inc japan. >>>>>> We are one of Ugee Distributer. >>>>>> >>>>>> There are few driver for ugee. >>>>>> Most of product work by digemend kernel driver. >>>>>> But some product (tablet monitor, sketch=pad) do not work. >>>>>> http://ugee.net/index.asp >>>>>> >>>>>> We use ubuntu-studio 14.04. >>>>>> >>>>>> Digemend kernel driver are not enough for us. >>>>>> There are no friver for tablet monitor for ubuntu 14.04. >>>>>> >>>>>> We would like to build by ourseleves. >>>>>> Please let us know how to make kernel driver. >>>>>> >>>>>> best regards, >>>>>> Masaru Hirano >>>>>> neoblast inc. >>>> >>>> >>>> >> >> >> |
|
From: Masaru H. <mh...@ne...> - 2014-11-20 00:59:27
|
Hello Nick Thanks for your information. How are you feeling? Are you Ok from cold. I have read the page 1 to 20 to understand easily. Thanks for your informations. I would like to build for Ugee products to sell in japan. Please help us. regards, Masaru Hirano On 2014年11月14日 22:20, Nikolai Kondrashov wrote: > Hi Masaru, > > On 11/07/2014 04:19 AM, Masaru Hirano wrote: >> Thanks for helping us. >> I have tried 3 model of tablet. >> Tablet monitor, Sketch-pad, Tablet board. >> Please let me know further instruction. > > I caught a cold and won't be able to finish a HOWTO for you this week. > Perhaps the next week will be better. > > Meanwhile I can suggest reading at least the first few chapters to the HID > spec: > > http://www.usb.org/developers/hidpage/HID1_11.pdf > > Nick > > On 11/07/2014 04:19 AM, Masaru Hirano wrote: >> Hello Nick >> >> Thanks for helping us. >> I have tried 3 model of tablet. >> Tablet monitor, Sketch-pad, Tablet board. >> Please let me know further instruction. >> >> Best regards, >> Masaru Hirano >> On 2014年11月06日 18:34, Nikolai Kondrashov wrote: >>> Hello Masaru, >>> >>> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>>> Hello Nick >>>> >>>> Thanks for your support. >>>> We are Ugee distributer in japan. >>>> Please let us know how to make driver. >>> >>> First, try to familiarize yourself with the digimend-kernel-drivers >>> source. >>> Add your tablet product IDs to "huion_devices" and see what happens. >>> >>> Use usbhid-dump to check what tablet reports, check files under >>> /sys/kernel/debug/hid to see how kernel interprets what tablet sends. >>> Use >>> "evtest" to see what kernel sends to userspace. Use "xinput" to see how >>> X.org >>> interprets what kernel sends. Try the above with different tablet >>> models. >>> >>> This should make you better prepared to what comes next, while I write >>> detailed instructions. >>> >>>> We would like to build ugee tablet driver. >>>> VID=5543 >>>> PID=0081 >>>> These are all fine. >>>> VID=5543 >>>> PID=0045 >>>> These are not work fine. >>>> Calibration does not been succeed. >>> >>> Ah, so it's UC-Logic. >>> >>>> If you give me some procedure and tools for making tablet and tablet >>>> monitor driver. >>>> I would like to make. >>>> Under ubuntu studio 14.04 >>> >>> I don't have a good HOWTO on driver making at the moment, but I plan to >>> make >>> one. I'll start next week and will put it on http://digimend.github.io. >>> Will >>> notify you as soon as anything shows up. >>> >>>> File 1: >>>> VID=5543 >>>> PID=0081 >>>> are work fine. >>> >>> Well, I wouldn't say having to use the WizardPen driver is fine, >>> although it's >>> a good start. Ultimately, a tablet should work without configuration >>> at all >>> and certainly without building and installing a non-standard and hackish >>> X.org driver. >>> >>> Is Ugee 1000L the only tablet with PID=0081? >>> >>>> File 2: >>>> We would like to build for them. >>> >>> Are all the tablets in that Excel file use the same PID=0045? >>> >>>> We are small company of system integrator for creative buginners. >>>> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >>>> cost effective in Japan. >>> >>> Yes, that would be a good way to reduce costs. >>> >>>> Ofcource when we made new driver, we will share for everyone. >>> >>> That would be a good thing to do, thank you. >>> >>> Nick >>> >>> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>>> Hello Nick >>>> >>>> Thanks for your support. >>>> We are Ugee distributer in japan. >>>> Please let us know how to make driver. >>>> >>>> We would like to build ugee tablet driver. >>>> VID=5543 >>>> PID=0081 >>>> These are all fine. >>>> VID=5543 >>>> PID=0045 >>>> These are not work fine. >>>> Calibration does not been succeed. >>>> >>>> If you give me some procedure and tools for making tablet and tablet >>>> monitor driver. >>>> I would like to make. >>>> Under ubuntu studio 14.04 >>>> >>>> File 1: >>>> VID=5543 >>>> PID=0081 >>>> are work fine. >>>> >>>> File 2: >>>> We would like to build for them. >>>> >>>> We are small company of system integrator for creative buginners. >>>> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >>>> cost effective in Japan. >>>> >>>> Ofcource when we made new driver, we will share for everyone. >>>> >>>> Best regards, >>>> Masaru Hirano >>>> Neoblast Inc. >>>> >>>> On 2014年11月05日 18:24, Nikolai Kondrashov wrote: >>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>>> tablets >>>>>> which you found working with our tablets >>>>> >>>>> I meant "our drivers", of course. >>>>> >>>>> Nick >>>>> >>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>>> Hello Masaru, >>>>>> >>>>>> I'm very glad to hear that another tablet distributor is choosing to >>>>>> contribute their effort to making Linux drivers for their tablets. >>>>>> >>>>>> This year Yiynova helped with drivers for their tablets as well, and >>>>>> now have >>>>>> a bunch of models supported. >>>>>> >>>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>>> tablets >>>>>> which you found working with our tablets, along with their USB >>>>>> VID:PID >>>>>> pairs, >>>>>> so we can add them to the list and advertise their support. >>>>>> >>>>>> Regarding the so far unsupported tablets, I would also like to know >>>>>> their >>>>>> names and VID:PID pairs, along with their parameters (if those are >>>>>> unavailable >>>>>> on the web). I would also like to know which hardware they're based >>>>>> on, if >>>>>> possible. Is it UC-Logic, Waltop, anything else? >>>>>> >>>>>> This would get us started. >>>>>> >>>>>> Thank you. >>>>>> >>>>>> Sincerely, >>>>>> Nick >>>>>> >>>>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote: >>>>>>> Hello developper >>>>>>> >>>>>>> We are neoblast inc japan. >>>>>>> We are one of Ugee Distributer. >>>>>>> >>>>>>> There are few driver for ugee. >>>>>>> Most of product work by digemend kernel driver. >>>>>>> But some product (tablet monitor, sketch=pad) do not work. >>>>>>> http://ugee.net/index.asp >>>>>>> >>>>>>> We use ubuntu-studio 14.04. >>>>>>> >>>>>>> Digemend kernel driver are not enough for us. >>>>>>> There are no friver for tablet monitor for ubuntu 14.04. >>>>>>> >>>>>>> We would like to build by ourseleves. >>>>>>> Please let us know how to make kernel driver. >>>>>>> >>>>>>> best regards, >>>>>>> Masaru Hirano >>>>>>> neoblast inc. >>>>> >>>>> >>>>> >>> >>> >>> > > > -- ========================================= Masaru Hirano Neoblast Inc. Tokiwadai1-67-5-704, Itabashi-ku, Tokyo, Japan ZIP:174-0071 E-Mail:mh...@ne... Tel:+81-3-4570-7345 Mob:+81-70-6575-1732 Fax:+81-20-4623-9249 ========================================= |
|
From: Nikolai K. <sp...@gm...> - 2014-11-23 15:01:49
|
Hello Masaru, On 11/20/2014 02:59 AM, Masaru Hirano wrote: > Hello Nick > > Thanks for your information. > > How are you feeling? > Are you Ok from cold. I'm mostly fine now, thank you. However my daughter has developed some health issues and we needed to spend much time dealing with them. It is better now, but not over yet. > I have read the page 1 to 20 to understand easily. > Thanks for your informations. Glad to hear it was easy for you. I can suggest studying usbhid-dump further, accompanied by hidrd-convert, with regards to what you learned/can learn from the HID spec and examining how your tablets work. Also, try using huion-probe with them and see if it works/outputs anything which huion-decode can process. See these links: https://github.com/DIGImend/usbhid-dump https://github.com/DIGImend/hidrd https://github.com/DIGImend/huion-tools > I would like to build for Ugee products to sell in japan. > Please help us. I'll try to put some hours into that in the coming week, although I'll need to catch up with my primary job as well and it won't be easy. Nick On 11/20/2014 02:59 AM, Masaru Hirano wrote: > Hello Nick > > Thanks for your information. > > How are you feeling? > Are you Ok from cold. > > I have read the page 1 to 20 to understand easily. > Thanks for your informations. > > I would like to build for Ugee products to sell in japan. > Please help us. > > regards, > Masaru Hirano > > On 2014年11月14日 22:20, Nikolai Kondrashov wrote: >> Hi Masaru, >> >> On 11/07/2014 04:19 AM, Masaru Hirano wrote: >>> Thanks for helping us. >>> I have tried 3 model of tablet. >>> Tablet monitor, Sketch-pad, Tablet board. >>> Please let me know further instruction. >> >> I caught a cold and won't be able to finish a HOWTO for you this week. >> Perhaps the next week will be better. >> >> Meanwhile I can suggest reading at least the first few chapters to the HID >> spec: >> >> http://www.usb.org/developers/hidpage/HID1_11.pdf >> >> Nick >> >> On 11/07/2014 04:19 AM, Masaru Hirano wrote: >>> Hello Nick >>> >>> Thanks for helping us. >>> I have tried 3 model of tablet. >>> Tablet monitor, Sketch-pad, Tablet board. >>> Please let me know further instruction. >>> >>> Best regards, >>> Masaru Hirano >>> On 2014年11月06日 18:34, Nikolai Kondrashov wrote: >>>> Hello Masaru, >>>> >>>> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>>>> Hello Nick >>>>> >>>>> Thanks for your support. >>>>> We are Ugee distributer in japan. >>>>> Please let us know how to make driver. >>>> >>>> First, try to familiarize yourself with the digimend-kernel-drivers >>>> source. >>>> Add your tablet product IDs to "huion_devices" and see what happens. >>>> >>>> Use usbhid-dump to check what tablet reports, check files under >>>> /sys/kernel/debug/hid to see how kernel interprets what tablet sends. >>>> Use >>>> "evtest" to see what kernel sends to userspace. Use "xinput" to see how >>>> X.org >>>> interprets what kernel sends. Try the above with different tablet >>>> models. >>>> >>>> This should make you better prepared to what comes next, while I write >>>> detailed instructions. >>>> >>>>> We would like to build ugee tablet driver. >>>>> VID=5543 >>>>> PID=0081 >>>>> These are all fine. >>>>> VID=5543 >>>>> PID=0045 >>>>> These are not work fine. >>>>> Calibration does not been succeed. >>>> >>>> Ah, so it's UC-Logic. >>>> >>>>> If you give me some procedure and tools for making tablet and tablet >>>>> monitor driver. >>>>> I would like to make. >>>>> Under ubuntu studio 14.04 >>>> >>>> I don't have a good HOWTO on driver making at the moment, but I plan to >>>> make >>>> one. I'll start next week and will put it on http://digimend.github.io. >>>> Will >>>> notify you as soon as anything shows up. >>>> >>>>> File 1: >>>>> VID=5543 >>>>> PID=0081 >>>>> are work fine. >>>> >>>> Well, I wouldn't say having to use the WizardPen driver is fine, >>>> although it's >>>> a good start. Ultimately, a tablet should work without configuration >>>> at all >>>> and certainly without building and installing a non-standard and hackish >>>> X.org driver. >>>> >>>> Is Ugee 1000L the only tablet with PID=0081? >>>> >>>>> File 2: >>>>> We would like to build for them. >>>> >>>> Are all the tablets in that Excel file use the same PID=0045? >>>> >>>>> We are small company of system integrator for creative buginners. >>>>> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >>>>> cost effective in Japan. >>>> >>>> Yes, that would be a good way to reduce costs. >>>> >>>>> Ofcource when we made new driver, we will share for everyone. >>>> >>>> That would be a good thing to do, thank you. >>>> >>>> Nick >>>> >>>> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>>>> Hello Nick >>>>> >>>>> Thanks for your support. >>>>> We are Ugee distributer in japan. >>>>> Please let us know how to make driver. >>>>> >>>>> We would like to build ugee tablet driver. >>>>> VID=5543 >>>>> PID=0081 >>>>> These are all fine. >>>>> VID=5543 >>>>> PID=0045 >>>>> These are not work fine. >>>>> Calibration does not been succeed. >>>>> >>>>> If you give me some procedure and tools for making tablet and tablet >>>>> monitor driver. >>>>> I would like to make. >>>>> Under ubuntu studio 14.04 >>>>> >>>>> File 1: >>>>> VID=5543 >>>>> PID=0081 >>>>> are work fine. >>>>> >>>>> File 2: >>>>> We would like to build for them. >>>>> >>>>> We are small company of system integrator for creative buginners. >>>>> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >>>>> cost effective in Japan. >>>>> >>>>> Ofcource when we made new driver, we will share for everyone. >>>>> >>>>> Best regards, >>>>> Masaru Hirano >>>>> Neoblast Inc. >>>>> >>>>> On 2014年11月05日 18:24, Nikolai Kondrashov wrote: >>>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>>>> tablets >>>>>>> which you found working with our tablets >>>>>> >>>>>> I meant "our drivers", of course. >>>>>> >>>>>> Nick >>>>>> >>>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>>>> Hello Masaru, >>>>>>> >>>>>>> I'm very glad to hear that another tablet distributor is choosing to >>>>>>> contribute their effort to making Linux drivers for their tablets. >>>>>>> >>>>>>> This year Yiynova helped with drivers for their tablets as well, and >>>>>>> now have >>>>>>> a bunch of models supported. >>>>>>> >>>>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>>>> tablets >>>>>>> which you found working with our tablets, along with their USB >>>>>>> VID:PID >>>>>>> pairs, >>>>>>> so we can add them to the list and advertise their support. >>>>>>> >>>>>>> Regarding the so far unsupported tablets, I would also like to know >>>>>>> their >>>>>>> names and VID:PID pairs, along with their parameters (if those are >>>>>>> unavailable >>>>>>> on the web). I would also like to know which hardware they're based >>>>>>> on, if >>>>>>> possible. Is it UC-Logic, Waltop, anything else? >>>>>>> >>>>>>> This would get us started. >>>>>>> >>>>>>> Thank you. >>>>>>> >>>>>>> Sincerely, >>>>>>> Nick >>>>>>> >>>>>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote: >>>>>>>> Hello developper >>>>>>>> >>>>>>>> We are neoblast inc japan. >>>>>>>> We are one of Ugee Distributer. >>>>>>>> >>>>>>>> There are few driver for ugee. >>>>>>>> Most of product work by digemend kernel driver. >>>>>>>> But some product (tablet monitor, sketch=pad) do not work. >>>>>>>> http://ugee.net/index.asp >>>>>>>> >>>>>>>> We use ubuntu-studio 14.04. >>>>>>>> >>>>>>>> Digemend kernel driver are not enough for us. >>>>>>>> There are no friver for tablet monitor for ubuntu 14.04. >>>>>>>> >>>>>>>> We would like to build by ourseleves. >>>>>>>> Please let us know how to make kernel driver. >>>>>>>> >>>>>>>> best regards, >>>>>>>> Masaru Hirano >>>>>>>> neoblast inc. >>>>>> >>>>>> >>>>>> >>>> >>>> >>>> >> >> >> > |
|
From: Nikolai K. <sp...@gm...> - 2014-12-14 17:00:14
|
Hi Masaru, On 11/06/2014 07:30 AM, Masaru Hirano wrote: > Hello Nick > > Thanks for your support. > We are Ugee distributer in japan. > Please let us know how to make driver. > > We would like to build ugee tablet driver. > VID=5543 > PID=0081 > These are all fine. > VID=5543 > PID=0045 > These are not work fine. > Calibration does not been succeed. I've made a very simple change to the digimend-kernel-drivers package, which has a slight possibility of making them work. I've simply added both of the product IDs you sent to the list of devices supported by the hid-huion driver, so it would treat them exactly as Huion tablets. The change is available in the "ugee" branch on GitHub, which you can download here: https://github.com/DIGImend/digimend-kernel-drivers/archive/ugee.zip Please try building, installing and using the driver with your tablets. We might just be lucky and they might work. Nick On 11/06/2014 07:30 AM, Masaru Hirano wrote: > Hello Nick > > Thanks for your support. > We are Ugee distributer in japan. > Please let us know how to make driver. > > We would like to build ugee tablet driver. > VID=5543 > PID=0081 > These are all fine. > VID=5543 > PID=0045 > These are not work fine. > Calibration does not been succeed. > > If you give me some procedure and tools for making tablet and tablet monitor driver. > I would like to make. > Under ubuntu studio 14.04 > > File 1: > VID=5543 > PID=0081 > are work fine. > > File 2: > We would like to build for them. > > We are small company of system integrator for creative buginners. > So we need to provide no wacom tablet and ubuntu-studio 14.04 for cost effective in Japan. > > Ofcource when we made new driver, we will share for everyone. > > Best regards, > Masaru Hirano > Neoblast Inc. > > On 2014年11月05日 18:24, Nikolai Kondrashov wrote: >> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>> We would appreciate it, if you could provide us with a list of Ugee >>> tablets >>> which you found working with our tablets >> >> I meant "our drivers", of course. >> >> Nick >> >> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>> Hello Masaru, >>> >>> I'm very glad to hear that another tablet distributor is choosing to >>> contribute their effort to making Linux drivers for their tablets. >>> >>> This year Yiynova helped with drivers for their tablets as well, and >>> now have >>> a bunch of models supported. >>> >>> We would appreciate it, if you could provide us with a list of Ugee >>> tablets >>> which you found working with our tablets, along with their USB VID:PID >>> pairs, >>> so we can add them to the list and advertise their support. >>> >>> Regarding the so far unsupported tablets, I would also like to know their >>> names and VID:PID pairs, along with their parameters (if those are >>> unavailable >>> on the web). I would also like to know which hardware they're based >>> on, if >>> possible. Is it UC-Logic, Waltop, anything else? >>> >>> This would get us started. >>> >>> Thank you. >>> >>> Sincerely, >>> Nick >>> >>> On 11/05/2014 03:42 AM, Masaru Hirano wrote: >>>> Hello developper >>>> >>>> We are neoblast inc japan. >>>> We are one of Ugee Distributer. >>>> >>>> There are few driver for ugee. >>>> Most of product work by digemend kernel driver. >>>> But some product (tablet monitor, sketch=pad) do not work. >>>> http://ugee.net/index.asp >>>> >>>> We use ubuntu-studio 14.04. >>>> >>>> Digemend kernel driver are not enough for us. >>>> There are no friver for tablet monitor for ubuntu 14.04. >>>> >>>> We would like to build by ourseleves. >>>> Please let us know how to make kernel driver. >>>> >>>> best regards, >>>> Masaru Hirano >>>> neoblast inc. >> >> >> |
|
From: Masaru H. <mh...@ne...> - 2014-12-30 11:11:45
|
Hello Nick
Thanks for your new driver.
Ugee-1000-L works fine.
According to change of this case.
I could found 4 changes by sources.
But I can not adopt for other model.
Please teach me how to fit for other models.
All the product uses UC-LOGIC
1.hid-huion.c
these two codes are added.
line228:
case USB_DEVICE_ID_UGEE_TABLET_81:
line229:
case USB_DEVICE_ID_UGEE_TABLET_45:
2.hid-hion.c
these two codes are added.
line275:
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_81) },
line276:
{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_45) },
3.hid-ids.h
these two codes are added.
line:22
#define USB_DEVICE_ID_UGEE_TABLET_81 0x0081
line:22
#define USB_DEVICE_ID_UGEE_TABLET_45 0x0045
So I have tried same way.
Ugee-M708 model
But this model does not work correctry.
Please teach me how to add other model.
M708 Model diagnostic files are attathched.
This case strange output
$xinput list > xinputlist.txt
UC-LOIC is strange.
$ xinput list
⎡ Virtual core pointer id=2 [master pointer (2)]
⎜ ↳ UC-LOIC TABLET 1060 id=10 [slave pointer (2)]
⎜ ↳ UC-LOIC TABLET 1060 id=11 [slave pointer (2)]
⎜ ↳ UC-LOIC TABLET 1060 id=12 [slave pointer (2)]
I have tried M708 model diagnostic.
According to these way
http://digimend.github.io/support/howto/trbl/diagnostics/
1.Identify original model
$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp.
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 003: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse
Bus 006 Device 002: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
VID=5543
PID=0081
$ T=5543:0081
2.Retrieve USB descriptors
1)sudo lsusb -v -d $T > descriptors.txt
Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x5543 UC-Logic Technology Corp.
idProduct 0x0081
bcdDevice 0.00
iManufacturer 5 UC-LOIC
iProduct 6 TABLET 1060
iSerial 0
bNumConfigurations 1
^C
2) sudo usbhid-dump -ed -m $T > hid_report_descriptors.txt
Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x5543 UC-Logic Technology Corp.
idProduct 0x0081
bcdDevice 0.00
iManufacturer 5 UC-LOIC
iProduct 6 TABLET 1060
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
^C
3.Collect raw input samples
sudo usbhid-dump -es -m $T | tee frame_wheel_srolling.txt
007:002:000:STREAM 1418797530.559580
07 80 84 01 75 01 00 00
007:002:000:STREAM 1418797530.565550
07 80 8B 01 6F 01 00 00
007:002:000:STREAM 1418797530.573564
07 80 94 01 68 01 00 00
007:002:000:STREAM 1418797530.579546
07 81 A0 01 5F 01 89 00
^C
4.PEN
$ sudo usbhid-dump -es -m $T | tee pen_coords.txt
4-1)Pen-Coordinate
07 80 82 55 F7 5A 00 00
007:002:000:STREAM 1418797673.689610
07 80 89 55 E0 5A 00 00
007:002:000:STREAM 1418797673.695597
07 80 91 55 C7 5A 00 00
007:002:000:STREAM 1418797673.699593
07 80 98 55 AD 5A 00 00
007:002:000:STREAM 1418797673.705596
07 80 9E 55 93 5A 00 00
^C
4-2)Pen-Tiltangle
$ sudo usbhid-dump -es -m $T | tee pen_tilt.txt
Not Supported and skip
4-3)Pen-Pressure
sudo usbhid-dump -es -m $T | tee pen_pressure.txt
007:002:000:STREAM 1418797836.355686
07 80 2A 56 48 2D 00 00
007:002:000:STREAM 1418797836.477668
07 80 41 56 48 2D 00 00
007:002:000:STREAM 1418797836.509667
07 80 58 56 48 2D 00 00
007:002:000:STREAM 1418797836.535662
07 80 6B 56 48 2D 00 00
^C
4-4)Pen-Buttons
sudo usbhid-dump -es -m $T | tee pen_buttons.txt
007:002:000:STREAM 1418797957.023720
07 80 9D 3C 37 2B 00 00
007:002:000:STREAM 1418797957.169706
07 80 BD 3C 37 2B 00 00
007:002:000:STREAM 1418797957.547704
07 80 BD 3C 56 2B 00 00
007:002:000:STREAM 1418797957.831697
07 80 DC 3C 56 2B 00 00
007:002:000:STREAM 1418797957.855690
07 80 FC 3C 56 2B 00 00
007:002:000:STREAM 1418797957.871695
07 80 16 3D 56 2B 00 00
007:002:000:STREAM 1418797957.913699
07 80 2E 3D 56 2B 00 00
5 Frame Controls
5-1)Frame Controls Dials
sudo usbhid-dump -es -m $T | tee frame_dials.txt
Not Supported and skip
5-1)Frame Controls Buttons
$ sudo usbhid-dump -es -m $T | tee frame_buttons.txt
007:002:002:STREAM 1418798804.272982
03 04 3D 00 00 00 00 00
007:002:002:STREAM 1418798804.792976
03 00 00 00 00 00 00 00
007:002:002:STREAM 1418798806.040974
03 01 16 00 00 00 00 00
007:002:002:STREAM 1418798806.496976
03 00 00 00 00 00 00 00
007:002:002:STREAM 1418798807.552979
03 02 56 00 00 00 00 00
^C
6.Mouse
6-1)Mouse-Coordinates
$ sudo usbhid-dump -es -m $T | tee mouse_coords.txt
Not Supported and skip
6-2)Mouse-Buttons
$ sudo usbhid-dump -es -m $T | tee mouse_buttons.txt
Not Supported and skip
6-3)Mouse-Wheel
$ sudo usbhid-dump -es -m $T | tee mouse_wheel.txt
Not Supported and skip
7.huion-probe
7-1)Identify original model
$ lsusb > identmodel.txt
Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp.
bus=7
device=2
7-2)huion-probe
$ sudo huion-probe 7 2 > ~/huionprobe.txt
M 55 00 43 00 2D 00 4C 00 4F 00 49 00 43 00 00 00
P 54 00 41 00 42 00 4C 00 45 00 54 00 20 00 31 00 30 00 36 00 30 00
S 64 0E 03 40 9C C0 5D 03 00 FF 07 A0 0F 08 00
S 65 04 03 20 A0
S 6E 04 03 30 00
S 79 28 03 44 00 46 00 53 00 2D 00 55 00 49 00 20 00 46 00 34 00 30 00
31 00 2D 00 32 00 30 00 31 00 31 00 31 00 30 00 32 00
S 7A 08 03 01 08 00 00 00 00
7-2)huion-decode
$ sudo huion-probe 6 3 | huion-decode > ~/huiondecode.txt
Manufacturer: UC-LOIC?
