Re: [Dgtnix-devel] Sim Info

[Random P. <net...@gm...>]

Oh Okay, I was thinking there might be an order it had to go in maybe
the clock sent other packets first before Mode 23.

I loaded up ollydbg and IDA and was able to find the functions in
DGTEBDLL.dll that BWTIME:Decode, the low level driver protocol seems
to bit a bit different. I was able to get the driver to say it was in
Mode 23 when calling _DGTDLL_ClockMode, yet still no messages from
Arena about blacks movements being sent to the clock.

On Thu, Apr 14, 2011 at 8:27 AM, Jan Krabbenbos <ja...@dg...> wrote:
> The mode 23 is sent from the clock to the computer (via the board) at the moment it is set by a person selecting this mode on the clock. This also goes for the start/stop button.
>
> The SETNRUN command is given by the computer to the clock (via the board) to set a time on the clock and to tell the clock which side should run. This only works on the clock in mode 23.
>
> If you want to show a message on the clock DGT_CMD_CLOCK_MESSAGE command (as described in the low level driver) must be used to display and a DGT_CMD_END_CLOCK_MESSAGE to return back to the time display. This results in the ready for disps acknowledgement, if I'm correct.
>
> To my knowledge the board does not store the clock acknowledgments, the driver has to do this.
>
> With kind regards,
> Met vriendelijke groet,
>
> Jan Krabbenbos
> Software Development
>
> Phone: +31(0) 53-4305195
> Fax: +31(0)53-4329365
> http://www.dgtprojects.com
>
> visit address: Hengelosestraat 66, 7514 AJ  Enscheded, The Netherlands
> mail address: PO Box 1295, 7500 BG  Enschede, The Netherlands
>
>
>>-----Original Message-----
>>From: Random Persons [mailto:net...@gm...]
>>Sent: donderdag 14 april 2011 13:16
>>To: Main discussion place for dgtnix relative topics
>>Subject: Re: [Dgtnix-devel] Sim Info
>>
>>Well, I would say I am missing when exactly Mode 23 is sent to the PC.
>>Clock version info has a request, and I send the Mode 23 after I send
>>the clock version.
>>
>>Here is some of the low level driver code I used it to check my Mode
>>23 to make sure it was being sent correctly.
>>
>>http://ideone.com/q1WF3
>>
>>There are three ack Messages in DGT_BWTIME this is from the low level
>>driver
>>0x81  // Ready for disps
>>0x88  // Start/Stop button pressed
>>0x8a // Clock Mode
>>
>>then there is the other one
>>SETNRUN (Clock Mode = 23) where it sets the clockMode to 23 I am guess
>>you send this BWTime when a DGT_CMD_CLOCK_SETNRUN is sent from the
>>computer.
>>
>>
>>
>
> ------------------------------------------------------------------------------
> Benefiting from Server Virtualization: Beyond Initial Workload
> Consolidation -- Increasing the use of server virtualization is a top
> priority.Virtualization can reduce costs, simplify management, and improve
> application availability and disaster protection. Learn more about boosting
> the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev
> _______________________________________________
> Dgtnix-devel mailing list
> Dgt...@li...
> https://lists.sourceforge.net/lists/listinfo/dgtnix-devel
>