Re: [Devmon] probe monitoring present / not present no snmp data found

[Steve B <rec...@gm...>]

That is the strange thing about this. If I individually snmpwalk all those
oids (with probe removed), they give good results. Except of course the
ibmupstmp which just gives an empty result as one would expect.  I checked
all the transforms already, all use different names.

On Tue, Jan 26, 2016 at 3:04 PM, W.J.M. Nelis <Wim...@nl...> wrote:

> Hello  Steve,
>
> > here is what I have in the ibmups template I have made (in terms of oids)
> >
> > check/column:batt-capacity
> >
> > upsBatteryStatus        : .1.3.6.1.2.1.33.1.2.1.0               : leaf
> > upsEstimatedminsrem     : .1.3.6.1.2.1.33.1.2.3.0               : leaf
> > upsEstimateChargerem    : .1.3.6.1.2.1.33.1.2.4.0               : leaf
> > upsBattVoltage          : .1.3.6.1.2.1.33.1.2.5.0               : leaf
> >
> > check/column:ibmupspwr
> >
> > inputvolt       : .1.3.6.1.2.1.33.1.3.3.1.3.1 : leaf
> > inputfreq       : .1.3.6.1.2.1.33.1.3.3.1.2.1 : leaf
> > outputvolt      : .1.3.6.1.2.1.33.1.4.4.1.2.1 : leaf
> > outputcurr      : .1.3.6.1.2.1.33.1.4.4.1.3.1 : leaf
> > outputpwr       : .1.3.6.1.2.1.33.1.4.4.1.4.1 : leaf
> > outputloadlvl   : .1.3.6.1.2.1.33.1.4.4.1.5.1 : leaf
> >
> > check/column:ibmupstmp
> >
> > IBMTemp         : 1.3.6.1.4.1.534.1.6.5.0               : leaf
> > IBMHumi         : 1.3.6.1.4.1.534.1.6.6.0               : leaf
> >
> > For temperature output, it says unknown and the other checks all have
> > unknown/no data (with no SNMP data in logs)
> >
> > Is it perhaps something to do with the ending in 0 or not? I do remember
> > testing those out.
>
> I don't think that the last digit of the OID does matter.
>
> Assuming that also the OIDS defined in the transforms-files all have
> different names, the next thing you could check is the behaviour of the IBM
> UPS device. If the temperature-probe is removed, can you get the
> information of all the OIDs starting with ".1.3.6.`.2.1.33", using a basic
> utility like snmpget? If so, there must be something wrong in devmon. If
> not so, the UPS is behaving strangely.
>
> Regards,
>    Wim Nelis.
>
>
>
>
>
> ------------------------------------------------------------------------------
> Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>