Product: TABLET 1060
Max X: 40000
Max Y: 24000
Max pressure: 2047
Resolution: 4000
Internal model: DFS-UI F401-2011102
7-2)Calculation
Active Area 10"x6"
MaxX / Width = MaxY / Height = Resolution
*40000/Width =4000
hence Width=10
*24000/Height=4000
hence Height=6
Best regards,
Masaru Hirano
Neoblast Inc.
On 2014年12月15日 02:00, Nikolai Kondrashov wrote:
> Hi Masaru,
>
> On 11/06/2014 07:30 AM, Masaru Hirano wrote:
>> Hello Nick
>>
>> Thanks for your support.
>> We are Ugee distributer in japan.
>> Please let us know how to make driver.
>>
>> We would like to build ugee tablet driver.
>> VID=5543
>> PID=0081
>> These are all fine.
>> VID=5543
>> PID=0045
>> These are not work fine.
>> Calibration does not been succeed.
>
> I've made a very simple change to the digimend-kernel-drivers package,
> which
> has a slight possibility of making them work. I've simply added both of the
> product IDs you sent to the list of devices supported by the hid-huion
> driver,
> so it would treat them exactly as Huion tablets.
>
> The change is available in the "ugee" branch on GitHub, which you can
> download
> here: https://github.com/DIGImend/digimend-kernel-drivers/archive/ugee.zip
>
> Please try building, installing and using the driver with your tablets. We
> might just be lucky and they might work.
>
> Nick
>
> On 11/06/2014 07:30 AM, Masaru Hirano wrote:
>> Hello Nick
>>
>> Thanks for your support.
>> We are Ugee distributer in japan.
>> Please let us know how to make driver.
>>
>> We would like to build ugee tablet driver.
>> VID=5543
>> PID=0081
>> These are all fine.
>> VID=5543
>> PID=0045
>> These are not work fine.
>> Calibration does not been succeed.
>>
>> If you give me some procedure and tools for making tablet and tablet
>> monitor driver.
>> I would like to make.
>> Under ubuntu studio 14.04
>>
>> File 1:
>> VID=5543
>> PID=0081
>> are work fine.
>>
>> File 2:
>> We would like to build for them.
>>
>> We are small company of system integrator for creative buginners.
>> So we need to provide no wacom tablet and ubuntu-studio 14.04 for
>> cost effective in Japan.
>>
>> Ofcource when we made new driver, we will share for everyone.
>>
>> Best regards,
>> Masaru Hirano
>> Neoblast Inc.
>>
>> On 2014年11月05日 18:24, Nikolai Kondrashov wrote:
>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote:
>>>> We would appreciate it, if you could provide us with a list of Ugee
>>>> tablets
>>>> which you found working with our tablets
>>>
>>> I meant "our drivers", of course.
>>>
>>> Nick
>>>
>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote:
>>>> Hello Masaru,
>>>>
>>>> I'm very glad to hear that another tablet distributor is choosing to
>>>> contribute their effort to making Linux drivers for their tablets.
>>>>
>>>> This year Yiynova helped with drivers for their tablets as well, and
>>>> now have
>>>> a bunch of models supported.
>>>>
>>>> We would appreciate it, if you could provide us with a list of Ugee
>>>> tablets
>>>> which you found working with our tablets, along with their USB VID:PID
>>>> pairs,
>>>> so we can add them to the list and advertise their support.
>>>>
>>>> Regarding the so far unsupported tablets, I would also like to know
>>>> their
>>>> names and VID:PID pairs, along with their parameters (if those are
>>>> unavailable
>>>> on the web). I would also like to know which hardware they're based
>>>> on, if
>>>> possible. Is it UC-Logic, Waltop, anything else?
>>>>
>>>> This would get us started.
>>>>
>>>> Thank you.
>>>>
>>>> Sincerely,
>>>> Nick
>>>>
>>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote:
>>>>> Hello developper
>>>>>
>>>>> We are neoblast inc japan.
>>>>> We are one of Ugee Distributer.
>>>>>
>>>>> There are few driver for ugee.
>>>>> Most of product work by digemend kernel driver.
>>>>> But some product (tablet monitor, sketch=pad) do not work.
>>>>> http://ugee.net/index.asp
>>>>>
>>>>> We use ubuntu-studio 14.04.
>>>>>
>>>>> Digemend kernel driver are not enough for us.
>>>>> There are no friver for tablet monitor for ubuntu 14.04.
>>>>>
>>>>> We would like to build by ourseleves.
>>>>> Please let us know how to make kernel driver.
>>>>>
>>>>> best regards,
>>>>> Masaru Hirano
>>>>> neoblast inc.
>>>
>>>
>>>
>
>
>
--
=========================================
Masaru Hirano
Neoblast Inc.
Tokiwadai1-67-5-704, Itabashi-ku, Tokyo, Japan
ZIP:174-0071
E-Mail:mh...@ne...
Tel:+81-3-4570-7345
Mob:+81-70-6575-1732
Fax:+81-20-4623-9249
=========================================
|
|
From: Nikolai K. <sp...@gm...> - 2014-12-31 16:19:48
|
Hi Masaru, On 12/30/2014 12:44 PM, Masaru Hirano wrote: > Thanks for your new driver. > Ugee-1000-L works fine. Good. How did you verify it exactly? Could you please provide evtest dumps of the pen coords test? Did you have any special X.org configuration, like using the WizardPen driver? > According to change of this case. > I could found 4 changes by sources. > But I can not adopt for other model. > Please teach me how to fit for other models. > All the product uses UC-LOGIC I assumed that all your models have the UC-Logic vendor ID (0x5543) and either the 0x45 or 0x81 product ID. If that's so, the driver should attempt to handle all of them and no further code change should be necessary. Do you have tablets with other VID:PID pairs? > So I have tried same way. > Ugee-M708 model > But this model does not work correctry. > Please teach me how to add other model. > M708 Model diagnostic files are attathched. > This case strange output > $xinput list > xinputlist.txt > UC-LOIC is strange. "UC-LOIC" is a typo on behalf of the manufacturer. It's what they've put into their device and string descriptors themselves. > $ xinput list > ⎡ Virtual core pointer id=2 [master pointer (2)] > ⎜ ↳ UC-LOIC TABLET 1060 id=10 [slave pointer (2)] > ⎜ ↳ UC-LOIC TABLET 1060 id=11 [slave pointer (2)] > ⎜ ↳ UC-LOIC TABLET 1060 id=12 [slave pointer (2)] > > I have tried M708 model diagnostic. Were these diagnostic files collected with the driver installed? The tablet should work fine as the coordinate range seems to be full and correct. Do you, by any chance, still use the WizardPen driver? Could you please provide evtest dumps of the pen coords test for this tablet as well? Nick On 12/30/2014 12:44 PM, Masaru Hirano wrote: > Hello Nick > > Thanks for your new driver. > Ugee-1000-L works fine. > > According to change of this case. > I could found 4 changes by sources. > But I can not adopt for other model. > Please teach me how to fit for other models. > All the product uses UC-LOGIC > > 1.hid-huion.c > these two codes are added. > > line228: > case USB_DEVICE_ID_UGEE_TABLET_81: > line229: > case USB_DEVICE_ID_UGEE_TABLET_45: > > 2.hid-hion.c > these two codes are added. > line275: > { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_81) }, > > line276: > { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_45) }, > > 3.hid-ids.h > these two codes are added. > line:22 > #define USB_DEVICE_ID_UGEE_TABLET_81 0x0081 > line:22 > #define USB_DEVICE_ID_UGEE_TABLET_45 0x0045 > > So I have tried same way. > Ugee-M708 model > But this model does not work correctry. > Please teach me how to add other model. > M708 Model diagnostic files are attathched. > This case strange output > $xinput list > xinputlist.txt > UC-LOIC is strange. > > $ xinput list > ⎡ Virtual core pointer id=2 [master pointer (2)] > ⎜ ↳ UC-LOIC TABLET 1060 id=10 [slave pointer (2)] > ⎜ ↳ UC-LOIC TABLET 1060 id=11 [slave pointer (2)] > ⎜ ↳ UC-LOIC TABLET 1060 id=12 [slave pointer (2)] > > I have tried M708 model diagnostic. > > According to these way > http://digimend.github.io/support/howto/trbl/diagnostics/ > > > 1.Identify original model > $ lsusb > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. > Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 006 Device 003: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse > Bus 006 Device 002: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > > VID=5543 > PID=0081 > > $ T=5543:0081 > > 2.Retrieve USB descriptors > 1)sudo lsusb -v -d $T > descriptors.txt > Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x5543 UC-Logic Technology Corp. > idProduct 0x0081 > bcdDevice 0.00 > iManufacturer 5 UC-LOIC > iProduct 6 TABLET 1060 > iSerial 0 > bNumConfigurations 1 > ^C > > 2) sudo usbhid-dump -ed -m $T > hid_report_descriptors.txt > Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.10 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x5543 UC-Logic Technology Corp. > idProduct 0x0081 > bcdDevice 0.00 > iManufacturer 5 UC-LOIC > iProduct 6 TABLET 1060 > iSerial 0 > bNumConfigurations 1 > Configuration Descriptor: > ^C > > > 3.Collect raw input samples > sudo usbhid-dump -es -m $T | tee frame_wheel_srolling.txt > 007:002:000:STREAM 1418797530.559580 > 07 80 84 01 75 01 00 00 > > 007:002:000:STREAM 1418797530.565550 > 07 80 8B 01 6F 01 00 00 > > 007:002:000:STREAM 1418797530.573564 > 07 80 94 01 68 01 00 00 > > 007:002:000:STREAM 1418797530.579546 > 07 81 A0 01 5F 01 89 00 > ^C > > 4.PEN > $ sudo usbhid-dump -es -m $T | tee pen_coords.txt > > 4-1)Pen-Coordinate > 07 80 82 55 F7 5A 00 00 > > 007:002:000:STREAM 1418797673.689610 > 07 80 89 55 E0 5A 00 00 > > 007:002:000:STREAM 1418797673.695597 > 07 80 91 55 C7 5A 00 00 > > 007:002:000:STREAM 1418797673.699593 > 07 80 98 55 AD 5A 00 00 > > 007:002:000:STREAM 1418797673.705596 > 07 80 9E 55 93 5A 00 00 > ^C > > 4-2)Pen-Tiltangle > $ sudo usbhid-dump -es -m $T | tee pen_tilt.txt > Not Supported and skip > > > 4-3)Pen-Pressure > sudo usbhid-dump -es -m $T | tee pen_pressure.txt > > 007:002:000:STREAM 1418797836.355686 > 07 80 2A 56 48 2D 00 00 > > 007:002:000:STREAM 1418797836.477668 > 07 80 41 56 48 2D 00 00 > > 007:002:000:STREAM 1418797836.509667 > 07 80 58 56 48 2D 00 00 > > 007:002:000:STREAM 1418797836.535662 > 07 80 6B 56 48 2D 00 00 > ^C > > 4-4)Pen-Buttons > sudo usbhid-dump -es -m $T | tee pen_buttons.txt > > 007:002:000:STREAM 1418797957.023720 > 07 80 9D 3C 37 2B 00 00 > > 007:002:000:STREAM 1418797957.169706 > 07 80 BD 3C 37 2B 00 00 > > 007:002:000:STREAM 1418797957.547704 > 07 80 BD 3C 56 2B 00 00 > > 007:002:000:STREAM 1418797957.831697 > 07 80 DC 3C 56 2B 00 00 > > 007:002:000:STREAM 1418797957.855690 > 07 80 FC 3C 56 2B 00 00 > > 007:002:000:STREAM 1418797957.871695 > 07 80 16 3D 56 2B 00 00 > > 007:002:000:STREAM 1418797957.913699 > 07 80 2E 3D 56 2B 00 00 > > > 5 Frame Controls > 5-1)Frame Controls Dials > sudo usbhid-dump -es -m $T | tee frame_dials.txt > > Not Supported