Menu
▾
▴
Re: [Devmon] No SNMP data found for..
|
From: Ken C. <kco...@ry...> - 2015-11-12 13:36:30
|
Odd...last thing....had something similar as well and was pulling my hair out....build each file for your template manually. I had something off once which I kept missing...but I kept copying the template dir to another and tweaking thus copying over the error. On Nov 12, 2015 4:18 AM, "Steve B" <rec...@gm...> wrote: > Yea I know what you mean, seen a lot of that too. I had already played the > baby steps game and not even one works and appears as 'unknown' even if I > can snmpwalk it with reply. I have checked for spaces throughout or > something else that might cause this to do this. I even used another part > of the MIB tree and made a new check and same results, the only oids I can > use are the ones I use for sensors. > > Can't say this is the first time I have encountered this but usually it > works after a while, by using baby steps etc.. > > Thanks for your input. Not sure what I will do now. > > On Wed, Nov 11, 2015 at 9:28 PM, Ken Connell <kco...@ry...> wrote: > > > If you can get a value back via snmpwalk, then I'd say go the "baby > steps" > > route and start with just one. > > > > I've seen where some oids which are not valid mess up everything else in > > the mix....kinda like a domino effect. > > On Nov 11, 2015 3:24 PM, "Steve B" <rec...@gm...> wrote: > > > > > I have also seen quite a few that don't work or wrongly programmed as > > > branch when should be leaf. > > > > > > Snmpwalk does work and gives a value, just not with a zero on the end. > > > > > > On Wed, Nov 11, 2015 at 7:06 PM, Ken Connell <kco...@ry...> > > wrote: > > > > > > > If you can't get a value back manually via snmpwalk, then your SOL. > > > > > > > > I find many times there are branches & leaf oid objects listed which > > > never > > > > work for that host or code level. > > > > On Nov 11, 2015 1:00 PM, "Steve B" <rec...@gm...> wrote: > > > > > > > > > Had tried it with a zero at the end already: By the way, if I > > snmpwalk > > > > with > > > > > a zero I get: > > > > > SNMPv2-SMI::experimental.94.1.6.1.3.0 = No Such Instance currently > > > exists > > > > > at this OID > > > > > so no dice on that alas. > > > > > > > > > > On Wed, Nov 11, 2015 at 6:06 PM, Ken Connell <kco...@ry...> > > > > wrote: > > > > > > > > > > > Are you sure the leaf objects don't end with a .0 ? > > > > > > > > > > > > >From the top of my head I'm pretty sure they do.....so tac it on > > and > > > > > try. > > > > > > On Nov 11, 2015 11:40 AM, "Steve B" <rec...@gm...> wrote: > > > > > > > > > > > > > Hi All, > > > > > > > > > > > > > > I am making a template for an HP P2000 G3 and I have a nice > table > > > > > showing > > > > > > > all the status for the sensors. They look like this: > > > > > > > > > > > > > > SensorHex : .1.3.6.1.3.94.1.8.1.1 : branch > > > > > > > SensorIdx : .1.3.6.1.3.94.1.8.1.2 : branch > > > > > > > SensorName : .1.3.6.1.3.94.1.8.1.3 : branch > > > > > > > SensorStatus : .1.3.6.1.3.94.1.8.1.4 : branch > > > > > > > SensorValue : .1.3.6.1.3.94.1.8.1.6 : branch > > > > > > > SensorType : .1.3.6.1.3.94.1.8.1.7 : branch > > > > > > > SensorMetric : .1.3.6.1.3.94.1.8.1.8 : branch > > > > > > > > > > > > > > I am using the FCMGMT-MIB for this. > > > > > > > > > > > > > > Now say I want to make a new check, connectivity and start > > looking > > > > at: > > > > > > > > > > > > > > connUnitType : .1.3.6.1.3.94.1.6.1.3 : > > > leaf > > > > > > > connUnitNumports : .1.3.6.1.3.94.1.6.1.4 : > > > leaf > > > > > > > connUnitState : .1.3.6.1.3.94.1.6.1.5 : > > > leaf > > > > > > > connUnitStatus : .1.3.6.1.3.94.1.6.1.6 : > > > leaf > > > > > > > connUnitProduct : .1.3.6.1.3.94.1.6.1.7 : > > > leaf > > > > > > > > > > > > > > after putting these into the message file, I have 'unknown' for > > all > > > > the > > > > > > > oids on my html page and in the devmon log file I have No SNMP > > data > > > > > found > > > > > > > for connUnitType etc When I look at the mib info here: > > > > > > > > > > > > > > http://www.circitor.fr/Mibs/Html/FCMGMT-MIB.php > > > > > > > or > > > > > > > http://www.oidview.com/mibs/0/FCMGMT-MIB.html > > > > > > > > > > > > > > it looks as if this is branch info even if it's only on one > line. > > > So > > > > I > > > > > > > tried using branch instead of leaf and made a table entry in > > > message > > > > > and > > > > > > > then I had worldwide purple for devmon and had to restart it. > Too > > > > many > > > > > > > forks or similar..iirc > > > > > > > > > > > > > > Now I know this is a tough question but does anyone know why > this > > > is > > > > > > > happening? I should still be able to use this as a leaf (the > > > snmpwalk > > > > > > gives > > > > > > > the value I am expecting to see) but it just won't digest my > > > > > > information. I > > > > > > > am spefically interested in the 'No SNMP data found' and the > > > unknown > > > > > > when a > > > > > > > manual snmpwalk -v2c -c blabla is fine > > > > > > > > > > > > > > cheers > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > _______________________________________________ > > > > > > > Devmon-support mailing list > > > > > > > Dev...@li... > > > > > > > https://lists.sourceforge.net/lists/listinfo/devmon-support > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > _______________________________________________ > > > > > > Devmon-support mailing list > > > > > > Dev...@li... > > > > > > https://lists.sourceforge.net/lists/listinfo/devmon-support > > > > > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > _______________________________________________ > > > > > Devmon-support mailing list > > > > > Dev...@li... > > > > > https://lists.sourceforge.net/lists/listinfo/devmon-support > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > > > > Devmon-support mailing list > > > > Dev...@li... > > > > https://lists.sourceforge.net/lists/listinfo/devmon-support > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > _______________________________________________ > > > Devmon-support mailing list > > > Dev...@li... > > > https://lists.sourceforge.net/lists/listinfo/devmon-support > > > > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > > Devmon-support mailing list > > Dev...@li... > > https://lists.sourceforge.net/lists/listinfo/devmon-support > > > > ------------------------------------------------------------------------------ > _______________________________________________ > Devmon-support mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devmon-support > |
