From: Steve B <rec...@gm...> - 2015-11-11 20:23:58
|
I have also seen quite a few that don't work or wrongly programmed as branch when should be leaf. Snmpwalk does work and gives a value, just not with a zero on the end. On Wed, Nov 11, 2015 at 7:06 PM, Ken Connell <kco...@ry...> wrote: > If you can't get a value back manually via snmpwalk, then your SOL. > > I find many times there are branches & leaf oid objects listed which never > work for that host or code level. > On Nov 11, 2015 1:00 PM, "Steve B" <rec...@gm...> wrote: > > > Had tried it with a zero at the end already: By the way, if I snmpwalk > with > > a zero I get: > > SNMPv2-SMI::experimental.94.1.6.1.3.0 = No Such Instance currently exists > > at this OID > > so no dice on that alas. > > > > On Wed, Nov 11, 2015 at 6:06 PM, Ken Connell <kco...@ry...> > wrote: > > > > > Are you sure the leaf objects don't end with a .0 ? > > > > > > >From the top of my head I'm pretty sure they do.....so tac it on and > > try. > > > On Nov 11, 2015 11:40 AM, "Steve B" <rec...@gm...> wrote: > > > > > > > Hi All, > > > > > > > > I am making a template for an HP P2000 G3 and I have a nice table > > showing > > > > all the status for the sensors. They look like this: > > > > > > > > SensorHex : .1.3.6.1.3.94.1.8.1.1 : branch > > > > SensorIdx : .1.3.6.1.3.94.1.8.1.2 : branch > > > > SensorName : .1.3.6.1.3.94.1.8.1.3 : branch > > > > SensorStatus : .1.3.6.1.3.94.1.8.1.4 : branch > > > > SensorValue : .1.3.6.1.3.94.1.8.1.6 : branch > > > > SensorType : .1.3.6.1.3.94.1.8.1.7 : branch > > > > SensorMetric : .1.3.6.1.3.94.1.8.1.8 : branch > > > > > > > > I am using the FCMGMT-MIB for this. > > > > > > > > Now say I want to make a new check, connectivity and start looking > at: > > > > > > > > connUnitType : .1.3.6.1.3.94.1.6.1.3 : leaf > > > > connUnitNumports : .1.3.6.1.3.94.1.6.1.4 : leaf > > > > connUnitState : .1.3.6.1.3.94.1.6.1.5 : leaf > > > > connUnitStatus : .1.3.6.1.3.94.1.6.1.6 : leaf > > > > connUnitProduct : .1.3.6.1.3.94.1.6.1.7 : leaf > > > > > > > > after putting these into the message file, I have 'unknown' for all > the > > > > oids on my html page and in the devmon log file I have No SNMP data > > found > > > > for connUnitType etc When I look at the mib info here: > > > > > > > > http://www.circitor.fr/Mibs/Html/FCMGMT-MIB.php > > > > or > > > > http://www.oidview.com/mibs/0/FCMGMT-MIB.html > > > > > > > > it looks as if this is branch info even if it's only on one line. So > I > > > > tried using branch instead of leaf and made a table entry in message > > and > > > > then I had worldwide purple for devmon and had to restart it. Too > many > > > > forks or similar..iirc > > > > > > > > Now I know this is a tough question but does anyone know why this is > > > > happening? I should still be able to use this as a leaf (the snmpwalk > > > gives > > > > the value I am expecting to see) but it just won't digest my > > > information. I > > > > am spefically interested in the 'No SNMP data found' and the unknown > > > when a > > > > manual snmpwalk -v2c -c blabla is fine > > > > > > > > cheers > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > _______________________________________________ > > > > Devmon-support mailing list > > > > Dev...@li... > > > > https://lists.sourceforge.net/lists/listinfo/devmon-support > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > _______________________________________________ > > > Devmon-support mailing list > > > Dev...@li... > > > https://lists.sourceforge.net/lists/listinfo/devmon-support > > > > > > > > ------------------------------------------------------------------------------ > > _______________________________________________ > > Devmon-support mailing list > > Dev...@li... > > https://lists.sourceforge.net/lists/listinfo/devmon-support > > > > ------------------------------------------------------------------------------ > _______________________________________________ > Devmon-support mailing list > Dev...@li... > https://lists.sourceforge.net/lists/listinfo/devmon-support > |