and skip > > 5-1)Frame Controls Buttons > $ sudo usbhid-dump -es -m $T | tee frame_buttons.txt > > > 007:002:002:STREAM 1418798804.272982 > 03 04 3D 00 00 00 00 00 > > 007:002:002:STREAM 1418798804.792976 > 03 00 00 00 00 00 00 00 > > 007:002:002:STREAM 1418798806.040974 > 03 01 16 00 00 00 00 00 > > 007:002:002:STREAM 1418798806.496976 > 03 00 00 00 00 00 00 00 > > 007:002:002:STREAM 1418798807.552979 > 03 02 56 00 00 00 00 00 > ^C > > > 6.Mouse > 6-1)Mouse-Coordinates > $ sudo usbhid-dump -es -m $T | tee mouse_coords.txt > Not Supported and skip > > 6-2)Mouse-Buttons > $ sudo usbhid-dump -es -m $T | tee mouse_buttons.txt > Not Supported and skip > > > 6-3)Mouse-Wheel > $ sudo usbhid-dump -es -m $T | tee mouse_wheel.txt > Not Supported and skip > > 7.huion-probe > 7-1)Identify original model > $ lsusb > identmodel.txt > Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. > bus=7 > device=2 > > 7-2)huion-probe > $ sudo huion-probe 7 2 > ~/huionprobe.txt > > M 55 00 43 00 2D 00 4C 00 4F 00 49 00 43 00 00 00 > P 54 00 41 00 42 00 4C 00 45 00 54 00 20 00 31 00 30 00 36 00 30 00 > S 64 0E 03 40 9C C0 5D 03 00 FF 07 A0 0F 08 00 > S 65 04 03 20 A0 > S 6E 04 03 30 00 > S 79 28 03 44 00 46 00 53 00 2D 00 55 00 49 00 20 00 46 00 34 00 30 00 31 00 2D 00 32 00 30 00 31 00 31 00 31 00 30 00 32 00 > S 7A 08 03 01 08 00 00 00 00 > > 7-2)huion-decode > $ sudo huion-probe 6 3 | huion-decode > ~/huiondecode.txt > Manufacturer: UC-LOIC? > Product: TABLET 1060 > Max X: 40000 > Max Y: 24000 > Max pressure: 2047 > Resolution: 4000 > Internal model: DFS-UI F401-2011102 > > > 7-2)Calculation > Active Area 10"x6" > MaxX / Width = MaxY / Height = Resolution > > *40000/Width =4000 > hence Width=10 > > *24000/Height=4000 > hence Height=6 > > Best regards, > Masaru Hirano > Neoblast Inc. > > > > > > > > > > > > > > > > > On 2014年12月15日 02:00, Nikolai Kondrashov wrote: >> Hi Masaru, >> >> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>> Hello Nick >>> >>> Thanks for your support. >>> We are Ugee distributer in japan. >>> Please let us know how to make driver. >>> >>> We would like to build ugee tablet driver. >>> VID=5543 >>> PID=0081 >>> These are all fine. >>> VID=5543 >>> PID=0045 >>> These are not work fine. >>> Calibration does not been succeed. >> >> I've made a very simple change to the digimend-kernel-drivers package, >> which >> has a slight possibility of making them work. I've simply added both of the >> product IDs you sent to the list of devices supported by the hid-huion >> driver, >> so it would treat them exactly as Huion tablets. >> >> The change is available in the "ugee" branch on GitHub, which you can >> download >> here: https://github.com/DIGImend/digimend-kernel-drivers/archive/ugee.zip >> >> Please try building, installing and using the driver with your tablets. We >> might just be lucky and they might work. >> >> Nick >> >> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>> Hello Nick >>> >>> Thanks for your support. >>> We are Ugee distributer in japan. >>> Please let us know how to make driver. >>> >>> We would like to build ugee tablet driver. >>> VID=5543 >>> PID=0081 >>> These are all fine. >>> VID=5543 >>> PID=0045 >>> These are not work fine. >>> Calibration does not been succeed. >>> >>> If you give me some procedure and tools for making tablet and tablet >>> monitor driver. >>> I would like to make. >>> Under ubuntu studio 14.04 >>> >>> File 1: >>> VID=5543 >>> PID=0081 >>> are work fine. >>> >>> File 2: >>> We would like to build for them. >>> >>> We are small company of system integrator for creative buginners. >>> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >>> cost effective in Japan. >>> >>> Ofcource when we made new driver, we will share for everyone. >>> >>> Best regards, >>> Masaru Hirano >>> Neoblast Inc. >>> >>> On 2014年11月05日 18:24, Nikolai Kondrashov wrote: >>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>> tablets >>>>> which you found working with our tablets >>>> >>>> I meant "our drivers", of course. >>>> >>>> Nick >>>> >>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>> Hello Masaru, >>>>> >>>>> I'm very glad to hear that another tablet distributor is choosing to >>>>> contribute their effort to making Linux drivers for their tablets. >>>>> >>>>> This year Yiynova helped with drivers for their tablets as well, and >>>>> now have >>>>> a bunch of models supported. >>>>> >>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>> tablets >>>>> which you found working with our tablets, along with their USB VID:PID >>>>> pairs, >>>>> so we can add them to the list and advertise their support. >>>>> >>>>> Regarding the so far unsupported tablets, I would also like to know >>>>> their >>>>> names and VID:PID pairs, along with their parameters (if those are >>>>> unavailable >>>>> on the web). I would also like to know which hardware they're based >>>>> on, if >>>>> possible. Is it UC-Logic, Waltop, anything else? >>>>> >>>>> This would get us started. >>>>> >>>>> Thank you. >>>>> >>>>> Sincerely, >>>>> Nick >>>>> >>>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote: >>>>>> Hello developper >>>>>> >>>>>> We are neoblast inc japan. >>>>>> We are one of Ugee Distributer. >>>>>> >>>>>> There are few driver for ugee. >>>>>> Most of product work by digemend kernel driver. >>>>>> But some product (tablet monitor, sketch=pad) do not work. >>>>>> http://ugee.net/index.asp >>>>>> >>>>>> We use ubuntu-studio 14.04. >>>>>> >>>>>> Digemend kernel driver are not enough for us. >>>>>> There are no friver for tablet monitor for ubuntu 14.04. >>>>>> >>>>>> We would like to build by ourseleves. >>>>>> Please let us know how to make kernel driver. >>>>>> >>>>>> best regards, >>>>>> Masaru Hirano >>>>>> neoblast inc. >>>> >>>> >>>> >> >> >> > |
|
From: Masaru H. <mh...@ne...> - 2015-01-08 01:26:48
|
Hello Thanks Nick I am sorry I am in bed with flu. My doughter is down with influenza. Please give me more a week. I will check. There's a lot of flu going around now. Sorry Masaru Hirano Neoblast Inc. On 2015年01月01日 01:19, Nikolai Kondrashov wrote: > Hi Masaru, > > On 12/30/2014 12:44 PM, Masaru Hirano wrote: >> Thanks for your new driver. >> Ugee-1000-L works fine. > > Good. How did you verify it exactly? > Could you please provide evtest dumps of the pen coords test? > Did you have any special X.org configuration, like using the WizardPen > driver? > >> According to change of this case. >> I could found 4 changes by sources. >> But I can not adopt for other model. >> Please teach me how to fit for other models. >> All the product uses UC-LOGIC > > I assumed that all your models have the UC-Logic vendor ID (0x5543) and > either > the 0x45 or 0x81 product ID. If that's so, the driver should attempt to > handle > all of them and no further code change should be necessary. > > Do you have tablets with other VID:PID pairs? > >> So I have tried same way. >> Ugee-M708 model >> But this model does not work correctry. >> Please teach me how to add other model. >> M708 Model diagnostic files are attathched. >> This case strange output >> $xinput list > xinputlist.txt >> UC-LOIC is strange. > > "UC-LOIC" is a typo on behalf of the manufacturer. It's what they've put > into > their device and string descriptors themselves. > >> $ xinput list >> ⎡ Virtual core pointer id=2 [master pointer >> (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=10 [slave >> pointer (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=11 [slave >> pointer (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=12 [slave >> pointer (2)] >> >> I have tried M708 model diagnostic. > > Were these diagnostic files collected with the driver installed? The tablet > should work fine as the coordinate range seems to be full and correct. > Do you, > by any chance, still use the WizardPen driver? Could you please provide > evtest > dumps of the pen coords test for this tablet as well? > > Nick > > On 12/30/2014 12:44 PM, Masaru Hirano wrote: >> Hello Nick >> >> Thanks for your new driver. >> Ugee-1000-L works fine. >> >> According to change of this case. >> I could found 4 changes by sources. >> But I can not adopt for other model. >> Please teach me how to fit for other models. >> All the product uses UC-LOGIC >> >> 1.hid-huion.c >> these two codes are added. >> >> line228: >> case USB_DEVICE_ID_UGEE_TABLET_81: >> line229: >> case USB_DEVICE_ID_UGEE_TABLET_45: >> >> 2.hid-hion.c >> these two codes are added. >> line275: >> { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_81) }, >> >> line276: >> { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_45) }, >> >> 3.hid-ids.h >> these two codes are added. >> line:22 >> #define USB_DEVICE_ID_UGEE_TABLET_81 0x0081 >> line:22 >> #define USB_DEVICE_ID_UGEE_TABLET_45 0x0045 >> >> So I have tried same way. >> Ugee-M708 model >> But this model does not work correctry. >> Please teach me how to add other model. >> M708 Model diagnostic files are attathched. >> This case strange output >> $xinput list > xinputlist.txt >> UC-LOIC is strange. >> >> $ xinput list >> ⎡ Virtual core pointer id=2 [master pointer >> (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=10 [slave >> pointer (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=11 [slave >> pointer (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=12 [slave >> pointer (2)] >> >> I have tried M708 model diagnostic. >> >> According to these way >> http://digimend.github.io/support/howto/trbl/diagnostics/ >> >> >> 1.Identify original model >> $ lsusb >> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 006 Device 003: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse >> Bus 006 Device 002: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 >> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> >> VID=5543 >> PID=0081 >> >> $ T=5543:0081 >> >> 2.Retrieve USB descriptors >> 1)sudo lsusb -v -d $T > descriptors.txt >> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 1.10 >> bDeviceClass 0 (Defined at Interface level) >> bDeviceSubClass 0 >> bDeviceProtocol 0 >> bMaxPacketSize0 64 >> idVendor 0x5543 UC-Logic Technology Corp. >> idProduct 0x0081 >> bcdDevice 0.00 >> iManufacturer 5 UC-LOIC >> iProduct 6 TABLET 1060 >> iSerial 0 >> bNumConfigurations 1 >> ^C >> >> 2) sudo usbhid-dump -ed -m $T > hid_report_descriptors.txt >> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 1.10 >> bDeviceClass 0 (Defined at Interface level) >> bDeviceSubClass 0 >> bDeviceProtocol 0 >> bMaxPacketSize0 64 >> idVendor 0x5543 UC-Logic Technology Corp. >> idProduct 0x0081 >> bcdDevice 0.00 >> iManufacturer 5 UC-LOIC >> iProduct 6 TABLET 1060 >> iSerial 0 >> bNumConfigurations 1 >> Configuration Descriptor: >> ^C >> >> >> 3.Collect raw input samples >> sudo usbhid-dump -es -m $T | tee frame_wheel_srolling.txt >> 007:002:000:STREAM 1418797530.559580 >> 07 80 84 01 75 01 00 00 >> >> 007:002:000:STREAM 1418797530.565550 >> 07 80 8B 01 6F 01 00 00 >> >> 007:002:000:STREAM 1418797530.573564 >> 07 80 94 01 68 01 00 00 >> >> 007:002:000:STREAM 1418797530.579546 >> 07 81 A0 01 5F 01 89 00 >> ^C >> >> 4.PEN >> $ sudo usbhid-dump -es -m $T | tee pen_coords.txt >> >> 4-1)Pen-Coordinate >> 07 80 82 55 F7 5A 00 00 >> >> 007:002:000:STREAM 1418797673.689610 >> 07 80 89 55 E0 5A 00 00 >> >> 007:002:000:STREAM 1418797673.695597 >> 07 80 91 55 C7 5A 00 00 >> >> 007:002:000:STREAM 1418797673.699593 >> 07 80 98 55 AD 5A 00 00 >> >> 007:002:000:STREAM 1418797673.705596 >> 07 80 9E 55 93 5A 00 00 >> ^C >> >> 4-2)Pen-Tiltangle >> $ sudo usbhid-dump -es -m $T | tee pen_tilt.txt >> Not Supported and skip >> >> >> 4-3)Pen-Pressure >> sudo usbhid-dump -es -m $T | tee pen_pressure.txt >> >> 007:002:000:STREAM 1418797836.355686 >> 07 80 2A 56 48 2D 00 00 >> >> 007:002:000:STREAM 1418797836.477668 >> 07 80 41 56 48 2D 00 00 >> >> 007:002:000:STREAM 1418797836.509667 >> 07 80 58 56 48 2D 00 00 >> >> 007:002:000:STREAM 1418797836.535662 >> 07 80 6B 56 48 2D 00 00 >> ^C >> >> 4-4)Pen-Buttons >> sudo usbhid-dump -es -m $T | tee pen_buttons.txt >> >> 007:002:000:STREAM 1418797957.023720 >> 07 80 9D 3C 37 2B 00 00 >> >> 007:002:000:STREAM 1418797957.169706 >> 07 80 BD 3C 37 2B 00 00 >> >> 007:002:000:STREAM 1418797957.547704 >> 07 80 BD 3C 56 2B 00 00 >> >> 007:002:000:STREAM 1418797957.831697 >> 07 80 DC 3C 56 2B 00 00 >> >> 007:002:000:STREAM 1418797957.855690 >> 07 80 FC 3C 56 2B 00 00 >> >> 007:002:000:STREAM 1418797957.871695 >> 07 80 16 3D 56 2B 00 00 >> >> 007:002:000:STREAM 1418797957.913699 >> 07 80 2E 3D 56 2B 00 00 >> >> >> 5 Frame Controls >> 5-1)Frame Controls Dials >> sudo usbhid-dump -es -m $T | tee frame_dials.txt >> >> Not Supported and skip >> >> 5-1)Frame Controls Buttons >> $ sudo usbhid-dump -es -m $T | tee frame_buttons.txt >> >> >> 007:002:002:STREAM 1418798804.272982 >> 03 04 3D 00 00 00 00 00 >> >> 007:002:002:STREAM 1418798804.792976 >> 03 00 00 00 00 00 00 00 >> >> 007:002:002:STREAM 1418798806.040974 >> 03 01 16 00 00 00 00 00 >> >> 007:002:002:STREAM 1418798806.496976 >> 03 00 00 00 00 00 00 00 >> >> 007:002:002:STREAM 1418798807.552979 >> 03 02 56 00 00 00 00 00 >> ^C >> >> >> 6.Mouse >> 6-1)Mouse-Coordinates >> $ sudo usbhid-dump -es -m $T | tee mouse_coords.txt >> Not Supported and skip >> >> 6-2)Mouse-Buttons >> $ sudo usbhid-dump -es -m $T | tee mouse_buttons.txt >> Not Supported and skip >> >> >> 6-3)Mouse-Wheel >> $ sudo usbhid-dump -es -m $T | tee mouse_wheel.txt >> Not Supported and skip >> >> 7.huion-probe >> 7-1)Identify original model >> $ lsusb > identmodel.txt >> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >> bus=7 >> device=2 >> >> 7-2)huion-probe >> $ sudo huion-probe 7 2 > ~/huionprobe.txt >> >> M 55 00 43 00 2D 00 4C 00 4F 00 49 00 43 00 00 00 >> P 54 00 41 00 42 00 4C 00 45 00 54 00 20 00 31 00 30 00 36 00 30 00 >> S 64 0E 03 40 9C C0 5D 03 00 FF 07 A0 0F 08 00 >> S 65 04 03 20 A0 >> S 6E 04 03 30 00 >> S 79 28 03 44 00 46 00 53 00 2D 00 55 00 49 00 20 00 46 00 34 00 30 00 >> 31 00 2D 00 32 00 30 00 31 00 31 00 31 00 30 00 32 00 >> S 7A 08 03 01 08 00 00 00 00 >> >> 7-2)huion-decode >> $ sudo huion-probe 6 3 | huion-decode > ~/huiondecode.txt >> Manufacturer: UC-LOIC? >> Product: TABLET 1060 >> Max X: 40000 >> Max Y: 24000 >> Max pressure: 2047 >> Resolution: 4000 >> Internal model: DFS-UI F401-2011102 >> >> >> 7-2)Calculation >> Active Area 10"x6" >> MaxX / Width = MaxY / Height = Resolution >> >> *40000/Width =4000 >> hence Width=10 >> >> *24000/Height=4000 >> hence Height=6 >> >> Best regards, >> Masaru Hirano >> Neoblast Inc. >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> On 2014年12月15日 02:00, Nikolai Kondrashov wrote: >>> Hi Masaru, >>> >>> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>>> Hello Nick >>>> >>>> Thanks for your support. >>>> We are Ugee distributer in japan. >>>> Please let us know how to make driver. >>>> >>>> We would like to build ugee tablet driver. >>>> VID=5543 >>>> PID=0081 >>>> These are all fine. >>>> VID=5543 >>>> PID=0045 >>>> These are not work fine. >>>> Calibration does not been succeed. >>> >>> I've made a very simple change to the digimend-kernel-drivers package, >>> which >>> has a slight possibility of making them work. I've simply added both >>> of the >>> product IDs you sent to the list of devices supported by the hid-huion >>> driver, >>> so it would treat them exactly as Huion tablets. >>> >>> The change is available in the "ugee" branch on GitHub, which you can >>> download >>> here: >>> https://github.com/DIGImend/digimend-kernel-drivers/archive/ugee.zip >>> >>> Please try building, installing and using the driver with your >>> tablets. We >>> might just be lucky and they might work. >>> >>> Nick >>> >>> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>>> Hello Nick >>>> >>>> Thanks for your support. >>>> We are Ugee distributer in japan. >>>> Please let us know how to make driver. >>>> >>>> We would like to build ugee tablet driver. >>>> VID=5543 >>>> PID=0081 >>>> These are all fine. >>>> VID=5543 >>>> PID=0045 >>>> These are not work fine. >>>> Calibration does not been succeed. >>>> >>>> If you give me some procedure and tools for making tablet and tablet >>>> monitor driver. >>>> I would like to make. >>>> Under ubuntu studio 14.04 >>>> >>>> File 1: >>>> VID=5543 >>>> PID=0081 >>>> are work fine. >>>> >>>> File 2: >>>> We would like to build for them. >>>> >>>> We are small company of system integrator for creative buginners. >>>> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >>>> cost effective in Japan. >>>> >>>> Ofcource when we made new driver, we will share for everyone. >>>> >>>> Best regards, >>>> Masaru Hirano >>>> Neoblast Inc. >>>> >>>> On 2014年11月05日 18:24, Nikolai Kondrashov wrote: >>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>>> tablets >>>>>> which you found working with our tablets >>>>> >>>>> I meant "our drivers", of course. >>>>> >>>>> Nick >>>>> >>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>>> Hello Masaru, >>>>>> >>>>>> I'm very glad to hear that another tablet distributor is choosing to >>>>>> contribute their effort to making Linux drivers for their tablets. >>>>>> >>>>>> This year Yiynova helped with drivers for their tablets as well, and >>>>>> now have >>>>>> a bunch of models supported. >>>>>> >>>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>>> tablets >>>>>> which you found working with our tablets, along with their USB >>>>>> VID:PID >>>>>> pairs, >>>>>> so we can add them to the list and advertise their support. >>>>>> >>>>>> Regarding the so far unsupported tablets, I would also like to know >>>>>> their >>>>>> names and VID:PID pairs, along with their parameters (if those are >>>>>> unavailable >>>>>> on the web). I would also like to know which hardware they're based >>>>>> on, if >>>>>> possible. Is it UC-Logic, Waltop, anything else? >>>>>> >>>>>> This would get us started. >>>>>> >>>>>> Thank you. >>>>>> >>>>>> Sincerely, >>>>>> Nick >>>>>> >>>>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote: >>>>>>> Hello developper >>>>>>> >>>>>>> We are neoblast inc japan. >>>>>>> We are one of Ugee Distributer. >>>>>>> >>>>>>> There are few driver for ugee. >>>>>>> Most of product work by digemend kernel driver. >>>>>>> But some product (tablet monitor, sketch=pad) do not work. >>>>>>> http://ugee.net/index.asp >>>>>>> >>>>>>> We use ubuntu-studio 14.04. >>>>>>> >>>>>>> Digemend kernel driver are not enough for us. >>>>>>> There are no friver for tablet monitor for ubuntu 14.04. >>>>>>> >>>>>>> We would like to build by ourseleves. >>>>>>> Please let us know how to make kernel driver. >>>>>>> >>>>>>> best regards, >>>>>>> Masaru Hirano >>>>>>> neoblast inc. >>>>> >>>>> >>>>> >>> >>> >>> >> > > > -- ========================================= Masaru Hirano Neoblast Inc. Tokiwadai1-67-5-704, Itabashi-ku, Tokyo, Japan ZIP:174-0071 E-Mail:mh...@ne... Tel:+81-3-4570-7345 Mob:+81-70-6575-1732 Fax:+81-20-4623-9249 ========================================= |
|
From: Nikolai K. <sp...@gm...> - 2015-01-08 10:57:28
|
Hi Masaru, On 01/08/2015 03:26 AM, Masaru Hirano wrote: > Hello Thanks Nick > > I am sorry I am in bed with flu. > My doughter is down with influenza. > > Please give me more a week. > I will check. > > There's a lot of flu going around now. Sure, we had this in autumn here in Finland. No problem, I have a lot of other stuff to do myself as well :) Nick On 01/08/2015 03:26 AM, Masaru Hirano wrote: > Hello Thanks Nick > > I am sorry I am in bed with flu. > My doughter is down with influenza. > > Please give me more a week. > I will check. > > There's a lot of flu going around now. > > Sorry > Masaru Hirano > Neoblast Inc. > > On 2015年01月01日 01:19, Nikolai Kondrashov wrote: >> Hi Masaru, >> >> On 12/30/2014 12:44 PM, Masaru Hirano wrote: >>> Thanks for your new driver. >>> Ugee-1000-L works fine. >> >> Good. How did you verify it exactly? >> Could you please provide evtest dumps of the pen coords test? >> Did you have any special X.org configuration, like using the WizardPen >> driver? >> >>> According to change of this case. >>> I could found 4 changes by sources. >>> But I can not adopt for other model. >>> Please teach me how to fit for other models. >>> All the product uses UC-LOGIC >> >> I assumed that all your models have the UC-Logic vendor ID (0x5543) and >> either >> the 0x45 or 0x81 product ID. If that's so, the driver should attempt to >> handle >> all of them and no further code change should be necessary. >> >> Do you have tablets with other VID:PID pairs? >> >>> So I have tried same way. >>> Ugee-M708 model >>> But this model does not work correctry. >>> Please teach me how to add other model. >>> M708 Model diagnostic files are attathched. >>> This case strange output >>> $xinput list > xinputlist.txt >>> UC-LOIC is strange. >> >> "UC-LOIC" is a typo on behalf of the manufacturer. It's what they've put >> into >> their device and string descriptors themselves. >> >>> $ xinput list >>> ⎡ Virtual core pointer id=2 [master pointer >>> (2)] >>> ⎜ ↳ UC-LOIC TABLET 1060 id=10 [slave >>> pointer (2)] >>> ⎜ ↳ UC-LOIC TABLET 1060 id=11 [slave >>> pointer (2)] >>> ⎜ ↳ UC-LOIC TABLET 1060 id=12 [slave >>> pointer (2)] >>> >>> I have tried M708 model diagnostic. >> >> Were these diagnostic files collected with the driver installed? The tablet >> should work fine as the coordinate range seems to be full and correct. >> Do you, >> by any chance, still use the WizardPen driver? Could you please provide >> evtest >> dumps of the pen coords test for this tablet as well? >> >> Nick >> >> On 12/30/2014 12:44 PM, Masaru Hirano wrote: >>> Hello Nick >>> >>> Thanks for your new driver. >>> Ugee-1000-L works fine. >>> >>> According to change of this case. >>> I could found 4 changes by sources. >>> But I can not adopt for other model. >>> Please teach me how to fit for other models. >>> All the product uses UC-LOGIC >>> >>> 1.hid-huion.c >>> these two codes are added. >>> >>> line228: >>> case USB_DEVICE_ID_UGEE_TABLET_81: >>> line229: >>> case USB_DEVICE_ID_UGEE_TABLET_45: >>> >>> 2.hid-hion.c >>> these two codes are added. >>> line275: >>> { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_81) }, >>> >>> line276: >>> { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_45) }, >>> >>> 3.hid-ids.h >>> these two codes are added. >>> line:22 >>> #define USB_DEVICE_ID_UGEE_TABLET_81 0x0081 >>> line:22 >>> #define USB_DEVICE_ID_UGEE_TABLET_45 0x0045 >>> >>> So I have tried same way. >>> Ugee-M708 model >>> But this model does not work correctry. >>> Please teach me how to add other model. >>> M708 Model diagnostic files are attathched. >>> This case strange output >>> $xinput list > xinputlist.txt >>> UC-LOIC is strange. >>> >>> $ xinput list >>> ⎡ Virtual core pointer id=2 [master pointer >>> (2)] >>> ⎜ ↳ UC-LOIC TABLET 1060 id=10 [slave >>> pointer (2)] >>> ⎜ ↳ UC-LOIC TABLET 1060 id=11 [slave >>> pointer (2)] >>> ⎜ ↳ UC-LOIC TABLET 1060 id=12 [slave >>> pointer (2)] >>> >>> I have tried M708 model diagnostic. >>> >>> According to these way >>> http://digimend.github.io/support/howto/trbl/diagnostics/ >>> >>> >>> 1.Identify original model >>> $ lsusb >>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 006 Device 003: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse >>> Bus 006 Device 002: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 >>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >>> >>> VID=5543 >>> PID=0081 >>> >>> $ T=5543:0081 >>> >>> 2.Retrieve USB descriptors >>> 1)sudo lsusb -v -d $T > descriptors.txt >>> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >>> Device Descriptor: >>> bLength 18 >>> bDescriptorType 1 >>> bcdUSB 1.10 >>> bDeviceClass 0 (Defined at Interface level) >>> bDeviceSubClass 0 >>> bDeviceProtocol 0 >>> bMaxPacketSize0 64 >>> idVendor 0x5543 UC-Logic Technology Corp. >>> idProduct 0x0081 >>> bcdDevice 0.00 >>> iManufacturer 5 UC-LOIC >>> iProduct 6 TABLET 1060 >>> iSerial 0 >>> bNumConfigurations 1 >>> ^C >>> >>> 2) sudo usbhid-dump -ed -m $T > hid_report_descriptors.txt >>> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >>> Device Descriptor: >>> bLength 18 >>> bDescriptorType 1 >>> bcdUSB 1.10 >>> bDeviceClass 0 (Defined at Interface level) >>> bDeviceSubClass 0 >>> bDeviceProtocol 0 >>> bMaxPacketSize0 64 >>> idVendor 0x5543 UC-Logic Technology Corp. >>> idProduct 0x0081 >>> bcdDevice 0.00 >>> iManufacturer 5 UC-LOIC >>> iProduct 6 TABLET 1060 >>> iSerial 0 >>> bNumConfigurations 1 >>> Configuration Descriptor: >>> ^C >>> >>> >>> 3.Collect raw input samples >>> sudo usbhid-dump -es -m $T | tee frame_wheel_srolling.txt >>> 007:002:000:STREAM 1418797530.559580 >>> 07 80 84 01 75 01 00 00 >>> >>> 007:002:000:STREAM 1418797530.565550 >>> 07 80 8B 01 6F 01 00 00 >>> >>> 007:002:000:STREAM 1418797530.573564 >>> 07 80 94 01 68 01 00 00 >>> >>> 007:002:000:STREAM 1418797530.579546 >>> 07 81 A0 01 5F 01 89 00 >>> ^C >>> >>> 4.PEN >>> $ sudo usbhid-dump -es -m $T | tee pen_coords.txt >>> >>> 4-1)Pen-Coordinate >>> 07 80 82 55 F7 5A 00 00 >>> >>> 007:002:000:STREAM 1418797673.689610 >>> 07 80 89 55 E0 5A 00 00 >>> >>> 007:002:000:STREAM 1418797673.695597 >>> 07 80 91 55 C7 5A 00 00 >>> >>> 007:002:000:STREAM 1418797673.699593 >>> 07 80 98 55 AD 5A 00 00 >>> >>> 007:002:000:STREAM 1418797673.705596 >>> 07 80 9E 55 93 5A 00 00 >>> ^C >>> >>> 4-2)Pen-Tiltangle >>> $ sudo usbhid-dump -es -m $T | tee pen_tilt.txt >>> Not Supported and skip >>> >>> >>> 4-3)Pen-Pressure >>> sudo usbhid-dump -es -m $T | tee pen_pressure.txt >>> >>> 007:002:000:STREAM 1418797836.355686 >>> 07 80 2A 56 48 2D 00 00 >>> >>> 007:002:000:STREAM 1418797836.477668 >>> 07 80 41 56 48 2D 00 00 >>> >>> 007:002:000:STREAM 1418797836.509667 >>> 07 80 58 56 48 2D 00 00 >>> >>> 007:002:000:STREAM 1418797836.535662 >>> 07 80 6B 56 48 2D 00 00 >>> ^C >>> >>> 4-4)Pen-Buttons >>> sudo usbhid-dump -es -m $T | tee pen_buttons.txt >>> >>> 007:002:000:STREAM 1418797957.023720 >>> 07 80 9D 3C 37 2B 00 00 >>> >>> 007:002:000:STREAM 1418797957.169706 >>> 07 80 BD 3C 37 2B 00 00 >>> >>> 007:002:000:STREAM 1418797957.547704 >>> 07 80 BD 3C 56 2B 00 00 >>> >>> 007:002:000:STREAM 1418797957.831697 >>> 07 80 DC 3C 56 2B 00 00 >>> >>> 007:002:000:STREAM 1418797957.855690 >>> 07 80 FC 3C 56 2B 00 00 >>> >>> 007:002:000:STREAM 1418797957.871695 >>> 07 80 16 3D 56 2B 00 00 >>> >>> 007:002:000:STREAM 1418797957.913699 >>> 07 80 2E 3D 56 2B 00 00 >>> >>> >>> 5 Frame Controls >>> 5-1)Frame Controls Dials >>> sudo usbhid-dump -es -m $T | tee frame_dials.txt >>> >>> Not Supported and skip >>> >>> 5-1)Frame Controls Buttons >>> $ sudo usbhid-dump -es -m $T | tee frame_buttons.txt >>> >>> >>> 007:002:002:STREAM 1418798804.272982 >>> 03 04 3D 00 00 00 00 00 >>> >>> 007:002:002:STREAM 1418798804.792976 >>> 03 00 00 00 00 00 00 00 >>> >>> 007:002:002:STREAM 1418798806.040974 >>> 03 01 16 00 00 00 00 00 >>> >>> 007:002:002:STREAM 1418798806.496976 >>> 03 00 00 00 00 00 00 00 >>> >>> 007:002:002:STREAM 1418798807.552979 >>> 03 02 56 00 00 00 00 00 >>> ^C >>> >>> >>> 6.Mouse >>> 6-1)Mouse-Coordinates >>> $ sudo usbhid-dump -es -m $T | tee mouse_coords.txt >>> Not Supported and skip >>> >>> 6-2)Mouse-Buttons >>> $ sudo usbhid-dump -es -m $T | tee mouse_buttons.txt >>> Not Supported and skip >>> >>> >>> 6-3)Mouse-Wheel >>> $ sudo usbhid-dump -es -m $T | tee mouse_wheel.txt >>> Not Supported and skip >>> >>> 7.huion-probe >>> 7-1)Identify original model >>> $ lsusb > identmodel.txt >>> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >>> bus=7 >>> device=2 >>> >>> 7-2)huion-probe >>> $ sudo huion-probe 7 2 > ~/huionprobe.txt >>> >>> M 55 00 43 00 2D 00 4C 00 4F 00 49 00 43 00 00 00 >>> P 54 00 41 00 42 00 4C 00 45 00 54 00 20 00 31 00 30 00 36 00 30 00 >>> S 64 0E 03 40 9C C0 5D 03 00 FF 07 A0 0F 08 00 >>> S 65 04 03 20 A0 >>> S 6E 04 03 30 00 >>> S 79 28 03 44 00 46 00 53 00 2D 00 55 00 49 00 20 00 46 00 34 00 30 00 >>> 31 00 2D 00 32 00 30 00 31 00 31 00 31 00 30 00 32 00 >>> S 7A 08 03 01 08 00 00 00 00 >>> >>> 7-2)huion-decode >>> $ sudo huion-probe 6 3 | huion-decode > ~/huiondecode.txt >>> Manufacturer: UC-LOIC? >>> Product: TABLET 1060 >>> Max X: 40000 >>> Max Y: 24000 >>> Max pressure: 2047 >>> Resolution: 4000 >>> Internal model: DFS-UI F401-2011102 >>> >>> >>> 7-2)Calculation >>> Active Area 10"x6" >>> MaxX / Width = MaxY / Height = Resolution >>> >>> *40000/Width =4000 >>> hence Width=10 >>> >>> *24000/Height=4000 >>> hence Height=6 >>> >>> Best regards, >>> Masaru Hirano >>> Neoblast Inc. >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> On 2014年12月15日 02:00, Nikolai Kondrashov wrote: >>>> Hi Masaru, >>>> >>>> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>>>> Hello Nick >>>>> >>>>> Thanks for your support. >>>>> We are Ugee distributer in japan. >>>>> Please let us know how to make driver. >>>>> >>>>> We would like to build ugee tablet driver. >>>>> VID=5543 >>>>> PID=0081 >>>>> These are all fine. >>>>> VID=5543 >>>>> PID=0045 >>>>> These are not work fine. >>>>> Calibration does not been succeed. >>>> >>>> I've made a very simple change to the digimend-kernel-drivers package, >>>> which >>>> has a slight possibility of making them work. I've simply added both >>>> of the >>>> product IDs you sent to the list of devices supported by the hid-huion >>>> driver, >>>> so it would treat them exactly as Huion tablets. >>>> >>>> The change is available in the "ugee" branch on GitHub, which you can >>>> download >>>> here: >>>> https://github.com/DIGImend/digimend-kernel-drivers/archive/ugee.zip >>>> >>>> Please try building, installing and using the driver with your >>>> tablets. We >>>> might just be lucky and they might work. >>>> >>>> Nick >>>> >>>> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>>>> Hello Nick >>>>> >>>>> Thanks for your support. >>>>> We are Ugee distributer in japan. >>>>> Please let us know how to make driver. >>>>> >>>>> We would like to build ugee tablet driver. >>>>> VID=5543 >>>>> PID=0081 >>>>> These are all fine. >>>>> VID=5543 >>>>> PID=0045 >>>>> These are not work fine. >>>>> Calibration does not been succeed. >>>>> >>>>> If you give me some procedure and tools for making tablet and tablet >>>>> monitor driver. >>>>> I would like to make. >>>>> Under ubuntu studio 14.04 >>>>> >>>>> File 1: >>>>> VID=5543 >>>>> PID=0081 >>>>> are work fine. >>>>> >>>>> File 2: >>>>> We would like to build for them. >>>>> >>>>> We are small company of system integrator for creative buginners. >>>>> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >>>>> cost effective in Japan. >>>>> >>>>> Ofcource when we made new driver, we will share for everyone. >>>>> >>>>> Best regards, >>>>> Masaru Hirano >>>>> Neoblast Inc. >>>>> >>>>> On 2014年11月05日 18:24, Nikolai Kondrashov wrote: >>>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>>>> tablets >>>>>>> which you found working with our tablets >>>>>> >>>>>> I meant "our drivers", of course. >>>>>> >>>>>> Nick >>>>>> >>>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>>>> Hello Masaru, >>>>>>> >>>>>>> I'm very glad to hear that another tablet distributor is choosing to >>>>>>> contribute their effort to making Linux drivers for their tablets. >>>>>>> >>>>>>> This year Yiynova helped with drivers for their tablets as well, and >>>>>>> now have >>>>>>> a bunch of models supported. >>>>>>> >>>>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>>>> tablets >>>>>>> which you found working with our tablets, along with their USB >>>>>>> VID:PID >>>>>>> pairs, >>>>>>> so we can add them to the list and advertise their support. >>>>>>> >>>>>>> Regarding the so far unsupported tablets, I would also like to know >>>>>>> their >>>>>>> names and VID:PID pairs, along with their parameters (if those are >>>>>>> unavailable >>>>>>> on the web). I would also like to know which hardware they're based >>>>>>> on, if >>>>>>> possible. Is it UC-Logic, Waltop, anything else? >>>>>>> >>>>>>> This would get us started. >>>>>>> >>>>>>> Thank you. >>>>>>> >>>>>>> Sincerely, >>>>>>> Nick >>>>>>> >>>>>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote: >>>>>>>> Hello developper >>>>>>>> >>>>>>>> We are neoblast inc japan. >>>>>>>> We are one of Ugee Distributer. >>>>>>>> >>>>>>>> There are few driver for ugee. >>>>>>>> Most of product work by digemend kernel driver. >>>>>>>> But some product (tablet monitor, sketch=pad) do not work. >>>>>>>> http://ugee.net/index.asp >>>>>>>> >>>>>>>> We use ubuntu-studio 14.04. >>>>>>>> >>>>>>>> Digemend kernel driver are not enough for us. >>>>>>>> There are no friver for tablet monitor for ubuntu 14.04. >>>>>>>> >>>>>>>> We would like to build by ourseleves. >>>>>>>> Please let us know how to make kernel driver. >>>>>>>> >>>>>>>> best regards, >>>>>>>> Masaru Hirano >>>>>>>> neoblast inc. >>>>>> >>>>>> >>>>>> >>>> >>>> >>>> >>> >> >> >> > |
|
From: Nikolai K. <sp...@gm...> - 2015-01-08 11:03:30
|
On 01/08/2015 03:26 AM, Masaru Hirano wrote: > Hello Thanks Nick > > I am sorry I am in bed with flu. > My doughter is down with influenza. > > Please give me more a week. > I will check. > > There's a lot of flu going around now. And both of you get well soon! Nick |
|
From: Masaru H. <mh...@ne...> - 2015-01-22 11:40:52
Attachments:
22Jan15UgeeMaintenance.pdf
|
Hello Nick Thanks for waiting for my reply. Tests are over. I have atatced the result. M1000L,M708,M860 are work fine. Thanks. Other products will be collected the data. If you have information how to modify source code, please let me know. best regards, Masaru Hirano Neoblast Inc. On 2015年01月01日 01:19, Nikolai Kondrashov wrote: > Hi Masaru, > > On 12/30/2014 12:44 PM, Masaru Hirano wrote: >> Thanks for your new driver. >> Ugee-1000-L works fine. > > Good. How did you verify it exactly? > Could you please provide evtest dumps of the pen coords test? > Did you have any special X.org configuration, like using the WizardPen > driver? > >> According to change of this case. >> I could found 4 changes by sources. >> But I can not adopt for other model. >> Please teach me how to fit for other models. >> All the product uses UC-LOGIC > > I assumed that all your models have the UC-Logic vendor ID (0x5543) and > either > the 0x45 or 0x81 product ID. If that's so, the driver should attempt to > handle > all of them and no further code change should be necessary. > > Do you have tablets with other VID:PID pairs? > >> So I have tried same way. >> Ugee-M708 model >> But this model does not work correctry. >> Please teach me how to add other model. >> M708 Model diagnostic files are attathched. >> This case strange output >> $xinput list > xinputlist.txt >> UC-LOIC is strange. > > "UC-LOIC" is a typo on behalf of the manufacturer. It's what they've put > into > their device and string descriptors themselves. > >> $ xinput list >> ⎡ Virtual core pointer id=2 [master pointer >> (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=10 [slave >> pointer (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=11 [slave >> pointer (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=12 [slave >> pointer (2)] >> >> I have tried M708 model diagnostic. > > Were these diagnostic files collected with the driver installed? The tablet > should work fine as the coordinate range seems to be full and correct. > Do you, > by any chance, still use the WizardPen driver? Could you please provide > evtest > dumps of the pen coords test for this tablet as well? > > Nick > > On 12/30/2014 12:44 PM, Masaru Hirano wrote: >> Hello Nick >> >> Thanks for your new driver. >> Ugee-1000-L works fine. >> >> According to change of this case. >> I could found 4 changes by sources. >> But I can not adopt for other model. >> Please teach me how to fit for other models. >> All the product uses UC-LOGIC >> >> 1.hid-huion.c >> these two codes are added. >> >> line228: >> case USB_DEVICE_ID_UGEE_TABLET_81: >> line229: >> case USB_DEVICE_ID_UGEE_TABLET_45: >> >> 2.hid-hion.c >> these two codes are added. >> line275: >> { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_81) }, >> >> line276: >> { HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UGEE_TABLET_45) }, >> >> 3.hid-ids.h >> these two codes are added. >> line:22 >> #define USB_DEVICE_ID_UGEE_TABLET_81 0x0081 >> line:22 >> #define USB_DEVICE_ID_UGEE_TABLET_45 0x0045 >> >> So I have tried same way. >> Ugee-M708 model >> But this model does not work correctry. >> Please teach me how to add other model. >> M708 Model diagnostic files are attathched. >> This case strange output >> $xinput list > xinputlist.txt >> UC-LOIC is strange. >> >> $ xinput list >> ⎡ Virtual core pointer id=2 [master pointer >> (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=10 [slave >> pointer (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=11 [slave >> pointer (2)] >> ⎜ ↳ UC-LOIC TABLET 1060 id=12 [slave >> pointer (2)] >> >> I have tried M708 model diagnostic. >> >> According to these way >> http://digimend.github.io/support/howto/trbl/diagnostics/ >> >> >> 1.Identify original model >> $ lsusb >> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 006 Device 003: ID 046d:c016 Logitech, Inc. Optical Wheel Mouse >> Bus 006 Device 002: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 >> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub >> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub >> >> VID=5543 >> PID=0081 >> >> $ T=5543:0081 >> >> 2.Retrieve USB descriptors >> 1)sudo lsusb -v -d $T > descriptors.txt >> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 1.10 >> bDeviceClass 0 (Defined at Interface level) >> bDeviceSubClass 0 >> bDeviceProtocol 0 >> bMaxPacketSize0 64 >> idVendor 0x5543 UC-Logic Technology Corp. >> idProduct 0x0081 >> bcdDevice 0.00 >> iManufacturer 5 UC-LOIC >> iProduct 6 TABLET 1060 >> iSerial 0 >> bNumConfigurations 1 >> ^C >> >> 2) sudo usbhid-dump -ed -m $T > hid_report_descriptors.txt >> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >> Device Descriptor: >> bLength 18 >> bDescriptorType 1 >> bcdUSB 1.10 >> bDeviceClass 0 (Defined at Interface level) >> bDeviceSubClass 0 >> bDeviceProtocol 0 >> bMaxPacketSize0 64 >> idVendor 0x5543 UC-Logic Technology Corp. >> idProduct 0x0081 >> bcdDevice 0.00 >> iManufacturer 5 UC-LOIC >> iProduct 6 TABLET 1060 >> iSerial 0 >> bNumConfigurations 1 >> Configuration Descriptor: >> ^C >> >> >> 3.Collect raw input samples >> sudo usbhid-dump -es -m $T | tee frame_wheel_srolling.txt >> 007:002:000:STREAM 1418797530.559580 >> 07 80 84 01 75 01 00 00 >> >> 007:002:000:STREAM 1418797530.565550 >> 07 80 8B 01 6F 01 00 00 >> >> 007:002:000:STREAM 1418797530.573564 >> 07 80 94 01 68 01 00 00 >> >> 007:002:000:STREAM 1418797530.579546 >> 07 81 A0 01 5F 01 89 00 >> ^C >> >> 4.PEN >> $ sudo usbhid-dump -es -m $T | tee pen_coords.txt >> >> 4-1)Pen-Coordinate >> 07 80 82 55 F7 5A 00 00 >> >> 007:002:000:STREAM 1418797673.689610 >> 07 80 89 55 E0 5A 00 00 >> >> 007:002:000:STREAM 1418797673.695597 >> 07 80 91 55 C7 5A 00 00 >> >> 007:002:000:STREAM 1418797673.699593 >> 07 80 98 55 AD 5A 00 00 >> >> 007:002:000:STREAM 1418797673.705596 >> 07 80 9E 55 93 5A 00 00 >> ^C >> >> 4-2)Pen-Tiltangle >> $ sudo usbhid-dump -es -m $T | tee pen_tilt.txt >> Not Supported and skip >> >> >> 4-3)Pen-Pressure >> sudo usbhid-dump -es -m $T | tee pen_pressure.txt >> >> 007:002:000:STREAM 1418797836.355686 >> 07 80 2A 56 48 2D 00 00 >> >> 007:002:000:STREAM 1418797836.477668 >> 07 80 41 56 48 2D 00 00 >> >> 007:002:000:STREAM 1418797836.509667 >> 07 80 58 56 48 2D 00 00 >> >> 007:002:000:STREAM 1418797836.535662 >> 07 80 6B 56 48 2D 00 00 >> ^C >> >> 4-4)Pen-Buttons >> sudo usbhid-dump -es -m $T | tee pen_buttons.txt >> >> 007:002:000:STREAM 1418797957.023720 >> 07 80 9D 3C 37 2B 00 00 >> >> 007:002:000:STREAM 1418797957.169706 >> 07 80 BD 3C 37 2B 00 00 >> >> 007:002:000:STREAM 1418797957.547704 >> 07 80 BD 3C 56 2B 00 00 >> >> 007:002:000:STREAM 1418797957.831697 >> 07 80 DC 3C 56 2B 00 00 >> >> 007:002:000:STREAM 1418797957.855690 >> 07 80 FC 3C 56 2B 00 00 >> >> 007:002:000:STREAM 1418797957.871695 >> 07 80 16 3D 56 2B 00 00 >> >> 007:002:000:STREAM 1418797957.913699 >> 07 80 2E 3D 56 2B 00 00 >> >> >> 5 Frame Controls >> 5-1)Frame Controls Dials >> sudo usbhid-dump -es -m $T | tee frame_dials.txt >> >> Not Supported and skip >> >> 5-1)Frame Controls Buttons >> $ sudo usbhid-dump -es -m $T | tee frame_buttons.txt >> >> >> 007:002:002:STREAM 1418798804.272982 >> 03 04 3D 00 00 00 00 00 >> >> 007:002:002:STREAM 1418798804.792976 >> 03 00 00 00 00 00 00 00 >> >> 007:002:002:STREAM 1418798806.040974 >> 03 01 16 00 00 00 00 00 >> >> 007:002:002:STREAM 1418798806.496976 >> 03 00 00 00 00 00 00 00 >> >> 007:002:002:STREAM 1418798807.552979 >> 03 02 56 00 00 00 00 00 >> ^C >> >> >> 6.Mouse >> 6-1)Mouse-Coordinates >> $ sudo usbhid-dump -es -m $T | tee mouse_coords.txt >> Not Supported and skip >> >> 6-2)Mouse-Buttons >> $ sudo usbhid-dump -es -m $T | tee mouse_buttons.txt >> Not Supported and skip >> >> >> 6-3)Mouse-Wheel >> $ sudo usbhid-dump -es -m $T | tee mouse_wheel.txt >> Not Supported and skip >> >> 7.huion-probe >> 7-1)Identify original model >> $ lsusb > identmodel.txt >> Bus 007 Device 002: ID 5543:0081 UC-Logic Technology Corp. >> bus=7 >> device=2 >> >> 7-2)huion-probe >> $ sudo huion-probe 7 2 > ~/huionprobe.txt >> >> M 55 00 43 00 2D 00 4C 00 4F 00 49 00 43 00 00 00 >> P 54 00 41 00 42 00 4C 00 45 00 54 00 20 00 31 00 30 00 36 00 30 00 >> S 64 0E 03 40 9C C0 5D 03 00 FF 07 A0 0F 08 00 >> S 65 04 03 20 A0 >> S 6E 04 03 30 00 >> S 79 28 03 44 00 46 00 53 00 2D 00 55 00 49 00 20 00 46 00 34 00 30 00 >> 31 00 2D 00 32 00 30 00 31 00 31 00 31 00 30 00 32 00 >> S 7A 08 03 01 08 00 00 00 00 >> >> 7-2)huion-decode >> $ sudo huion-probe 6 3 | huion-decode > ~/huiondecode.txt >> Manufacturer: UC-LOIC? >> Product: TABLET 1060 >> Max X: 40000 >> Max Y: 24000 >> Max pressure: 2047 >> Resolution: 4000 >> Internal model: DFS-UI F401-2011102 >> >> >> 7-2)Calculation >> Active Area 10"x6" >> MaxX / Width = MaxY / Height = Resolution >> >> *40000/Width =4000 >> hence Width=10 >> >> *24000/Height=4000 >> hence Height=6 >> >> Best regards, >> Masaru Hirano >> Neoblast Inc. >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> On 2014年12月15日 02:00, Nikolai Kondrashov wrote: >>> Hi Masaru, >>> >>> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>>> Hello Nick >>>> >>>> Thanks for your support. >>>> We are Ugee distributer in japan. >>>> Please let us know how to make driver. >>>> >>>> We would like to build ugee tablet driver. >>>> VID=5543 >>>> PID=0081 >>>> These are all fine. >>>> VID=5543 >>>> PID=0045 >>>> These are not work fine. >>>> Calibration does not been succeed. >>> >>> I've made a very simple change to the digimend-kernel-drivers package, >>> which >>> has a slight possibility of making them work. I've simply added both >>> of the >>> product IDs you sent to the list of devices supported by the hid-huion >>> driver, >>> so it would treat them exactly as Huion tablets. >>> >>> The change is available in the "ugee" branch on GitHub, which you can >>> download >>> here: >>> https://github.com/DIGImend/digimend-kernel-drivers/archive/ugee.zip >>> >>> Please try building, installing and using the driver with your >>> tablets. We >>> might just be lucky and they might work. >>> >>> Nick >>> >>> On 11/06/2014 07:30 AM, Masaru Hirano wrote: >>>> Hello Nick >>>> >>>> Thanks for your support. >>>> We are Ugee distributer in japan. >>>> Please let us know how to make driver. >>>> >>>> We would like to build ugee tablet driver. >>>> VID=5543 >>>> PID=0081 >>>> These are all fine. >>>> VID=5543 >>>> PID=0045 >>>> These are not work fine. >>>> Calibration does not been succeed. >>>> >>>> If you give me some procedure and tools for making tablet and tablet >>>> monitor driver. >>>> I would like to make. >>>> Under ubuntu studio 14.04 >>>> >>>> File 1: >>>> VID=5543 >>>> PID=0081 >>>> are work fine. >>>> >>>> File 2: >>>> We would like to build for them. >>>> >>>> We are small company of system integrator for creative buginners. >>>> So we need to provide no wacom tablet and ubuntu-studio 14.04 for >>>> cost effective in Japan. >>>> >>>> Ofcource when we made new driver, we will share for everyone. >>>> >>>> Best regards, >>>> Masaru Hirano >>>> Neoblast Inc. >>>> >>>> On 2014年11月05日 18:24, Nikolai Kondrashov wrote: >>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>>> tablets >>>>>> which you found working with our tablets >>>>> >>>>> I meant "our drivers", of course. >>>>> >>>>> Nick >>>>> >>>>> On 11/05/2014 11:22 AM, Nikolai Kondrashov wrote: >>>>>> Hello Masaru, >>>>>> >>>>>> I'm very glad to hear that another tablet distributor is choosing to >>>>>> contribute their effort to making Linux drivers for their tablets. >>>>>> >>>>>> This year Yiynova helped with drivers for their tablets as well, and >>>>>> now have >>>>>> a bunch of models supported. >>>>>> >>>>>> We would appreciate it, if you could provide us with a list of Ugee >>>>>> tablets >>>>>> which you found working with our tablets, along with their USB >>>>>> VID:PID >>>>>> pairs, >>>>>> so we can add them to the list and advertise their support. >>>>>> >>>>>> Regarding the so far unsupported tablets, I would also like to know >>>>>> their >>>>>> names and VID:PID pairs, along with their parameters (if those are >>>>>> unavailable >>>>>> on the web). I would also like to know which hardware they're based >>>>>> on, if >>>>>> possible. Is it UC-Logic, Waltop, anything else? >>>>>> >>>>>> This would get us started. >>>>>> >>>>>> Thank you. >>>>>> >>>>>> Sincerely, >>>>>> Nick >>>>>> >>>>>> On 11/05/2014 03:42 AM, Masaru Hirano wrote: >>>>>>> Hello developper >>>>>>> >>>>>>> We are neoblast inc japan. >>>>>>> We are one of Ugee Distributer. >>>>>>> >>>>>>> There are few driver for ugee. >>>>>>> Most of product work by digemend kernel driver. >>>>>>> But some product (tablet monitor, sketch=pad) do not work. >>>>>>> http://ugee.net/index.asp >>>>>>> >>>>>>> We use ubuntu-studio 14.04. >>>>>>> >>>>>>> Digemend kernel driver are not enough for us. >>>>>>> There are no friver for tablet monitor for ubuntu 14.04. >>>>>>> >>>>>>> We would like to build by ourseleves. >>>>>>> Please let us know how to make kernel driver. >>>>>>> >>>>>>> best regards, >>>>>>> Masaru Hirano >>>>>>> neoblast inc. >>>>> >>>>> >>>>> >>> >>> >>> >> > > > -- ========================================= Masaru Hirano Neoblast Inc. Tokiwadai1-67-5-704, Itabashi-ku, Tokyo, Japan ZIP:174-0071 E-Mail:mh...@ne... Tel:+81-3-4570-7345 Mob:+81-70-6575-1732 Fax:+81-20-4623-9249 ========================================= |
|
From: Nikolai K. <sp...@gm...> - 2015-01-25 14:05:34
|
Hello Masaru, On 01/22/2015 01:40 PM, Masaru Hirano wrote: > Hello Nick > > Thanks for waiting for my reply. Congrats on getting well! > Tests are over. > I have atatced the result. > > M1000L,M708,M860 are work fine. > Thanks. Good. Could you please explain your testing method? It is important to be sure the driver really works. Have you tested on a fresh Linux install? Which distro? Could you please send the output of "evtest" command for one of the working tablets when you do the "pen coordinates sample" as shown here: https://www.youtube.com/watch?v=ysYk8KLY98U > Other products will be collected the data. > > If you have information how to modify source code, > please let me know. Sure. Thank you. Nick |
|
From: Masaru H. <mh...@ne...> - 2015-02-03 00:55:08
|
Hello Nick Thanks for M1000L,M708,M860. They work fine. We use ubuntu-studio 14.04 for driver and dump. We use ubuntu-studio 12.04, 14.04, windows7, windows8.1 for application. They are all deferent machine. At first they are fresh install but there are many tablets to test. So every device are connected same machine for test without re-install. We have out-lined memo for preparing testing-enviroment and procedure as enclosed word file. Red lines shows collected data. Additional tests data are zip file. 1010B,EX07,M540,M708,M1000L,SP101(Penate10.1) If you need more data collection to work, please let me know. Best regards, Masaru Hirano Neoblast Inc. On 2015���01���25��� 23:05, Nikolai Kondrashov wrote: > Hello Masaru, > > On 01/22/2015 01:40 PM, Masaru Hirano wrote: >> Hello Nick >> >> Thanks for waiting for my reply. > > Congrats on getting well! > >> Tests are over. >> I have atatced the result. >> >> M1000L,M708,M860 are work fine. >> Thanks. > > Good. Could you please explain your testing method? > It is important to be sure the driver really works. > Have you tested on a fresh Linux install? Which distro? > > Could you please send the output of "evtest" command for one of the working > tablets when you do the "pen coordinates sample" as shown here: > > https://www.youtube.com/watch?v=ysYk8KLY98U > >> Other products will be collected the data. >> >> If you have information how to modify source code, >> please let me know. > > Sure. > > Thank you. > > Nick > > -- ========================================= Masaru Hirano Neoblast Inc. Tokiwadai1-67-5-704, Itabashi-ku, Tokyo, Japan ZIP:174-0071 E-Mail:mh...@ne... Tel:+81-3-4570-7345 Mob:+81-70-6575-1732 Fax:+81-20-4623-9249 ========================================= |
|
From: Nikolai K. <sp...@gm...> - 2015-02-16 18:48:30
|
On 02/03/2015 02:54 AM, Masaru Hirano wrote: > Hello Nick > > Thanks for M1000L,M708,M860. > They work fine. > > We use ubuntu-studio 14.04 for driver and dump. > We use ubuntu-studio 12.04, 14.04, windows7, windows8.1 for application. > They are all deferent machine. > At first they are fresh install but there are many tablets to test. > So every device are connected same machine for test without re-install. > > We have out-lined memo for preparing testing-enviroment and procedure > as enclosed word file. > Red lines shows collected data. > > Additional tests data are zip file. > 1010B,EX07,M540,M708,M1000L,SP101(Penate10.1) > > If you need more data collection to work, please let me know. Ah, I see you made a copy to the maillist after all, thank you, Masaru. Nick |
|
From: Nikolai K. <sp...@gm...> - 2015-02-16 11:18:07
|
Hello Masaru,
Please don't forget to keep DIG...@li... in the CC so
we can have our conversation archived and accessible to others. Thank you.
On 02/02/2015 01:27 PM, Masaru Hirano wrote:
> Hello Nick
>
> Thanks for M1000L,M708,M860.
> They work fine.
>
> We use ubuntu-studio 14.04 for driver and dump.
> We use ubuntu-studio 12.04, 14.04, windows7, windows8.1 for application.
> They are all deferent machine.
> At first they are fresh install but there are many tablets to test.
> So every device are connected same machine for test without re-install.
>
> We have out-lined preparing testing-enviroment and procedure
> as enclosed word file.
> Red lines shows collected data.
>
> Additional tests data are zip file.
> 1010B,EX07,M540,M708,M1000L,SP101(Penate10.1)
>
> If you need more date to work, please let me know.
Thank you for comprehensive diagnostic dumps. They will come in useful for
future drivers.
However, I'd like to have a confirmation that M1000L, M708 and M860 work with
digimend-kernel-drivers [1] properly, before I add their support to a release.
From the evtest dumps you sent I see that M708 works correctly. Was it tested
with the digimend-kernel-drivers installed?
From the same dumps, I see that Ugee-1000L is *not* working properly. Was it
tested with the drivers installed?
I don't see M860 in the dumps you sent.
I need to have a proof they (M1000L, M708, M860) work, before I can release
their support. They must work *without* the WizardPen driver. Could you please
test them on a freshly installed machine? I'll try to outline the procedure.
1. Get a fresh install of a Linux distro.
2. Install the Ugee branch of digimend-kernel-drivers [1].
3. Install evtest.
4. Install a few drawing applications. At least The GIMP and MyPaint.
Optional, but good to do.
5. Connect the tablet.
6. Start evtest and select the pen interface (it's the one which reports data
on pen movement), do the pen coordinates sample [2], send me the resulting
file. The same as you did before, but this time making sure the driver is
installed.
7. Set up drawing applications and test that they can detect varied pressure
and all of the pen button clicks. Send a screenshot which shows strokes
with varied pressure. Optional, but good to do.
Thank you.
[1]: https://github.com/DIGImend/digimend-kernel-drivers/archive/ugee.zip
[2]: https://www.youtube.com/watch?v=ysYk8KLY98U
|
Thanks for helping keep SourceForge clean.
X